7 ай бұрын
10 ай бұрын
Пікірлер
@HondaGoldwingGL1800 7 күн бұрын
Why would you take some needle nose pliers to turn the piston in on the electric brake motor and just put the car in brake service mode which retracts the gear in the electronic motor? Then you can just push the piston back in. You did it the hard way.
@Arno_L 8 күн бұрын
Love the sound of the Go Devil😊
@garywheeler2055 9 күн бұрын
Followed your resto of the cab jeep. Great help doing my 43 resto. Great videos 🇨🇦🍻
@JimRamsey-p5x 9 күн бұрын
Good luck!!! Hope it still works!! I bought the same one in October of 2022. Put an hour meter on it, and have used it for 1.1 hours, and it threw a rod. 😢
@langdonkessans8689 10 күн бұрын
Why the hell you spray cleaner on old parts don't watch this clown lmao
@WahyuDolopo 13 күн бұрын
Im come from indonesian
@rebeccamelton591 13 күн бұрын
Just a suggestion, if you remove the fill level plug it will vent that way while refilling. Also you’ll know when it’s full and not waste expensive fluid. It’s faster filling and you won’t have fluid splashing back at you and all over the car. Or just back the funnel out a smidge so it can draw air from around the neck of the funnel.
@vettle1 11 күн бұрын
You should still drive it and then check because the fluid expands as it heats
@AirborneMediaScotland 15 күн бұрын
My 44 Willys mb had the rear fenders reshape by a chubby owner but your is a bit neater than mine ,it was cut and welded and reshaped with a large hammer ,I’m going to replace both of them with new ones. I’ve enjoyed your rebuild videos thanks from Scotland
@AlsGarageRestorations 15 күн бұрын
Greetings! Those rear fenders and driving position was certainly meant for smaller drivers when they were first produced. I can see why many made the adjustment. Good luck with your repairs!
@demedusaacademy 18 күн бұрын
Great video man
@juelzsantini 21 күн бұрын
Al did you have to disengage the brake system and the abs. my fusion is electronic braking system
@AlsGarageRestorations 15 күн бұрын
I might recommend disconnecting the battery, but I otherwise didn’t disconnect anything. I just made sure the master cylinder reservoir cap was off, which allowed for the fluid to got back into that area once the caliper piston is compressed.
@Daim770 22 күн бұрын
Fun and nice video. Thank you for covering this truck
@jamesbowler3654 26 күн бұрын
Air pressure to low on paint gun!
@kushkush7954 Ай бұрын
An all rounder.A willys man.👍👍👍👍👍👍👍👍👍👍👍👍
@carlosarias127 Ай бұрын
gracias
@TheJarrett444 Ай бұрын
Clean workspace. Simple, yet thorough explanation. I appreciate the time you took for this. Excellent job 👍 Sending you some nitrile gloves for Christmas!
@Hzq_ali Ай бұрын
Those waxes do not provide up to a year of protection. You can tell if the wax is actually still there when you wash the car. If the water is flat and not beading, then theres no more protection left on the car. DO NOT apply this once a year and forget about it. The turtle wax super hard shell wax is at max offers a couple of months of durability depending weather conditions and whether the car is parked inside or outside.
@robertyoung1506 Ай бұрын
Thank You, I really appreciate Thank You, I really like watching true restoration artist at work.
@mdomnis Ай бұрын
Thanks for the video! Who is the jerk that thought this leveling plug behind the wheel was a good idea instead of a dipstick? :)
@AlsGarageRestorations 15 күн бұрын
Good question! Not how I would’ve designed it.
@davidc9012 Ай бұрын
Un travaille remarquable, félicitation !!! Un magnifique petite Jeep comme on aime en voir, amitiés de France 😍😍🤩🤩😍😍🤩🤩😍😍🤩🤩
@analoufi Ай бұрын
It is sold to us for 37,000 thousand US dollars / 2023 f150 crew cab 4x4 XL V8 5.0
@camshaw5160 Ай бұрын
Excellent video! It helped me do this job myself so thank you for saving me 500 bucks!
@AlsGarageRestorations 15 күн бұрын
Glad to help!
@rsz90182 Ай бұрын
Neat looking historic Jeep. Nice to take friends out on a trip and talk about it.
@paulmcmain1760 Ай бұрын
Very nice
@mohyminislam1859 Ай бұрын
How many QT of oil you put on your transmission in total?
@vrosi1963 Ай бұрын
Is the green filler you use bondo , i need to do the dame to my 32 mb
@INTERNA9 Ай бұрын
Thanx
@FayazAhmad-yl6sp Ай бұрын
Fantasticwork, i have M38A1C 1962 model.
@Ka9radio_Mobile9 Ай бұрын
Made In USA!😀
@gregoryaparker Ай бұрын
Excellent video! I'm watching it on June 6th from Germany of all places :)
@jmsancho Ай бұрын
¡¡ Increíble!!,... ¡¡ fantástico !!.
@allnovieveryday Ай бұрын
According to the service manual it says to throw away the caliper bracket bolts and get new ones. Nobody seems to do it. Not sure why it says that.. also for fusion sport 2.7L models I'm told a 11mm hex socket is needed on the fronts.
@AlsGarageRestorations 15 күн бұрын
I didn’t replace caliper bolts and its ran fine, but I think they suggest it based on the stress these bolts are under and the tightness these have to be at. Multiple tightens through multiple jobs can potentially shear them off.
@murali5247 Ай бұрын
The USA should start making things like the Jeep wily ....?..
@malu_- Ай бұрын
Never thought I would see someone in a pink skirt working on a jeep, good deal man
@fergus41 Ай бұрын
What tool is that you're using to strip the paint?
@Lukos0036 Ай бұрын
The music is awful, otherwise good video.
@somalia5019 Ай бұрын
Thanks
@ajsaucy1603 Ай бұрын
Awesome video thank you and God bless
@user-lf1ki4ht7c Ай бұрын
Excellent Work.!
@JimGrady67 Ай бұрын
Great video!!! A lot of good information. I just did my brakes and my new front pads did not have any adhesive. I got a slight clunk noise a few times when I tested them I bet that the issue, the pad is loose.
@kevinconejo9361 3 күн бұрын
Mine don’t have adhesive either and there’s a weird noice when I break and it doesn’t break too good, what did you use to stick the pad to the caliper?
@rolandgrady557 Ай бұрын
Wrong intake manifold
@mattluszczak8095 Ай бұрын
...brah nice
@user-yn4bj5ul1s Ай бұрын
Thanks! Very informative and detailed.
@Janne1Hirmu Ай бұрын
Horrible music
@nicholas_landon781 2 ай бұрын
УАЗ по интереснее будет
@FredrikBru 2 ай бұрын
Hey! Its 70lb OR 94Nm, not 110lb :)
@antolinijeanfrancois7 2 ай бұрын
Bonjour, ça doit être rare avec un toit.
@AWDJRforYouTube 2 ай бұрын
Great job on that Willys Al! I have a Willys with alum artic cab like yours. The sliding windows are very rare!
@rb67mustang 2 ай бұрын
Great job, Al, on such a Historic and Iconic Willys MB. Yes, it's your Jeep, but I like it better without the roof it came with. I like your tasteful looking trailer hitch as well.
@rb67mustang 2 ай бұрын
Hey, Al, is the roof of this 43 Willys MB an original from WW-II???