@@skylane1828 yes

Me personally, I would think large would be fine but not knowing exactly what you have going on.I would really reach out to Rico.And explain to him what you've got.He's really nice guy and he knows what he's talking about.

@@Jeremyfishingoregon how much did it cost?

@Jeremyfishingoregon I'm also wondering if you flipped it over do you think you could flip it back upright? Thank you

@@TexasSlamFishing right around $1300

@@TexasSlamFishing yes you can still flip it back up right. They have some videos on the website showing it.

@CherieFord wow sorry that happened to you. Processing crab is hard work and a lot of effort. Thanks for watching and commenting!!!

Yeah I've been meaning to change some stuff.

@@Jeremyfishingoregon you still own yours.

No I just got rid of it.

O dang that's not fun.

@@Jeremyfishingoregon just money 191 hours. fun but spendy.

@ashcreekautoglass8812 thanks I learned alot from watching the video.

@@Dr-wheel-barrow-opperator thanks for your support 🙏

Thank you

Yep I did

Read the description!

I've only crossed Netarts once. I'd say it's difficult in the fact the channel can change. It's also a long bar. I would suggest going with someone that knows the area. If you've got Facebook join the PNW Jet Ski group. Alot of the members go out of Netarts.

I've crossed Garibaldi once with one other Jetski, and it was super calm. ;) ok, I will check out the jetski group. Thanks for responding to my q's. Happy fishing! Thanks. MPL

@minhply yeah no problem. FISH ON!!!

If you get a chance, do it! I have canned tuna for days. 😆

@@Jeremyfishingoregon ya I’d like to smoke, vacuum seal and freeze it. Would be nice to stock up. I view it similarly to hunting. Financially it hasn’t been in the cards unfortunately. Checking in on prices this year and I see they went up considerably too. 😔🤷‍♂️

I hear you 100%. I haven't even made it out this year.

That's awesome. They are good rods!

Great rods for sure. Ugly sticks get way over looked.

Next year I'll make a video of going out on the jetski.

Hopefully I’m in that video😂

It is definitely a must do for Fisherman. Thanks for watching.

That was a nice fish. You did good. You get a jet ski yet?

Salmon river

Thanks for watching.

Thanks for watching

Lol 😆 🤣 it's coming. I just got my ski all geared up.

Thanks

😆

I am pretty sure I used these one's. www.amazon.com/X-Haibei-Marine-Fishing-Holders-Stainless/dp/B013ANV764/ref=asc_df_B013ANV764?tag=bngsmtphsnus-20&linkCode=df0&hvadid=80470624968361&hvnetw=s&hvqmt=e&hvbmt=be&hvdev=m&hvlocint=&hvlocphy=&hvtargid=pla-4584070153351553&psc=1

I also added a cap to mine so it wasn't gaping hole.

That was a fun day, for sure! Thanks for watching.

Yeah, space, and I would need a bigger truck for a boat is my reasons. The only things that I notice is not being able to walk around, and being restricted by size. They close the bars or restricted them by boat size. The jet ski can handle alot rougher water than alot of boats can. I've fished tuna and salmon and bottom fish on a ski and love it.

@@Jeremyfishingoregon how you install a downrigger? i would need electric

@rja62b I am not sure I haven't done that one yet. But there are several guys that have. Join the PNW Jet Ski Fishing group on Facebook. There are a couple of posts on this.

Thanks

I don't know yet? The fishpro is a lot more stable than the fx and vx so far? But I may?

I've changed my mind. I will probably be adding them shortly. 😂😂

@@Jeremyfishingoregon I have two, 2009 Yamaha VX Deluxes, and I put the JetSki Collars on one of them just to see how I like them. I like the purpose of the Collars, and they do add a lot of flotation capacity, but they affect the skis performance more than I thought they would. They sit low enough on the ski that the back 1/3 of the collar is skimming the waters surface. On my ski, this caused me to lose about 4 MPH on top-end and hurt my fuel economy by about 10 miles per tank full. Given I am 7 miles from my neighborhood boat ramp to the pass to the Gulf of Mexico, then I run 15 to 20 miles offshore to my fishing spots, that’s a big deal since I am not configured to carry extra fuel at this time. I was 15+ miles offshore last year when an unexpected windy front quickly blew up. I was in 3-4 footers in no time. I started heading back in and it was so rough, I could not get up on plane. I was on/off the throttle a plowing max water, burning max fuel. I made it back thru the pass a my fuel warning buzzer started talking to me when I was still 5 miles from the boat ramp. A friend was on my other ski, which does not have the Collars on it, and he still had 5-6 gallons more than I did. Normally the skis burn fuel to within a gallon of each other, depending on how we ride. The 2009 skis are not configured good to try and add fuel on the water. The fuel fill port is low on the ski, just above the rub rail. If I keep using the skis for offshore fishing, I will upgrade to newer skis that are more stable than these and not go with the Collars. I will also add a rack system like “ Jet Ski Brian” did on his…he has figured out a very nice setup;-). I think Brian is up around the Virginia/Maryland area? Good luck with your SeaDoo…I’ll keep tabs on your videos;-)

Get on PNW Jet Ski group on Facebook. That's where alot of info and posting of times when groups are heading out.

Lol just brought it home yesterday.

2022

nice I bought a 2021

@joeb9135 nice, how do you like yours?

love it. covered Willamette portland to salem all but the falls

That's awesome. No offshore yet?

Nope, that's on a charter.

Lol

They are capped off, so no water gets in the hull. There is literally no other way to install them on a ski.

@@Jeremyfishingoregon all if the rod holders I see are mounted by sliding under the back seat screws then screwed back on, same in the side, and if any drilling, it’s just those 3 little holes, mounted on exterior. If that’s not the case with yours it’s a stupid design for a vessel. Again, not giving you a hard time it just doesn’t make sense. My other channel is a wave runner channel too and that’s a Bitchen rig

@kineticenergy1085 they've worked great out trolling for tuna fish and salmon. And I've never regretted installing them, and matter of fact, I would do it again. Thanks for watching

Yes last Saturday the 18th

Thanks

Just the standard not the xl.

@@Jeremyfishingoregon I see they have medium large and xl. So you have the medium? Can you stand on the side and not tip? I also live in Oregon and am setting my ski up for the ocean. Thank you.

I have the large. Yes I could stand on one side easily.

Sea bass

In oregon Dungeness have to be 5 & 3/4 inches. Thanks for your input!

Thanks man!

Yes, not to bad. Just depends on wind and currents.

Yes, not to bad. Just depends on wind and currents.

@@Jeremyfishingoregon I’m thinking of moving to Oregon where I live it’s very convenient to jet ski wanted to see good spots in your state awesome channel bro

They call it "the pile" out of newport and about 220ft to 250ft.

Hey thanks for watching and it should work fine. Here's link for the video with all the information on ordering the transducer plate. His KZbin channel is snowismas. kzbin.info/www/bejne/i2aZiph7ec5jgas