Help! I watched the video before swapping out my carburetor. I took out the vacuum lines indiscriminately and now I have no vacuum for the 3 vacuum lines that connect to the distributor. I see that there is a vacuum port on the carburetor… Not sure what to do. Convert the distributor to mechanical advance? What did you do?
@boosted_2j4 күн бұрын
Does any have a link to where i can buy the rebuikd kit for this. Iv search and cant find it. I have the 35f a000 transmission. 97 d16y7 trans.
@joshbruv29837 күн бұрын
Hey man i brought the same K740 kit for my 16 valve 4AF engine do you know what size air correctors and main primary and secondary keys are on urs?
@JaredMaliksi9 күн бұрын
Mine has a leak near the speed sensor I have no idea where it comes from the mechanic told me that it comes from the oil seal inside but I can't imgagine that the oil is leaking from the outside near the speed sensor of the tranmission. I wanted to send some pic but I cannot make or private message you. Please help. Thank you so much.
@JaredMaliksi9 күн бұрын
I like how you installed the transmission. I have some problem with mine i hope you can help me out.
@psemeq18 күн бұрын
Thanks. Need to change worn out bearings. It's not so complicated
@EthanStone-u4yАй бұрын
Havin trouble with taking the gears out
@hondatips8477Ай бұрын
Could you share the information on where to get the synchronizers, I would greatly appreciate the help. I subscribed.
@ShepherdsChapelonYTАй бұрын
Great car I've owned three last generation Tercels the last two people destroyed driving recklessly. I've drove in many of the older ones many of my friends growing up couldn't afford fancy cars. Oh the places the Tercel has taken us one of Toyotas best cars.
@kadence3222 ай бұрын
I know this video is 3 years old but where did you get the seal driver tools?
I'm doing this job right now and my final drive bolts came out looking a little like yours, with the top of the threaded part a little stressed. Is it okay to re-use them?? Or should I break down and get new ones?
@danchristian72823 ай бұрын
Thanks for the video man, shows me some details that other youtubers didn't explain.. My big question is (hopefully the wording is correct) when you are installing the gear stacks, do you need to have the transmission in neutral? Not only where the shift linkage goes but the stacks themselves..? idk maybe there is only one way for the gear stacks and forks to be lined up when it goes back together and the case is sealed up? I just find that when I have everything lined up and put back together, I can go thru the gears and spin the input shaft but when I get to 4th gear the selector ring (on the gear stack) doesn't want to fully go up and into 4th gear.. Sorry this is hard to explain when I barely know what's going on in this damn thing lmao
@user-be9wv4sh7v3 ай бұрын
man you are very talented
@user-be9wv4sh7v3 ай бұрын
nice very nice information
@user-rh9su9cr4d3 ай бұрын
Love these cars
@04tacomaguy14 ай бұрын
Are the synchros for the y7 the same as the y8? I’m trying to find the rebuild kit and they all say ex but I assume they are the same internally except for the gear teeth count.. any help would be appreciated 😅
@04tacomaguy14 ай бұрын
Damn slime you a pro (young thug voice) lol
@kadence3225 ай бұрын
Where did you get the print out instructions for this?
@jonathans53187 ай бұрын
That's your ass when Mom sees that blanket lol
@slimesspeedshoptv7 ай бұрын
haha she approved this rebuild!
@Crozbyguy-rg1iu7 ай бұрын
So it's been awhile, what kind of performance did you get? My friend is having low power issues on a newly rebuilt engine. Has a weber from a Celica on it. Not sure what the CFM is, but says it's under powered and running rich.
@marklance0338 ай бұрын
My 99 civic has a serious transmission fluid leak in between the engine and transmission. Where would it be coming from?
@slimesspeedshoptv7 ай бұрын
you sure its not motor oil coming from the rear main seal?
@marklance0337 ай бұрын
@@slimesspeedshoptv It is 100%transmission fluid.
@slimesspeedshoptv7 ай бұрын
manual or auto trans?@@marklance033
@marklance0337 ай бұрын
@@slimesspeedshoptv manual.
@eddie75348 ай бұрын
still waiting for the part2 :)
@mwobobiasroundup8 ай бұрын
This is beautiful to watch, the music is perfect. New subscriber from Meru county in Kenya
@KOHD-ic9pw9 ай бұрын
Space age magical pimping 💯💨
@lowtus79 ай бұрын
Is the unshielded side of the bearing not meant to go towards the diff?
@Rogers19773 ай бұрын
I'm doing this job currently and got new diff bearings for the job. The new ones are unshielded, but the ones that came off are shielded. I'm guessing Honda updated the design and the shielding isn't *really* necessary. The whole thing sits in trans fluid all the time anyways.
@NICOLASARTSHAMBOW9 ай бұрын
Nice
@slimesspeedshoptv7 ай бұрын
TY!
@Mathewmartialart9 ай бұрын
and then.... he gave up doing videos
@slimesspeedshoptv9 ай бұрын
pretty much.
@Mathewmartialart9 ай бұрын
@@slimesspeedshoptv why though, as im pretty sure you continued filming the process. Or did you literally stop filming at that point
@slimesspeedshoptv7 ай бұрын
I have the motor halfway put together... tons of film on my laptop. Life gets in the way and got tired of editing.... these comments make me wanna get back on it though!@@Mathewmartialart
@frog99610 ай бұрын
Where does the hose on top of valve cover go?
@Cacique80911 ай бұрын
What's the size of the plug you guys used near the front of the manifold. Having trouble finding a plug. Thanks.
@slimesspeedshoptv11 ай бұрын
I removed it and went down to my local hardware store,, was a typical NPT fitting size was easy to find!
@Cacique80911 ай бұрын
Just picked up a 1982 Toyota Tercel. Carb looks like rats been chewing on it. Could find a good diagram for the endless vacuum hoses. Found your video and ordered a Weber. Just hoping I can get it installed correctly. 😅
@allentang8033 Жыл бұрын
What size was that bolt that went into the exhaust side of the EGR?I went to every hardware store locally and can’t find what I need =[
@allentang8033 Жыл бұрын
Found a drain plug that worked! M20 x 1.5
@Cacique80911 ай бұрын
Hey, you happen to know the size for the other plug on the manifold? @@allentang8033
@slimesspeedshoptv11 ай бұрын
should be a regular metric size,, we have tacoma screw over here so I went there!
@MasterRello Жыл бұрын
hit dat follow when i heard that mac 🤌🏼
@aimannas3850 Жыл бұрын
have the same engine and same weber 3236, can you tell me how much turns for the misture, and turns for the idle needle
@slimesspeedshoptv11 ай бұрын
gonna have to play with it, your elevation will affect the turns slightly
@joshbruv29837 күн бұрын
The mixture is supposed to be set to 1 and half or 1 and 3 quarters when seated
@axelmoiseslaham452 Жыл бұрын
Nice work really clean
@boosted_2j Жыл бұрын
Part number for the axle seals ?
@bryanmora4996 Жыл бұрын
Where did you get your synchro set? I am looking for those
@Jpower32 Жыл бұрын
What year Honda did this transmission come off of? and What's the difference on the other Desires transmission s...?? Thanks!
@murry001 Жыл бұрын
I'm thinking of getting a 2004 Altezza with the Beams engine. Is it reliable, parts easily available?
@marioalves7610 Жыл бұрын
Damn where is part 2
@slimesspeedshoptv11 ай бұрын
damn y'all really want it??
@Mathewmartialart9 ай бұрын
@@slimesspeedshoptv i mean what was the fucking point of doing this video, if you had zero intentions of doing any other videos in the past 2 years, and then your shocked that people actually want to see the so called disassembly of the engine
@infinite540 Жыл бұрын
Great video man 👏
@jimjoe9945 Жыл бұрын
Why the " music"?
@driftking201o7 Жыл бұрын
Is that from a altezza?
@kurtsyy361 Жыл бұрын
yes
@slimesspeedshoptv11 ай бұрын
yep G-1
@BoomarangComet Жыл бұрын
Sexy Tercel, I bet it's a 86 as well
@tanwirshirzai5177 Жыл бұрын
Please bro I’m gunna start on my engine I needdd a part 2
@ZaraImmorta Жыл бұрын
Have come back to this video for months waiting for the new rebuild. Today might be the day! Been subbed for a while. Love your instructional vids on the trans.
@shaunsegree4587 Жыл бұрын
Great video waiting for part 2
@slimesspeedshoptv Жыл бұрын
maybe.... been awhile
@shaunsegree4587 Жыл бұрын
@@slimesspeedshoptv that's too bad but good luck with the build
@Shreddylife Жыл бұрын
Thanks for this video bro, I am going to be replacing the ISB and possibly the rest of the bearings on my B000 here real soon for my Boosted Vitara build 🙂 cheers