Are you planning to update your webpage with email, contact information, or patreon?
@Yeaitts27 күн бұрын
Wouldn't the volume inside the box change while placing the woofer inside ?? Like it would decrease right?
@michaellarcomАй бұрын
Back in the day I put a pair of radio shack Mach 2 15 inch speakers in my car on a 70+70 Sherwood they sounded great
@RacerXGTOАй бұрын
Haha, same here man. Back in the day, bought some Radio Shack woofers and horn tweeters, put together this speaker box I loosely copied from a JBL live stage box, used it for my electric drums and DJ events. Not only did they sound good, but a few people asked if I could turn them down! Buddy and I did a comparo on his Peavy speakers, mine sounded "richer" with deeper bass wereas the Peavy's were too trebely. Yeah, there's always going to be somebody that will say, don't do it this way, or do it this way only, hey, just build a good box and good speakers will sound amazing.
@onesikm32 ай бұрын
My rear parcel shelf of my bmw m3 is similarly mounted into a frame just like these. It came on most 3 series models from year 92-99. It uses a 6x9 and a 2.75” wideband/tweeter which is also sealed off in its own compartment to avoid deflection of the tweeter just like yours there. They are great cars for audio systems. They come oem with a 3 way component but it does depend on where you are located since not every country got the full premium 10channel hifi or hk system 😊
@leonardocuellar13862 ай бұрын
Hermano, excelente trabajo, me gustó mucho el sistema bandpass.
@jezlucas38782 ай бұрын
Ive used home speakers in the housing just thiwn in the boot of a car and worked well
@standfortruth3244 ай бұрын
Good charasteristics
@Darieee5 ай бұрын
fantastic overview - thanks a lot for sharing your knowledge and please keep it up - people like you make this planet a much cooler place to live on ❤
@ECBRP6 ай бұрын
Good morning I have two skar audio vxf-12 d4 dual 4 rms 1500 watts going into a 2000 Honda CRV what’s the best box I can make for this that will quake please thank you
@eosare7 ай бұрын
peerles for sealed, hivi for large ported, dayton dcs for medium vented..
@Thomas..Anderson8 ай бұрын
Which software was used for evaluating different box configurations?
@BoarAudio8 ай бұрын
Hornresp
@themattprincebro10 ай бұрын
I have 5 inch sub ..what diameter for my sub?
@hibahprice688710 ай бұрын
I'm going to make home acoustics with two two-way speakers and one low-frequency section, would you recommend using Monacor speakers? Or are there better options?
@RyxmEQ10 ай бұрын
I'm trying to make a subwoofer box for the Wharfedale Topaz SW-15 but with no luck. The subwoofer driver model is D086H, and I'm trying to make a front slot port box.
@hibahprice688710 ай бұрын
0.23 Qts ???
@Zawiedek11 ай бұрын
You should probably attend a speech therapist.
@slob5041 Жыл бұрын
You sound like you're about to reveal and evil plan using the minions
@bagus_kalsel Жыл бұрын
Dimana beli nya om
@user-wb2sm8uv6d Жыл бұрын
RMS
@janibh Жыл бұрын
Wonderful and highly informative! Thank u. Can we use Seas H1602- L12RE/XFC as rear door spears ?! i am not certain wether its a car or home speaker !
@k.larsson1848 Жыл бұрын
Nice!
@jaypaskin2601 Жыл бұрын
I've made a couple of bookshelf speaker boxes from plasterboard they are great looking forward to salvaging more to start my next boxes aiming to make a cube out of a single sheet to cut down on visible seams
@rayproductionsbackupchanne3862 Жыл бұрын
hey man. not sure if you still reply to comments. but i got a ground zero gziw 12xspl-d2. it's a dual 2 ohm version. should essentially be the same. i want to be able to play the sub at low volume's with it reproducing atleast some realistic bass.. but somewhat SPL shake when i crank it up. would it be possible with your medium or big SQ size ported enclosures?
@BoarAudio Жыл бұрын
That new version has more excursion and lower Fs, if you have the space you can get really low digging and still SPL capable setup in bigger 70 litre box. 160cm2 55cm port, that puts tuning around 30hz and can play to 27hz in full 1000w. Port can be example 40cm tall and 4cm width slot port, note that for slot port length could be slightly different for same tuning than round port, but you can start around that 55cm length.
@rayproductionsbackupchanne3862 Жыл бұрын
@@BoarAudio ah not too bad! i'm not sure what volume i will have in the end. i went to a guy who did measurements and will make me a box tuned with WINISD and another program. not sure if it will quite reach the 70Litre mark but i feel like it would get close enough. what does 27 hz achieve though? my old 150 watt jbl HIFI sub used to be tuned to 27 hz and it was amazing. but i read online that the body thumping feeling lays more around the 30 to 45 hz. the box i am getting is going to be tuned between 35 and 40 hz. unless you'd recommend me to stick with the lower frequencies? i can easily get a big enough box in there but for this car i wanted to leave some space for groceries. and some space for showing the amps during shows :P thanks for the information though!
@BoarAudio Жыл бұрын
@@rayproductionsbackupchanne3862 Way you are doing it sounds good, because if you want to save some space raising the tuning little bit gives better results. For most music you don’t need anything under 35hz. That 70 l was only the air space port not included so the actual box size could easily be like 100 l. That sub is very versatile and will probably work great in the box you are getting.
@rayproductionsbackupchanne3862 Жыл бұрын
@@BoarAudio great to hear! cant wait indeed. GZ is a solid platform to start with
@MrObear Жыл бұрын
Great video!
@Somesh-Ji Жыл бұрын
I also through to use this same tang band speaker in the car door from 65hz to 300hz... how was your experience in this case.
@NYCybertruck Жыл бұрын
It would be so awesome to see a video from you exploring the differences between HomePod gen 1 and gen 2!
@bailey2517 Жыл бұрын
Very informative. This will help me design an enclosure for the party speaker im gonna be building this spring!
@rustycraig4458 Жыл бұрын
I would like to build an in home speaker enclosure for 2 alpine s-s65 6.5" speakers. They will be accompanied by an 8" subwoofer so I don't need much base from the 6.5" speakers. If I want to use them for mids and highs should I put them in an enclosure or just leave the back of the box open? If enclosed should I go sealed or vented? I wrote alpine to get the qts and vase numbers and still waiting for thise.
@tacede Жыл бұрын
Мораль в этой теме простая. Хочешь сделать домашнюю акустику 2.0 из автомобильных динамиков, покупайте только широкополосные динамики. Никакие другие тут не подойдут.
@ricassoquixote4268 Жыл бұрын
Does this woofer work for KRK 10 G4 speakers? To replace the woofer on it. The G4 are kevlar as well. Thank you
@BoarAudio Жыл бұрын
Maybe, but cone material doesn’t make huge difference. More important is to have same physical size for mounting etc. and electrical parameters if you can find or measure them on your KRK woofer, mainly impedance, Qts, Qes, Fs and Vas.
@ricassoquixote4268 Жыл бұрын
@@BoarAudio thank you, is there any good way to determine the exact woofer to buy for my krk 10s? like a website or something, I think i can only find the generation 3 and I have gen4. Thank you
@augustoadriano7756 Жыл бұрын
Finally passive radiators 😍😍😍
@jeszone Жыл бұрын
Good information but the video is deliberately shaky. I cant watch is longer than 5 mins.
@TPVPRO Жыл бұрын
Thanks for the video great info for a beginner like myself.
@alejozam Жыл бұрын
This is the final video 🙌🏼🙌🏼🙌🏼🥇
@headlymedia4148 Жыл бұрын
I have 10" woofer ( 120w ) , 6" middle (zipp) and a tweeter. I know the T/S parameters of woofer and middle speaker. What is the perfect measurement of 3 way cabinet and how can i calculate the appropriate volume of the cabinet ? Is there any equation or some thing ? Please help me .
@BoarAudio Жыл бұрын
Follow this tutorial: kzbin.info/www/bejne/bHqUknyff9yNbbs or download and use WinISD Put T/S parameters of your 10" sub in there and calculate different sealed and ported enclosure options. Calculate also how the midwoofer works in that same enclosure, if the result is bad, and you don’t want to have deep roll off HPF on your midwoofer then make sealed enclosure only for the mid inside the cabinet and make overall cabinet bigger.
@georgemartinezza Жыл бұрын
I have a Home Audio component Sony, (sony genezi) I want replace the OEM Sony speakers damaged with a new JBL or Cerwing Vega, amplifier is 4 Ohms, so is not hard to find speakers same impedance, then I imagine no problem with that, the RMS in the apmplifier are aprox 275W, - just I don't know if replace the tweeter or not, using so: JBL 6" with crossover + tweeter, or just the cone 8" . (00)?
@theresalong65732 жыл бұрын
just found this wow enjoyed info and ideas
@gronvall33642 жыл бұрын
Can you make a video about phase issues when choosing different slope on crossover
@len38162 жыл бұрын
How to calculate the size of the speaker cabinet, when there is no information about the speaker?
@PrinceWesterburg2 жыл бұрын
OMG, thank you for the MH-Audio mention, their site is soo much better than the rubbish out there! I'm designing for hifi using big 1970's professional studio monitor speakers that none has the specs for, they where rare.
@iSCOPEXZatec2 жыл бұрын
Rally english
@williamfraser2 жыл бұрын
Thanks for the information. Is it possible to calculate or estimate the TS parameters of an unknown driver? (Assuming you have the driver available to take any necessary measurements.)
@BoarAudio2 жыл бұрын
Yes, you can use DATS or REW with diy measuring "cables" to do impedance sweep and calculate T/S parameters.
@shams-ilarefin61042 жыл бұрын
Where are these speakers "Made in...." Also, the rubber is called Quick Edged and material of cone is H.O.P.
@BoarAudio2 жыл бұрын
Thanks for the information, and yes it says quick edge woofer on the speaker box. I don't know where these were made in, but the models of system that I used were Sony RXD5 and RXD7, if you want to find more information, or watch Audio Judgement video > kzbin.info/www/bejne/aIiXqGh9lN2fjK8
@shams-ilarefin61042 жыл бұрын
@@BoarAudio Yes i have seen this video before. I think he is a bit tough on the quality of SONY speakers. Although I was surprised by the super tweeter's simplicity. Makes me wonder why SONY put them in the first place if it barely makes any sound. Strange!
@MickeyMishra2 жыл бұрын
That is something I have not seen in a Video or even explained before as clearly as you did at 4:13 , where you mentioned the power limit with combination of the XMax of the driver. I never gave it a thought that you could do that with Software. I should have known better, but I have not had the need to build my own sub woofer box in a long time. Can I recommend something? It would be nice to put a PayPal Link so we can tip you for your videos. I get so much from watching other people's stuff and enjoy content like this. And use to buy DVD's about this stuff. It would be nice to tip the folks that make stuff I would like to see. Also, Thank you for making it easy to understand for the rest of us. I have to admit, I may never make another box again, but its fun to just play around with drivers. Again, Thanks Boar!
@BoarAudio2 жыл бұрын
Thanks a lot. I'm glad to know that people find something new and exciting on my videos. I will consider PayPal opportunity with some other changes that I'm now thinking. But hopefully I get to make more videos for you in a near future.
@anandshah712 жыл бұрын
@@BoarAudio Can you design subwoofer boxes for me cause I dont know how to use the winISD type software. I can pay by PayPal for service
@rabinpaul46382 жыл бұрын
Please give me a enclosure design for 5.5 inch 4 woofer and 3 inch 1 tweeter
@BoarAudio2 жыл бұрын
For good custom enclosure design, you need more detailed driver parameters, check> 4:44 To understand differences between drivers watch this video: kzbin.info/www/bejne/paiVhmSZYp6en80
@Shamsithaca2 жыл бұрын
how did the SONY speakers fare in the diagnosis before you changed it all out...its over 25 yrs old.
@BoarAudio2 жыл бұрын
Audio Judgement has a great video, where he measures these Sony speakers > kzbin.info/www/bejne/aIiXqGh9lN2fjK8
@Giuseppe.912 жыл бұрын
you two are related, right? kzbin.info/www/bejne/fJ2ppZKNaZtpaq8
@mackizzer23022 жыл бұрын
If I followed this shit I wouldn't have the best speaker is sf
@sancak0992 жыл бұрын
Souns like you talking finnish language more than english :)