How to 150cc GY6 Swap a 50cc Scooter
12:27
My Jump Pilot Interview Weekend!
2:38
2005 WRX JDM EJ207 Swap 3 Pulls
3:18
1999 miata knocking?
1:08
8 жыл бұрын
1999 miata timing check
0:58
8 жыл бұрын
1999 mazda miata timing issue?
3:05
8 жыл бұрын
Mega Bike Meet Atlanta - 2/28/16
0:12
1980 GS250T running on it's own
3:01
1980 Suzuki GS250T first start
0:42
9 жыл бұрын
Пікірлер
@andyusa5132
@andyusa5132 2 күн бұрын
Does it come with a charger and . Thanks
@MileHighDreamz
@MileHighDreamz 2 күн бұрын
@@andyusa5132 only the cable. You have to utilize a charging block you already have or another required outlet
@H-M-78
@H-M-78 3 күн бұрын
A buddy of mine wants help doing this . I've never worked on these vehicles. The brand is Znen and 2019 I think. I guess they are four-strokes?
@MileHighDreamz
@MileHighDreamz 3 күн бұрын
@@H-M-78 sounds like another Chinese brand, probably 4 stroke and they are all the same… an engine is still an engine.
@nukkuuu
@nukkuuu 6 күн бұрын
is there any aftermarket key ignition switches that could do the cdi/ground, i got one but it does it opposite way so the key locks in place when it its off
@MileHighDreamz
@MileHighDreamz 6 күн бұрын
@@nukkuuu I’m not sure I understand the question. They do the ignition cylinder/key combo and they also sell kits that come with everything (ignition cylinder, key, gas cap, seat lock etc) that you can buy and swap all of them out. This way the new key matches everything. Did you buy the correct ignition cylinder?
@Latooli
@Latooli 13 күн бұрын
So I was replacing my back tire and my dipstick broke off into the oil pan how would I get that out?
@MileHighDreamz
@MileHighDreamz 13 күн бұрын
@@Latooli is it metal? If so, use a mechanics magnet. If it’s plastic try to dump it out while pouring the oil out. If not then you drop the oil pan if it has one. If there is not pan then that’s a big headache because you will have to open the motor and I’d say send it as is
@mariagarcia3404
@mariagarcia3404 15 күн бұрын
I lost my charger, so what charger can I use to charge it the speaker
@ronaldkennethdalabajan1017
@ronaldkennethdalabajan1017 18 күн бұрын
Good evening sir.. i just wanted to ask if you encounter this kind of problem with your tailgater tough, it has power, and even connects with my phone, the problem is there is no sound coming out of the speaker though,
@MileHighDreamz
@MileHighDreamz 18 күн бұрын
@@ronaldkennethdalabajan1017 no I haven’t had that issue. Double check the volume on your phone or try to restart the phone. If it’s still not working then try to update the software on the speaker using the app
@nysa_605
@nysa_605 2 күн бұрын
Hello!! Yes my father is experiencing this issue as well! The buttons and everything works as well as pairing there’s just no sound whatsoever. I will try checking to see if there’s any software updates on the app. But if you find a solution please let me know!!
@MileHighDreamz
@MileHighDreamz Күн бұрын
@ I haven’t had the issue yet. Let me know if the update helps. Try to update or reinstall the app too
@stevendlent
@stevendlent 26 күн бұрын
Thanks for the follow up video! Yeah wish the radio station speaking would be faster too.
@MileHighDreamz
@MileHighDreamz 26 күн бұрын
@@stevendlent any time
@glennc.2183
@glennc.2183 Ай бұрын
I had the exact same issue in my 1999 S320 a few years ago and found the exact same problem. That sensor is the pollution sensor and the wire frays because it is run between plastic that will rub the sheath off the wire. I'm glad you recorded this so others will be able to figure this out. It's crazy that the immobilizer and climate control are on the same circuit.
@MileHighDreamz
@MileHighDreamz Ай бұрын
@@glennc.2183 nice (in a way) to see I’m not alone. Glad you found it!
@PhearaXT
@PhearaXT Ай бұрын
Can it play music from the USB flash drive?
@MileHighDreamz
@MileHighDreamz Ай бұрын
@@PhearaXT I haven’t tried but I can try when I’m back home on Christmas Eve. I still play all my cards music off the usb so that would be nice (copy paste to another usb)
@MileHighDreamz
@MileHighDreamz Ай бұрын
No, but I discovered a bunch of other useful features. Check out the video I made for you kzbin.info/www/bejne/bJ7dn4Jpf5aeY80
@stevendlent
@stevendlent Ай бұрын
Picked one up at Costco but haven't opened it up yet.... Have you updated the firmware by chance? Wondering if that might fix any of the slow FM radio changes? Doubtful, but crossing fingers because that was painfully slow and tedious to change one station.....
@MileHighDreamz
@MileHighDreamz Ай бұрын
@@stevendlent I have not looked into updating firmware, no. So far I’m enjoying the speaker however yes, if my primary source of listening was radio then I would get something else if you plan on listening to more than one channel. I’m leaving for the week but I can try when I return.
@MileHighDreamz
@MileHighDreamz Ай бұрын
Just made a video for you. Check it out kzbin.info/www/bejne/bJ7dn4Jpf5aeY80
@jfarr11
@jfarr11 Ай бұрын
Got my battery tray out tonight. Couldn’t have done it without this video-thank you so much. Also, can we talk about how crazy over-engineered this battery tray is?
@MileHighDreamz
@MileHighDreamz Ай бұрын
@@jfarr11 you’re welcome. 100 percent over-built but I’ll take it over the later. Too bad the bushings on the car aren’t as tough/reliable. My guess is so it stays secured during an accident or if you decide to join a rally race off-road lol
@Rebic-k5u
@Rebic-k5u 2 ай бұрын
Мариуполь в оккупации не могу найти подходящий размер и Китай по размеру не подошол 😢.
@MileHighDreamz
@MileHighDreamz 2 ай бұрын
@@Rebic-k5u please use google translate. I can’t copy your text so I don’t know if you are asking me something 🤷
@Rebic-k5u
@Rebic-k5u Ай бұрын
​@@MileHighDreamz ok Google. Thank you 👍 Mariupol Ukraine 🇺🇦
@MileHighDreamz
@MileHighDreamz Ай бұрын
@@Rebic-k5u I’m happy to answer a question if you have one?
@dziorkeeegaming2108
@dziorkeeegaming2108 2 ай бұрын
Hey, how did you level the engine and align the back wheel with the front one? 🤔
@MileHighDreamz
@MileHighDreamz 2 ай бұрын
@@dziorkeeegaming2108 use two pieces of angle iron or some 2x4 wood
@dziorkeeegaming2108
@dziorkeeegaming2108 2 ай бұрын
@MileHighDreamz thanks!
@MileHighDreamz
@MileHighDreamz 2 ай бұрын
@ you’re welcome. To clarify, you can use them to squeeze/align the two wheels so they are straight. Place a block or lift under the motor/frame to set it at the correct height you want and then tack weld it before you do full welds so you don’t warp it from the heat
@dziorkeeegaming2108
@dziorkeeegaming2108 2 ай бұрын
​@@MileHighDreamz hey me again, how did you fit the r12 wheel? Mine don't fit😢
@MileHighDreamz
@MileHighDreamz 2 ай бұрын
@ the spline doesn’t fit or it’s not wide enough? My splines fit but I had to make that spacer I showed in the video
@ashtonstowe3450
@ashtonstowe3450 2 ай бұрын
Yo thank you so much bro my E420 was having the same issue on cold start. Ended changing the fuel filter n MAF sensor no luck but stumbled on dis vid 👍🏿
@MileHighDreamz
@MileHighDreamz 2 ай бұрын
@@ashtonstowe3450 glad to help out bro
@NB_Whoops
@NB_Whoops 2 ай бұрын
Is it possible to connect the starter motor from the 150cc? My new motor only has one wire from the starter motor and the old one has two.
@MileHighDreamz
@MileHighDreamz 2 ай бұрын
@@NB_Whoops a motor is a motor so it need positive and ground. If I had to guess the new one is ground off to the engine and the one wire is the positive. If so then my guess is ground off the motor/frame and it should work if you wire it correctly. Just verify the amperage isn’t going to blow your system if it’s bigger
@Donbscooters757
@Donbscooters757 3 ай бұрын
I want a bit taller tired compared to a 3.5 10
@MileHighDreamz
@MileHighDreamz 2 ай бұрын
@@Donbscooters757 this is the only experience I have with the scooter sizes
@seanmayo206
@seanmayo206 3 ай бұрын
Black wire? DC power
@MileHighDreamz
@MileHighDreamz 3 ай бұрын
@@seanmayo206 are you asking or telling?
@bryanhesler5238
@bryanhesler5238 3 ай бұрын
what do you need to weld to the frame
@MileHighDreamz
@MileHighDreamz 3 ай бұрын
@@bryanhesler5238 I don’t understand the question. Tubular metal? I modified the existing engine mount and welded it on the top side between the left and right frame?
@Gibilanus
@Gibilanus 4 ай бұрын
I bought some second hand junk, deformed the bolt a bit because I didnt have the right tool. Then got the right tool but it was already too fucked. No mf idea how to open it
@MileHighDreamz
@MileHighDreamz 4 ай бұрын
@@Gibilanus can you use a small grinder tool to cut a slot in the head of the bolt then use a flat head?
@Jdottsleazyy
@Jdottsleazyy 4 ай бұрын
I have a buddy and the wire colors on mines are different the colors are red/white, orange, blue and black. How should I wire it?
@MileHighDreamz
@MileHighDreamz 4 ай бұрын
@@Jdottsleazyy I would try to google search a wiring diagram or probe to find which wire does what and go from there. I don’t know which is which. Try googling the colors to see what they stand for.
@DanielGish-v1x
@DanielGish-v1x 4 ай бұрын
I tried all that and it still ain't got no way to start it are they gone I'm getting juice to all the places and everything's checking good but it still ain't got no power or lights
@MileHighDreamz
@MileHighDreamz 4 ай бұрын
@@DanielGish-v1x I’m not sure if this is your first comment or a reply to a previous one (use the reply option if so) but if you’re saying you probed everything and it’s working then idk why it’s not. Are you using the key or just connecting wires? Maybe the ignition is bad if you’re using a key? Maybe a relay somewhere that isn’t working?
@Foxnhell
@Foxnhell 4 ай бұрын
I appreciate you bro. My question is regarding the rear wheel as I haven't decided if I use the 150cc wheel or the 50cc wheel. Did you have to change the gearing? The 150cc is designed for the greater diameter so how does it run with the smaller wheel? Thanks!
@MileHighDreamz
@MileHighDreamz 4 ай бұрын
@@Foxnhell I did not change the gearing… I had to make a spacer for the wheel and another for the nut, you can see it in my build video. If you don’t want to do this then buy the short output shaft and swap it out to keep the original 50cc wheel. It drove nice, a lot of torque and acceleration but top speed limited somewhere around 55-60mph. If you put the 150 cc wheel it will be a better fit and you will sacrifice a little torque but have a higher top speed. My understanding is that you can adjust the clutch or drive unit with aftermarket parts to get the ride style you want so I guess either can be adjusted. Hope that helps!
@ПольПогба-ж1ъ
@ПольПогба-ж1ъ 4 ай бұрын
Спасибо тебе добрый человек
@MileHighDreamz
@MileHighDreamz 4 ай бұрын
@@ПольПогба-ж1ъ can you use google translate and post in English? My phone won’t let me copy paste your comment so I don’t know what you are saying/asking.
@shoemaniac100
@shoemaniac100 5 ай бұрын
I’m so confused. What did you actually do that keeps the antenna extended? It just looks like you took it apart and then put it back together without changing anything.
@MileHighDreamz
@MileHighDreamz 5 ай бұрын
@@shoemaniac100 my motor was burned out, so the motor never turned on to wind the antenna up or down. I took it apart, manually extended the antenna, and then put it back together with the antenna extended. This way the antenna is extended and usable. Only thing to note is it will always stay up with the radio on or off.
@Vegeta-pp4vm
@Vegeta-pp4vm 5 ай бұрын
What a waste 😔f time
@MileHighDreamz
@MileHighDreamz 5 ай бұрын
@@Vegeta-pp4vm solution is in a follow up comment. Actuator needed to be replaced. No need to comment negative on a decade old video. I didn’t have access to editing and this was a video to send to a friend for help.
@METALMAN4Wii
@METALMAN4Wii 5 ай бұрын
My place charged me $125 and I bought my own oil and filter and then 3 days later it went back in to have sand removed from the carburetor that was $375. counting the new battery I bought from Walmart for around $120. yeah even though its a cheap Chinese scooter it need a bigger motorcycle battery so im at $620. but it will pay off got a job interview at Jersey Mike's 8 miles away tomorrow after I just quit Jimmy John's Last week.
@MileHighDreamz
@MileHighDreamz 5 ай бұрын
@@METALMAN4Wii oh man that’s a bummer. Sorry to hear they charged so much. I hope this video helps you save money in the future. Also know that the carburetors are cheap (10-20 dollars) and relatively easy to install and tune. A bunch of videos online for it. Best of luck with the new job
@METALMAN4Wii
@METALMAN4Wii 5 ай бұрын
@@MileHighDreamz Yeah you wanna hear a miracle as soon as I said I will just walk it home a mile I can't afford more than $375 they got it started 5 minutes later.
@wastelandgarage7837
@wastelandgarage7837 3 ай бұрын
Yea that place you went to are a bunch of scammers, I literally have the same scooter and just did a complete once over for 400 bucks, that's literally everything in the moped brand new!
@METALMAN4Wii
@METALMAN4Wii 3 ай бұрын
@@wastelandgarage7837 Yeah it's was $750 on Amazon Xpro Maui plus $500 shipping I also went back to Jimmy John's but one 7 miles from my house that's 5x busier.
@appleuser7114
@appleuser7114 5 ай бұрын
Ive a 1995 w140 s-class I hope you reply to this message, I’m having a radio wire issue everything is connected correctly, like wire to wire, for some reason, my radio doesn’t come on when I turn the key to the second on position or when I turn the car on, what could be the reason for that? My red accessory wire / yellow power wire, turns the deck on when I connect them all together, which leaves the deck on even if I take the key out the ignition n it drains my battery if I let it sit overnight. every wire is coded correctly, color to color. I purchased a brand new (AMP) recently. so I hear the (AMP) turn on when I connect the (blue) wire to the (yellow) power wire, just to make sure the AMP turns on, which it does. I get no power from the deck system what so ever, when all the power wires are connected correctly. the radio (fuse) is fine. I’ve no blown fuses from the trunk at all. If you can reply back, that would be awesome!.
@MileHighDreamz
@MileHighDreamz 5 ай бұрын
@@appleuser7114 check the fuses under the hood as well. If all is well then check the voltage to the yellow wire with the key off (radio unplugged) and see if it has power. The red one should be dead. Now turn the key on and check if the red is powered up. If it is then your head unit should power on so try a different radio or see if the original radio will power up. If either is missing power then you have a power supply issue. I’m pretty sure there is one under the hood on the drivers side
@appleuser7114
@appleuser7114 5 ай бұрын
@@MileHighDreamz thanks for replying back 🤙 I’ll go try that n I’ll get back to you. Thanks again.
@shaunaromine3709
@shaunaromine3709 5 ай бұрын
When working with all your wires up front, there is a key that has green and orange (?) Or yellow wires that are just hanging there, not plugged into anything. Its behind all the wires you are working with. I have that too. What do I do with that?
@MileHighDreamz
@MileHighDreamz 5 ай бұрын
@@shaunaromine3709 I’m not sure which it is, this project was a while ago but if mine isn’t plugged in you should be good??? Sorry I couldn’t help
@gibocarrillo3675
@gibocarrillo3675 6 ай бұрын
Hello thanks for the video. Ive seen another comparison video on youtube where the 90/90 10 size was a bit smaller in height.
@MileHighDreamz
@MileHighDreamz 5 ай бұрын
@@gibocarrillo3675 you’re welcome. I’m just sharing my experience and presenting it as simply as possible. I hope it helps you make a decision. Again, when it comes to tires I like to stay with brand name because I don’t take risks with my life in the tire category to save. A little money. The times I did I ended up getting hurt. I would recommend the brand name.
@gibocarrillo3675
@gibocarrillo3675 5 ай бұрын
Planning to buy michelin s1 or city grip. Just haven’t decided on the size yet. Thank you
@ThePrinceOfTheTalkbox
@ThePrinceOfTheTalkbox 6 ай бұрын
Sooo we Gonna act like we didn't didn't see POLISHED NAILS on.this guy?
@MileHighDreamz
@MileHighDreamz 6 ай бұрын
@@ThePrinceOfTheTalkbox lmao! It was a date night with my girl during COVID back when I used to be a white water raft guide. We would paint our nails (normally clear) so they don’t get soft and fall off from being wet all day. I let her pick the color this time and we both matched.
@BruceCook-v3j
@BruceCook-v3j 6 ай бұрын
fuses are good and battery is charged
@MileHighDreamz
@MileHighDreamz 6 ай бұрын
@@BruceCook-v3j I’m not sure. Check your cdi wiring. There isn’t much to the scooter, either so thing is shorted or open. Just follow the wires. Maybe even a ground
@BruceCook-v3j
@BruceCook-v3j 6 ай бұрын
fuses are good battery is charged
@BruceCook-v3j
@BruceCook-v3j 6 ай бұрын
ive got a 49.5cc schwinn sport scooter. i py passed the ingnition switch to start my scooter after ridding it . while i was ridding it it died and i have no power to the stater switch button and i have no lights or blinkers working
@MileHighDreamz
@MileHighDreamz 6 ай бұрын
@@BruceCook-v3j sounds like you shorted something out, blew a fuse, or your battery isn’t being charged. Check the fuse
@JacksonFikel
@JacksonFikel 6 ай бұрын
My 150 came with a 4 wire rectifier do I still need to change it
@MileHighDreamz
@MileHighDreamz 6 ай бұрын
@@JacksonFikel I’m not following your question. Mine came with the rectifier as well and I’m pretty sure that is what I had to wire into the old bike. So what are you asking? Are the old and new ones both 4 wire???
@KurruptedDataYouT
@KurruptedDataYouT 8 ай бұрын
Did you ever fix this? Was it the fuel pressure regulator?
@MileHighDreamz
@MileHighDreamz 8 ай бұрын
Yes. The aftermarket fuel pump I installed was making noise after some time so I switched back to the OEM but still had hard start issues when warm. I replaced the fuel pressure regulator (under the hood) and it starts right up every time. I would try that first
@CrucialSpeaks
@CrucialSpeaks 8 ай бұрын
WOW great job!
@MileHighDreamz
@MileHighDreamz 8 ай бұрын
Thank you Crucial
@davidmanley3290
@davidmanley3290 5 ай бұрын
​@@MileHighDreamz😂😂😂😂😂😂
@MileHighDreamz
@MileHighDreamz 5 ай бұрын
@@davidmanley3290 what’s so funny?
@sparklinglumens
@sparklinglumens 8 ай бұрын
Thank you, I’m gonna try in my sym allo 50, I lost the key
@MileHighDreamz
@MileHighDreamz 8 ай бұрын
Hope it works for you
@justdoit5921
@justdoit5921 8 ай бұрын
But I have a green 2 black red and yellow wire
@MileHighDreamz
@MileHighDreamz 8 ай бұрын
I would test and/or follow the wires to be sure. If you’re saying 5 total then I’m guessing red is switched positive, yellow is hot positive, green and black are for lights and ground but I’m not sure, it’s just a guess. I’m not liable if you mess up.
@Sigma123yhhji
@Sigma123yhhji 9 ай бұрын
Witch oil u using?
@MileHighDreamz
@MileHighDreamz 9 ай бұрын
I don’t recall, but if I had to guess it was probably Rotella T6 that I had left over from my car.
@sherazhussain8632
@sherazhussain8632 9 ай бұрын
How did you resolve the water going into your trunk?
@MileHighDreamz
@MileHighDreamz 9 ай бұрын
The drain holes were clogged up on the left and right sides. I used a bent wire to clear it from under the bracket.
@sauldean6430
@sauldean6430 9 ай бұрын
so what is powering your amp? I have a 95 model of this car and did exactly what you just did, everything comes on except the sound?
@MileHighDreamz
@MileHighDreamz 9 ай бұрын
The amount of I’m referring to is the original OEM amplifier in the trunk. It is powered by the same factory harness it is connected to in the trunk. The only thing we are changing is the signal that we send it. Double check that the signal wire (blue) is connected. If you are changing the radio because you had no sound before then maybe the issue is with your amplifier.
@sauldean6430
@sauldean6430 9 ай бұрын
@@MileHighDreamz thank you so much for responding, I will check that out
@sauljob2396
@sauljob2396 9 ай бұрын
Hi how are you? What did you do to all the black wires
@MileHighDreamz
@MileHighDreamz 9 ай бұрын
Which ones are you referring to?
@sauljob2396
@sauljob2396 9 ай бұрын
I just watch the video again, and realized you have already mentioned that those black wires will go as the negative, thank you so much. It works on mine, I just finished it, 95 c280
@MileHighDreamz
@MileHighDreamz 9 ай бұрын
@@sauljob2396 awesome glad to hear it helped out
@byteme402
@byteme402 10 ай бұрын
take your mirrors off and see if the wires are chafed thru thats what it was on mine
@MileHighDreamz
@MileHighDreamz 10 ай бұрын
Great addition! Thanks for the info
@urmaswu6203
@urmaswu6203 10 ай бұрын
Hi.I have w140 S320 96y and O² sensor wont work correctly, its ON few sec and then its shut down/OFF Do i need to replace O² sensor? No check engine light. There is many different sensors in the market, witch one i need do buy?
@MileHighDreamz
@MileHighDreamz 10 ай бұрын
Is the O2 sensor is on then shuts off, or the engine is on and then shuts off? I always use Original Equipment Supplier for O2 sensors. The aftermarket ones will give Mercedes problems. You don’t have to buy from Mercedes, just look up the brand and model number. For example, if it’s a Bosch brand, then you buy the same Bosch model expect it doesn’t say Mercedes. Check around for an intake leak and make sure you have fuel pressure and ignition
@urmaswu6203
@urmaswu6203 10 ай бұрын
@@MileHighDreamz At the inspection, mashine show that O² sensor turn off when engine running
@MileHighDreamz
@MileHighDreamz 10 ай бұрын
@@urmaswu6203 which sensor is it? Number one or two? If it’s number 2 (downstream) then it doesn’t affect your problem. If it’s number 1 (upstream) then change it and see
@urmaswu6203
@urmaswu6203 10 ай бұрын
@@MileHighDreamz There is only one sensor before calisator upstream
@MileHighDreamz
@MileHighDreamz 10 ай бұрын
@@urmaswu6203 if there is only one and it is upstream of the catalytic converter then I would change it and see
@Fawaz.aaaUSA
@Fawaz.aaaUSA Жыл бұрын
Many thanks for the information
@MileHighDreamz
@MileHighDreamz Жыл бұрын
You’re welcome
@fyegarage5901
@fyegarage5901 Жыл бұрын
Hey do you have the correct link to get the replacement ignition switch for this 4 wire set up
@MileHighDreamz
@MileHighDreamz Жыл бұрын
No I only used switches. Try searching for replacement key sets for 50cc scooters. If I recall they are $15 USD and come with new keys, ignition, seat lock and trunk lock. You can swap them all out and have the same key for all.
@GirlsNDragons
@GirlsNDragons Жыл бұрын
Just did this on a 99 Miata. You don’t have to remove the upper control arm. Just put pressure on the knuckle and tilt the strut, it will come out
@MileHighDreamz
@MileHighDreamz Жыл бұрын
If I recall correctly there are two reasons I removed it. 1 it becomes much easier to work with and, 2 it is less strain on the bushing. I miss working on this car… everything was so easy!
@richiepadgett8946
@richiepadgett8946 Жыл бұрын
Awesome information,thank you.
@MileHighDreamz
@MileHighDreamz Жыл бұрын
You're welcome
@SleepyDrink-dp9jv
@SleepyDrink-dp9jv Жыл бұрын
Thanks
@MileHighDreamz
@MileHighDreamz Жыл бұрын
You're welcome
@robertom1448
@robertom1448 Жыл бұрын
Thank you like im sure some or many have said you took the guess work out of the install. Well lit, speaking clearly and product information. any nice nail polish. Nailed it
@MileHighDreamz
@MileHighDreamz Жыл бұрын
Lmao the nail polish was a result of my GF at the time, but thanks for the compliments and I'm glad I could help!