Genuine Redline Weber 32/36 K740 Install on my 1985 Toyota Tercel. Was pretty straight forward as ALL the vacuum components were removed. Enjoy Old-School Quality Car Content.
Пікірлер: 76
@ShepherdsChapelonYT15 күн бұрын
Great car I've owned three last generation Tercels the last two people destroyed driving recklessly. I've drove in many of the older ones many of my friends growing up couldn't afford fancy cars. Oh the places the Tercel has taken us one of Toyotas best cars.
@JulieWattsPhoto3 жыл бұрын
Cannot believe how unbelievably pristine that interior is!!
@slimesspeedshoptv9 ай бұрын
Thank you!!!
@promeow11275 ай бұрын
me too ive seen really good ones and that looks almost the best
@Cacique80910 ай бұрын
Just picked up a 1982 Toyota Tercel. Carb looks like rats been chewing on it. Could find a good diagram for the endless vacuum hoses. Found your video and ordered a Weber. Just hoping I can get it installed correctly. 😅
@ErikSandstrom3 жыл бұрын
Right on! I am swapping a Weber into my 1985 Tercel 4WD with 52k miles currently.
@slimesspeedshoptv3 жыл бұрын
sweet! mines a 85 with 73k, these are such fun lil cars
@Kozuto983 жыл бұрын
Great vid man! I'm considering doing the same carb swap on my 87 SR5 wagon. Didn't realize pretty much all the vacuum crap can be chucked so this was some good insight.
@slimesspeedshoptv3 жыл бұрын
oh yeah I junked all that vacuum stuff. I still gotta setup a catch can system for the 2 valve ports on top the valve cover.
@josiahwoodland7345 Жыл бұрын
I'm not doing an install, but this was really useful for me because i'm doing some carb work 👍
@HellHoundOne2 жыл бұрын
😍😍😍😍 dude. I had one of these as my first car. The five door auto (for four door with hatch). Damn that car hauled ass with the Weber’s.
@aaronbrennan2187 Жыл бұрын
Sweet lil ride I like it
@slimesspeedshoptv9 ай бұрын
Appreciate it !!
@Scott.Kristiansen3 жыл бұрын
Pimpin ain't easy but it's necessary...very nice ride sir.
@slimesspeedshoptv3 жыл бұрын
yes sir!! Thank you
@masterjack82223 жыл бұрын
Great video. That engine bay though, so spacious to do mechanics
@slimesspeedshoptv3 жыл бұрын
Thanks! Very enjoyable to work on these cars
@Swanselm Жыл бұрын
Sooo clean.
@wesgyde81223 жыл бұрын
Solid, I would recommend you throw in a fuel pressure regulator after that pump though. The carbs are meant for 3.5-4 the pumps pushing 7. Gonna blow some seals later on down the road.
@slimesspeedshoptv3 жыл бұрын
oh yeah thats the next thing I gotta do, definitely runs way too rich
@edwardanthony72832 жыл бұрын
Toyed with doing that to my 1980. Carb is high priced and there are quite a bit of vacuum lines on it.
@user-rh9su9cr4d2 ай бұрын
Love these cars
@mikelaventura21303 жыл бұрын
dope car ! and beats !
@slimesspeedshoptv3 жыл бұрын
wow thank you!! (:
@Cacique80910 ай бұрын
What's the size of the plug you guys used near the front of the manifold. Having trouble finding a plug. Thanks.
@slimesspeedshoptv9 ай бұрын
I removed it and went down to my local hardware store,, was a typical NPT fitting size was easy to find!
@mwobobiasroundup7 ай бұрын
This is beautiful to watch, the music is perfect. New subscriber from Meru county in Kenya
@KOHD-ic9pw7 ай бұрын
Space age magical pimping 💯💨
@sw201444 Жыл бұрын
How did you attach the stock throttle linkage?
@Crozbyguy-rg1iu6 ай бұрын
So it's been awhile, what kind of performance did you get? My friend is having low power issues on a newly rebuilt engine. Has a weber from a Celica on it. Not sure what the CFM is, but says it's under powered and running rich.
What plugs did you use to block off the holes in the manifold?
@slimesspeedshoptv3 жыл бұрын
take the sensors down to a regular hardware store and give me this NPT fitting. Just a brass piping piece that plugs instead of being like barbed. Teflon it up and you're good 2 go!
@brianmckitterick8223 жыл бұрын
I know this may be a long shot but do you still have that hose you took off the air filter?
@slimesspeedshoptv3 жыл бұрын
no I don't... sorry man!
@ownerfate Жыл бұрын
Question, do you remember where you attached the hose to the PVC valve?
@slimesspeedshoptv9 ай бұрын
The PVC valve goes back into the carb air intake. I will be attaching a catch can in-between for fun.
@allentang803310 ай бұрын
What size was that bolt that went into the exhaust side of the EGR?I went to every hardware store locally and can’t find what I need =[
@allentang803310 ай бұрын
Found a drain plug that worked! M20 x 1.5
@Cacique80910 ай бұрын
Hey, you happen to know the size for the other plug on the manifold? @@allentang8033
@slimesspeedshoptv9 ай бұрын
should be a regular metric size,, we have tacoma screw over here so I went there!
@aimannas3850 Жыл бұрын
have the same engine and same weber 3236, can you tell me how much turns for the misture, and turns for the idle needle
@slimesspeedshoptv9 ай бұрын
gonna have to play with it, your elevation will affect the turns slightly
@danhawkins23532 жыл бұрын
What kind of fuel pressure regulator should they put on there some of them are expensive
@slimesspeedshoptv2 жыл бұрын
i spent way too much money doing an aeromotive setup, however its the best of the best and will last me a lifetime so i don't mind! There are cheaper options out there that will work just fine, i mean you're only making 80-100hp!
@chrismc4102 жыл бұрын
Would this apply to a 88 Nova? Basically a 88 Corolla with quad lights? A 4AC series engine I believe?.
@notdylanlmao2 жыл бұрын
yes
@slimesspeedshoptv9 ай бұрын
more or less yes
@wakapassie26703 жыл бұрын
There is a hole under the air intake filter. It might take in dust .
@slimesspeedshoptv3 жыл бұрын
what exactly do you mean?
@wakapassie26703 жыл бұрын
On 8:40 . that chrome plate where the air filter sits on . there is a 1 centimetres circle hole . if you don't cover it . then the air filter is useless.
@slimesspeedshoptv3 жыл бұрын
@@wakapassie2670 ohhhh i see that now! didn't think about that... how should I cover it?
@wakapassie26703 жыл бұрын
You can cover it with a tube patch . the patch you use to patch flat bicycle tubes . as long as no air can pass trough.
@TheZaxx5 ай бұрын
I know this is a couple years old, but for anyone reading this... That hole is for the PCV intake.
@ernestocervantes88253 жыл бұрын
Fuel pressure regulator needed ?
@slimesspeedshoptv3 жыл бұрын
Technically yes. After dropping in the Weber your psi raises a bit. Would definitely recommend one, I will be coming out with a video installing one in the future!!
@EmileoMaitia2 жыл бұрын
Would you ever sell this Tercel?
@slimesspeedshoptv2 жыл бұрын
everything is for sale for the right price!
@pushhrodd012 жыл бұрын
hey bro good video! i plan on installing one of these on my 1977 corolla with a 2TC! my only question is i don’t know how would i hook up the auto tranny kick down cable? would i connect it to the throttle cable? also where did you buy this? can i see the website link bro bc i heard people be selling fake ones
@slimesspeedshoptv9 ай бұрын
I got mine on eBay, I have zero experience with weber carbs and auto transmissions... sorry!!
@hawaiiaction.19763 жыл бұрын
I got a 87 its front wheel drive.i see yours is rear wheel drive.
@slimesspeedshoptv3 жыл бұрын
mine is a 85 and its front wheel drive. For some reason these motors are facing straight, its really weird compared to all their other models but man does it make it easier to work on!
@hawaiiaction.19763 жыл бұрын
@@slimesspeedshoptv oh thats what it is very trippy.
@reynacastro92522 жыл бұрын
Is for sale or sold
@slimesspeedshoptv9 ай бұрын
keeping for life !
@MourningMountains3 жыл бұрын
is the original carb for sale?
@slimesspeedshoptv3 жыл бұрын
I scrapped that thing.
@MourningMountains3 жыл бұрын
@@slimesspeedshoptvdamn, bummer...
@slimesspeedshoptv3 жыл бұрын
@@MourningMountains can I ask why you need it? You live in California??
@MourningMountains3 жыл бұрын
@@slimesspeedshoptv yeah, in the east bay. our smog laws are wack.
@slimesspeedshoptv3 жыл бұрын
@@MourningMountains damn bro... glad I do not live there. WA has laws but a ton of shit slides, expect lately if you've seen the "takeovers" its ruining our culture up here. WA is next cali
@edwardanthony72832 жыл бұрын
So asinine when TBI could have been used instead & with more HP. Toyota really stuck it to us with that idiotic front wheel bearing assembly & the rear control arm assembly. Good reliable efficient car though.
@frankmonroy32242 жыл бұрын
Is the car is a rwd or ???????????
@notdylanlmao2 жыл бұрын
nah 85 tercel has straight engine fwd its weird
@slimesspeedshoptv9 ай бұрын
FWD car with a straight engine setup - kinda funky