Were you able to find parts I have the same one can't find parts need the float out of carburetor

My 127 fires up at the turn of the key.

I have Craftsman lawntractor with 17hp brigss engine, and it can pull priest out of choir boy. I have now sawme project going like yours was. I did same steps, first I grinded all the rust off then I applied rust converter. Now I need to paint it. Did your rust converter held well? Did you do anything to the underside?

Looks great, and great editing. The flat bar on your driveshaft should be perpendicular to the flat bar on the opposite side of the rubber coupler in the rag joint though. That way it can freely flex several degrees no matter where it is in the rotation. Otherwise it will bind, as you saw happen.

The best restore vid yet on the suburban. You have a good work ethic and take the time to do it right. Great job.

Amazing wrecker

I just purchased a 1972 149. Original owner took amazing care of it. There's two things I'd like to fix for it to be perfect. The first is the handle for the pressure release valves no longer functions. Is there a way to relieve the pressure with that lever not working? Second issue is the steering wheel shaft has a lot of slop in it. Im reading there's a bearing/bushing that is easily replaced?

This crazy. I watched your video last week and looked up the part on Amazon and saw a few kits at different prices. Took it apart today to confirm that was the problem thank to your helpful video. Tried to order the kit today and they all vanished, how could they all disappear in a week?

This is great, thanks for posting. At the 7:49 mark, as they are unloading the M4, there is what looks like a Greyhound behind it, but it also looks like it has 8 wheels. Anyone have an idea of what that might be?

Hi Buddy, I have exactly the same machine that has been through multiple owners, and everyone fiddled around with it to the stage where it would not work at all. Now I have it and I have sorted out the wiring and it starts easily now. My problem is that when I run it, the left wheel turns a lot faster than the right wheel. Can you maybe send me a photo of the steering box in place and connected as it should be, as I think they have something wrong wit the position of the gears and links to the rear end. Please send me photos from the left side and the right side so that I can see the position of thee links when nothing is activated. Thanks in advance.

hoe oud ook prachtig matriaal

I like presidents who aren’t convicted sexual predators. I like presidents who don’t sell documents to Russia. I like presidents who won elections honestly and didn’t collude with Russia to steal it from the real winner. I like presidents who don’t lie about stealing documents. I like presidents who don’t pay porn stars hush money to be quiet about consensual sex they had while their third wife gave birth to their fifth child. I like presidents who didn’t have secret bank accounts in China to accept bribes while in office. In other words; I don’t like Donald Trump. 😂😂😂😂😂😂

I like presidents who aren’t convicted sexual predators. I like presidents who don’t sell documents to Russia. I like presidents who won elections honestly and didn’t collude with Russia to steal it from the real winner. I like presidents who don’t lie about stealing documents. I like presidents who don’t pay porn stars hush money to be quiet about consensual sex they had while their third wife gave birth to their fifth child. I like presidents who didn’t have secret bank accounts in China to accept bribes while in office. In other words; I don’t like Donald Trump. 😂😂😂😂😂😂

I like presidents who aren’t convicted sexual predators. I like presidents who don’t sell documents to Russia. I like presidents who won elections honestly and didn’t collude with Russia to steal it from the real winner. I like presidents who don’t lie about stealing documents. I like presidents who don’t pay porn stars hush money to be quiet about consensual sex they had while their third wife gave birth to their fifth child. I like presidents who didn’t have secret bank accounts in China to accept bribes while in office. In other words; I don’t like Donald Trump. 😂😂😂😂😂😂

Someone was asking but their comment looks to have disappeared. The second 4-door sedan is the Datsun 710.

Must they be four HUSK MEN 4:00 to complete this Task?

Man THAT LOOKS AMAZING !!!!! can you tell me where you found the new blade guard/ strippers , I'm also rebuilding a gt5000 now and mine we're rusted also

That's beautiful

my dlt2000 has the same engine... dang oil filter always needs to be tightened before use haha had it since 2002

If you unloosen the screws you'll never get it apart. lol

I always tow hydros by lifting the back end.

Really love these videos. Just wondering if you have finished it yet? It’s been about 2 years since the last update

Thanks for the video. I have a 2001 gt3000 I'm restoring . Mine had a bad coil also.

Thank you for that information he's going to help me alot I sure do appreciate it

Great video. Thanks! I’ve had my i1046 for 18 years, and until this summer’s it’s treated me very well. Cutting about 1 1/4 acre with about 40 trees, the zero turn feature has been useful. Would I buy another? Nope. Servicing this mower is a bear! Lots of extra linkage to deal with, especially changing the drive belt that’s up in the tunnel. But, with about a thousand hours on it, I’ve only had to do a couple battery replacements, regular oil changes, linkage and spindle greasing, and blade sharpening (Until this year of course). This year needed some front axle tightening to eliminate excess steering wheel play, which also led to welding up a couple frame stress cracks behind the axle’s mounting position. Changed the drive belt, replaced the starter as the actuator was worn and caused a few broken flywheel teeth, and also replaced the flywheel ring gear. Hoping it’s sorted for a few more years. I’ve always wondered what’s going on inside that steering gearbox, and now I know. Wonder if that outer bolt with jam nut is to adjust gear-lash/play?

What is the name of this documentary?

Loooooove this video, me and a buddy flip mowers just for fun, and there's good profit in it, so we got one of these last week and WE LOVE IT... so we will b learning a lot of old school mechanics, DO YOU HAPEN TO HAVE A service manual you could e mail or were to get one, thx....will watch all the restoration 👌🔧👍

I call this calibrated steering. There are not 2 differentials but 2 independent hystats where each hystat has a variable displacement pump. The steering wheel sets the turning radius and the speed of the back wheels are calibrated to the steering wheel position to give the speed ratio to accommodate the turning radius.

It’s interesting they don’t lay something on the line like modern winching recommends. Can you imagine if that line snaps? You know some GI got fucked up back in the day

Anyway you can show me how your belts are rug up mine came off and I can’t find a schematic anywhere thanks!

California liptards👍

Preddy had 22 confirmed, NOT 31!!!!!!!!!!!!!!!!!

I had 2 of those Craftsman GT 5000. One was like new (2004) the other I acquired for parts. I bought the good one in 2019, from a friend that bought it new. He used it for 4 or 5 years. Then parked it in his shop. I had 2 acres to cut, it did a great job. My wife and I retired, down sized on the home and yard. Sold the good mower, took the engine off the parts mower put it on a Murry 40 inch cut . It had a 12.5 Briggs it had some serious problems, the top compression ring broke in 3 places . Would need a new piston and rings so i put the Kohler 25 horsepower V twin on. Does a very good job. 😊 Both of mine had the 6 speed manual transmission. It was easy to change the oil on those, drain.plugs, and a fill plug. Good luck with yours, those are good machines, in my opinion.

Great video. A great deal of help mine sitting in she for a few years. Ran when I put it up not running now! Hope this video will help

I’m not and expert but from what I understand the springs on your pto are not installed correctly. There’s some really good videos on KZbin about rebuilding them and having to bend the ends of the springs the the correct length for your pto.

Anyone know the proper alignment for gears ? I got it all back together to find it wasn't right and I'm not finding any good info online

I had the craftsman's version. Loved it. Except I had to fix the wiring for the PTO when I got it...tje warranty people were worthless. No diagnostic skills.

Bought new 2004 still runs strong.

You did a very nice job restoring the Outside of the deck, which i appreciated. But the underside is really Much more important to completely refinish... they rot out from underneath. Once it is brought to bare steel and has cured fresh paint, it'll shed grass as it should and not hold moisture against the pan ~

Awesome video!! You've inspired me to not allow time to pass with my restoration. I'm currently rebuilding an IH Cub Cadet 106, of which I'm sharing on my KZbin channel. I've joined the Int'l Cub Cadet forum, and that has been awesome. Hopefully today, we'll get a chance to powerwash my tractor, which is unfortunately covered in 20yrs if barn dirt and grime!!

Lucky Dog 🐕

kzbin.info/www/bejne/mX_chquiZbKLjbM ; D-DAY war reenactment on Santander beach, several videos of the day “Vehicles, Landing and paratroopers in a very interesting day of remembrance

I was recently given one of these in a similar condition, it has a bad crank seal on the bottom of the engine, gonna try firing it up before teardown

Look you left out a picture how the pulleys are on the spindles and routing the belts?

When is the Cub going to be done?

The grease fittings they put on those spindles are useless the bearings are sealed you can pack it with all the grease you want and it's not going to get in the bearings.

It's amazing how the metal production has gotten so terrible everything they make rusts out almost immediately it's like their intentionally building crap.

Where did u get the spendsls

Haven't read the other comments, but I do think your rear coupler on the rag joint should be 90 degrees apart, otherwise it is doing nothing and will bind.

Mr Mom clip is hilarious!