Where can I buy the tool to remove the impeller?

how long do I wait to patch area after acid wash?

Hello, I will be repainting my inground cemented pool soon but before I do I need to patch some areas due to previous bad patching and pressure wash to remove the loose paint. Do you recommend a certain pool patch material? And what type of muriatic acid did you use?

Is the paint from Lowes good?

There are cracks in my plaster (no leaks), but i have heard you should not acid wash if you have cracks

How would you remove an impeller that is stripped? The shaft turns but the impeller doesn't turn. I can hold the shaft under the capacitor with my thumb and grab the impeller and spin it. The impeller won't spin off the shaft, it just turns and turns.

It looks like these comedians patched together a video from the pool companies video! Very funny!

Thank you. Informative and easy to follow.

Do you need to remove the painters tape when you immediately finish painting the pool? Or remove it when it’s dry?

Just replaced the seal on my Hayward Ultra Pro. Your video was very helpful for the disassembly. My unit was a bit different when it came to the place where you hold the armature shaft when removing the impeller. There was a strange spring assembly and contacts over the screw. Once removed, I was amazed at how thin the impeller was. Mine was barely 1/4 inch! My pump is in pretty good condition so it came apart easy enough. No colourful language required LOL. Thanks for the help.

Thanks for your video. Learned heaps.

here after watching that car crashing into the cover and still holding it. LEMAO

U r the man. Literally, u make it look so easy. Sweet. Thanks 🙏 for your great videos

Thank you for the sharing your experience I am about to do that on my swimming pool. How many years the pair last? is that paint epoxy ?

How do you order??

Clearly that elephant doesn't want to do that"lay down on your cover" ! You're a low life using an animal to sell your product...it may be a very good product but you suck as a company !!That is consider animal testing asshole.

Is the acid put on straight or diluted

I’m going to try an ortho Waterhose spayer with the muratic acid

Great videos! Do u recommend acid washing prior to pound out and patching or can i do acid wash after patch repairs?

thanks u, you saved me thousands

Don't you have to reverse mortise or do something to give the plaster patch something to hold to? Like a cement drill bit, 1/2 inch deep at an angle or something

Do you dilute the acid for the wash? Do you use sida ash to neutralize the acid??

I noticed this video was made several years ago. Would you still recommend this brand of paint? Thanks so much

Thanks for this! My pump works great but occasionally the impeller will stop causing the pump to trip the breaker. Is there a bearing on the impeller or something that could be bad that’s causing it to bind intermittently? The impeller spins freely and seems smooth to me, no blockages or debris in the impeller housing.

Put the acid wash be after you sand it or took a sandblaster to the old plaster to get rid of the old paint that was underneath it I find a lot of these videos very informative but so far I haven't seen one that seems to like address everything

My lid won’t go on my basket because it is cracked. I need to replace it can I or do I have to buy the whole house in

How do I replace just a skimmer basket?

Any advice on what to do when the impeller which moves freely won't unscrew. I'm putting alot of leverage to unscrew and it just won't come off

Great Commercial..

Hi Dan, I have a gunite inground pool 40 years old. What product am I using to paint it. I was told Olympic Zeron Expoxy Pool Coating.

Nice 🎉🎉🎉🎉

Good information. Glad the water table was obviously low and the pool didn't pop out of the ground. Note: keep the plug out of the main drain to relieve any hydro-static pressure from the ground water table. Also, do this job during the months with the least amount of rainfall to help avoid catastrophic pool popping out of the ground. Run a sump pump full time if ground water continually enters through unplugged pool to complete the job. Pray everyday and if you can't stomach the risk and can afford to hire a pro with insurance against popping, do so, so you can sleep at night. ( I have had a pool pop -out of the ground in FL during a paint job. I foolishly hired a non pro (kind description) that plugged the drain before a two day rain deluge, the pool popped. $$$$$ ouch!!!

Nice close-up shots they're very helpful

Nice size. Easy to use and lightweight.

Prestige covers Suck. They are made with substandard materials. They fall apart within 1 half years.

This video is insufferable

What is the price?

How much was labor and material cost?

my friend as a chemist in my lab..you have to have long sleeves...so wrong

I wonder if you can help me. I have a Hayward matrix power flo 2 speed above ground pool pump and I need to change the switch. Here ia my problem. The back of the pump does not have that cover that comes right out with one screw. Mine has two holes in wich seem to have flat screws. But even if I unscrew these, the back does not pull out. I did not take the screws completely out not knowing if it is ok to do so. Can you help me in telling me exactly how to reach that switch. Thanks

I would have liked to have heard about the heat retention capabilities and if it seals….

This was a long time ago, but I hope he found a better use for that nice table.

I think mines is ceased

Love the 1970 porn music lol. Was the Dog ok looks like you might have sprayed him. Lol

Really appreciate your videos and instructions. I finished painting our pool last Thursday morning. Pool was able to cure for 2-1/2 days and then we got a little bit of rain. Shop vacuumed the bowl of the pool. The next three days we got more rain, not a huge amount, but enough to fill the bowl. We waited the three days until the rains stopped before vacuuming the bowl out again. Now the pool has been able to cure/dry for another three days. Is it safe to fill the pool tomorrow or do we need to wait longer? Please advise I would very much appreciate it or my family may mutiny!!! 😬😬😬

I have enjoyed watching your 3 part series on acid washing and cleaning and painting the pool. Quite a workout and eye opener

How long to wait before adding 2nd coat of pool paint mix? 4-6 days or just hours? Please advise

Hey guys thanks a lot I couldn’t have done this repair without your video. Fixing my old pump seal sure beats buying a new pump. Freeing the stuck impeller by removing the shaft and putting it in a vice worked. Brilliant!! Thanks again guys!!

i thought the fun was about to start when he included the shot glass lol

There are several points in this vid that are questionable. First..DO clean the entire pool. That includes s the bowl. DON'T leave debris in the bottom of the pool. The first part of the pool to acid wash should be the deepest part of the bowl. Wash it then dilute the acid with water such that you have 6 inches or so of water. This will ensure the bottom of the pool is properly washed and that run off from the sides does not eat away at the bottom. Make sure the sprayer you buy is ALL plastic. Muriatic acid will tear up all metals including stainless steel so DON'T wash the bezels of your pool lights with acid. Take them down and protect the light's and niches from acid during the washing. Make sure you can pump the water and acid that collects from this process into a place it is safe to do so. The acid will eat up concrete, rust metals and kill plants.