Do we have a price range estimate? Asking for parts budgeting purposes :3
@Rob165xКүн бұрын
The question is...can you access the filter without removing the bumper?
@bittersweet3028Күн бұрын
Hey, do you guys mind sharing the specs on the yellow 57dr you guys are running on your 86. Im thinking about getting the open box pair you guys have. Also, do you mind sharing alignment specs? Did you guys shave the rear tabs? Are there any spacers or aftermarket control arms?
@BETTALIFE101Күн бұрын
It’s useless. Factory is already cold air
@dangrbitchКүн бұрын
I’m digging that color. Thinking bout that for my matrix
@brandonknutson18712 күн бұрын
I was nervous driving with my velossa tech in the rain but this being lower would worry me more. Not to mention that the bottom part is just directing air only when moving. If stuck in traffic you are sucking in the hot engine air
@darylcunanan89722 күн бұрын
what is the spoiler
@boost3313 күн бұрын
The only way to "ram air" into a naturally aspirated engine is to, make it no longer naturally aspirated. You can supple cooler air, but you cant actually force any additinal air volume into the engine. The NA engine will draw in whatever air it can based on atmospheric pressure and thats all you get.
@ninchalla_createsКүн бұрын
ram air intakes are designed to use the car's speed to increase static pressure. So typical designs use a scoop with a wide opening that tapers into the intake manifold. But yea you're still better off just going force induction at that point cause how much more air are you really getting in there. I do think the FA24 can make decent use of a ram intakes due to being a high compression motor though
@boost331Күн бұрын
@@ninchalla_creates Thats the marketing talking. As soon as that air hits the filter it gets slowed right back down. Its a giant obstruction directly in its path, no matter how free flowing it claims to be. At that point you will get whatever volume of air the engine is capable of taking in. Thats it. There is no additional volume of air making its way into the cylinders at any point. Drawing the cooler air in from down below may be of some benefit though.
@grippgoat3 күн бұрын
Seems kinda pointless. You barely show the parts, which are pre-prod 3D prints, fast forward through the install so fast we can't even tell how it all goes together and what the install entails, and most importantly, zero objective data evaluating the performance. I guess you're just trying to build hype for an upcoming product, but if what you have is still a 3d print, that seems too soon, too.
@roriquevernonii84393 күн бұрын
This is what I've been looking for. I may not have to fab a setup, now!
@ProstoChester4 күн бұрын
What i see is that it picks up some cold air from the bottom than heats it up running after two super hot radiators wich are giving all their heat to an upcoming air flow which flies directly to this air duct system and heats it than puts a well heated air in you intake, making all this enginiring worthless...Magical design flaw. Correct me if im wrong.
@jamie101010Күн бұрын
Agreed, though I’m not even sure those ramps are doing much to redirect airflow. Question if there is any ‘ram’ effect at all. Let’s not forget the stock intake is incredibly well optimised, and will be very hard to beat.
@Rad1oD3mon4 күн бұрын
That's actually a really cool concept/idea. IF/when I get an 86, I'm definitely going to be picking up all these parts. I wonder if they'll make something like this for the 2015-20 WRX? Velossatech makes one (which I have) but it's an interesting and temperamental design that could be improved.
@dw80394 күн бұрын
very interested to see the numbers and all that once it’s completed
@Yepmyaccount4 күн бұрын
probably going to be the same as every other gr86 taking off the charcoal filter. the results from doing that seem to be anywhere from 5-8hp, and you get that with pretty much any intake, or, again just by removing the charcoal filter. It's very placebo as far as actually feeling the performance.
@causry4 күн бұрын
Is there a way to have the amber light on with the DRLs but then flash when turn signal is activated?
@chrome_hectic65054 күн бұрын
Would be good to record what it sounds like stock to get a better comparison. Nice upload 👍
@migueltaylor22644 күн бұрын
Rarely ever comment but man this was a solid install vid, def gonna be referencing it this weekend.
@throker4 күн бұрын
Note that you can't run this if you have an oil cooler installed; unless you want to cut a hole in your hood
@POGI_B10 күн бұрын
is the tomei dual exhaust 95 db compliant?
@zangovu11 күн бұрын
Would love a set.
@future_phonk12 күн бұрын
What diffuser is that?
@al3x1413 күн бұрын
Awesome videos as always been watching since, the first upload of the sec gens. What’s the wheel/tire specs of the yellow gramlights? And what camber numbers? If possible! Will like to see how I can start my setup soon!
@86Speed12 күн бұрын
We did a video a few back that will tell you the specs - We used Cusco upper ares to pull the entire suspension in to eliminate tire rub
@gonzalo430713 күн бұрын
What are those diffusser/addon pieces on the rear? they look great
@serujin553315 күн бұрын
could you cover it with the OEM motor cover? will it fit?
@pkcensors16 күн бұрын
People need to report this to NHTSA if this happens to them.
@4kstreamer4416 күн бұрын
scam
@jaxgarage630217 күн бұрын
Love mine! very comfortable, but can be stiff if needed!
@Issa_STI18 күн бұрын
Do they all come with adjustable camber top hats in the front?
@jaxgarage630217 күн бұрын
Yes!
@86Speed12 күн бұрын
BRZ and GR86 for sure
@Sybridox18 күн бұрын
Love this suspension! I somehow overlooked the front end-links that came with it and tossed them in the trash lol. I have cusco end-links on order through you guys so I guess I get more blue parts underneath.
@86Speed18 күн бұрын
Ahh Man sorry to hear about that
@kalanisong18 күн бұрын
i have this on my 86 :)
@That_8618 күн бұрын
sweet video i think im going with this exact setup. later on may go flex fuel e85 with fuel pump and injectors
@Nochillcharles18 күн бұрын
I might be the only guy that has the f1 blinking module for the 3rd brake light, and have the 4th brake light on blinking mode as well.
@artblackwood793618 күн бұрын
Thanks for making this video. I have the "S" version on my BRZ and they are very good. Not harsh at all with excellent dampening. Spring rate is up from stock and is just confidence inspiring.
@milesfathi19 күн бұрын
That supra in the background 🔥
@Speedindustry19 күн бұрын
:)
@miguelm367620 күн бұрын
Did you said affordable??? @$1,971 dls It’s a rip off when you can buy a different type for all 4.
@ronnieboucherthecrystalcraftsm20 күн бұрын
500 HP = harrop supercharger !
@ronnieboucherthecrystalcraftsm20 күн бұрын
have a look at = HARROP super charger for GR86 = much better than sprintex = compleye bolt on manifold with supercharger built into the casting ! subaru forever - for me !
@Playboyer67020 күн бұрын
Love this kit! Thanks so much guys at 86Speed!🤙🔥👊
@86Speed19 күн бұрын
Glad you are enjoying it - Thanks for letting us document with your GR86
@steveferguson10021 күн бұрын
Put a real gasket on the engine/pan and do it right.
@boost33121 күн бұрын
The sound is great, but 15psi to make the same power as a centrifugal blower makes at 7psi just aint worth it. So much more abuse on the engine just to make mediocre power.
@Brokenandsilencedrec24 күн бұрын
With the high compression the 2.4 has, what is the fuel requirement for this kit? What fuel are the dyno tests done on?
@86Speed21 күн бұрын
This car is on 91 - AKA Shit AZ. NV and Cali Fuel. On our Car we have A Flex Fuel kit that allows you fun E85 when you want.
@0ri19 күн бұрын
@@86SpeedI heard 91 hurts the car pretty bad is that not true? I’ve been running 93 this whole time
@Chris-pu6je15 күн бұрын
@@0rinot every place is fortunate enough to have 93, friend
@RudolphMendez24 күн бұрын
by any chance do you know when the stx supercharger comes out?
@teddyg593624 күн бұрын
I emailed sprintex back in 2022 about this. glad to see it is out. def on my mod list.
@codymills255624 күн бұрын
Does that packet have a part number? I purchased a used duckbill and would really like the template to do the installation correct.
@dirtysp00ns24 күн бұрын
Any thoughts on how this will compare to the Harrop kit in terms of price, performance, quality, etc?
@Playboyer67024 күн бұрын
I love this kit! Well worth the wait.
@86Speed19 күн бұрын
😄😁😄
@jose_the_great-jtg244125 күн бұрын
Looking to grab one for my 24' GR86... Hopefully they are in stock again
@86Speed24 күн бұрын
More are coming :) We just sold another one today. Contact our inside sales team and they can assist ya
@nickjacobsss25 күн бұрын
Really sucks titan 7 dropped the 18x8.5 spec as shown here. Functionally anything wider than that is just killing performance