Thanks - some great advice here and good job leaving those links too.

Thankyou for the video mate. My dewalt is doing the exact same and I was going to take it apart but I tried this and it works great now.👍

My loo has suddenly started filling in "pulses" after the flush. Any ideas?

See this video is 7 years old but really helped me, slow filling cistern and all KZbin videos were telling me to disconnect the water from under the cistern to clean a filter. Thought I’d try this first and bought 3x valves on Amazon for €5 and it fixed issue immediately! Amazing, thanks a million for making the video 👍🏻

Helped me do this job nice and easy cheers Limmy!

Brilliant video! Thank you!

Thank you so much!! Finally managed to fix the toilet which has been getting worse and worse the last six months. Feeling really chuffed that I both found the problem and the solution with your video. It was a bit fiddly getting those three stages together (partner finally managed that bit), but toilet now filling in seconds. And the rubber bit is still 2.50 on Amazon all these years later. 😊

Thank you Sir.

Very good video. You obviously know what you're doing, but it seems this threw even you a bit of a curve ball with the flickering issue. As a younger man I'd have given it a go...but these days I think I'd have to get a proper "sparky" in...

I don’t think I’m able to turn my water off from the toilet itself, I love in a flat would it work if I take the water off for the whole flat and replace?

I tried everything and get it out at all

Awesome tutorial! Thank you!

Hello I have the same mira go show with the video. The problem with mine is it randomly turns off during mid shower and it will come back again after few seconds. when it turns off all the light in the power is gone including the main switch can help me please what could be the problem?

I managed to fix my toilet thanks to you and this video you made (and the link provided to the part needed). I appreciate it, thank you very much.

The capacitor should run parallel with the L1 the flicker is coming from the fact that the switch is always running power through L1 even when it's off. the capacitor on L1 (only) is designed to minimize that electricity when the switch is off.

I'm still able to clean the filter but that is way to difficult for me. I'm 76 and on my own. Your video was great to watch . Fancy having a man like you around the house.

Great demonstration. Thanks.

I did this, it was split. So I paid £5.38 to get another and replaced it. Now I have a constantly running into the basin problem. Turning the water off the problem stops. So it is somehow connected with the part I just replaced. I unscrewed it and put it on again, trying to make sure everything was aligned. Lol, it was worse. Ahhhhhhhhh Grrrrrr.

Exact same issue with my toilet, fixed in 5 mins nice one 👍

Good video, now I know why my cistern is slow filling. I see you also have a bidet spray. I;m looking to fit one of these. Hard to dom and keep UK compliant. I'm fitting a couple of shower single check valves (ie same asma double check valve). Any comment please?

Thank you! You just saved me a lot of time! 😃

Job i might have to tackle so very handy vid. Should there be washer of some sort in metal connector

Didn’t really work for me,unfortunately . The top part wouldn’t unclip without first removing most of the bottom parts first.There was no way it was going to lift clear of the ‘white tube’ going into the solenoid,otherwise. Also there was still water in it,unlike yours,which didn’t help either. The bit about fishing out the ‘o’ ring came in useful though

Thank you so much, I found this extremely helpful 👍

Great work!

If I have replaced the part and the tank still isn’t filling up it’s just a slow drip still any idea what the issue may be?

Nice one. Thanks

Perfect video. Changed the washer last week , £4.99 ! …. A lot cheaper on Amazon ..

Thanks

Hello! Mine doesn't show the blue light when it's off , any idea why? thanks.

Thanks man - I hadn't got a scooby doo about this before watching your vid. First time my element blew on the old electric oven in my flat. I'll try getting the old element out later to see if I can find a serial no to get a replacement. Better that than fork out for a new oven when its 300-500 quid a pop. What a friggin rip off.

Thanks just repaired my makit the same way

this is great but good god man - PUT SOME GLOVES ON 🤢

It cost me £5 for the washer from my local Screwfix but I reckon I’ve saved at least £50 for a plumber. Thank you so much! 🙏

Brilliant video thanks. It fixed it too.

2nd time I had to do this with the same drill. Thanks.

Glad I found this video as been looking for this info. The problem I have is that when the cover and seat are up the seat part is not staying up just falls forward. Any suggestions how to fix?

Thank you.

Great video thanks. Any ideas why my shower trips out when on high but works fine on other settings please?

You mentioned the noise level, what db would you tap out on? I have noise sensitivities as I'm autistic but I also wear ANC ear bud almost all the time. Nice looking bit of kit. Thanks

Very good thank you.

Hi I have my pump out after a F05 fault no bits in it but when you try and spin the propeller of the pump it will not spin freely it ls like it has a resistance everytime you push it around then goes past it and around again to a little resistance and around again Is this Normal ! Thanks

Thanks

Do you know if it's possible to split the drum so you can change the bearings on this model? Becouse I dismantle mines and it looks like it's glued and heated.

This video was bang on. My cistern is now fixed for the princely sum of £ 3.71 (inc VAT). As you would say - "Thats us".

I’ve just watched your excellent video and it has saved getting a new machine, the waste pipe was well blocked, thank you once again.

Thank you for posting this video.reakky helpful

Thank you for this, looks really helpful 👍

Had the same problem and the part was broken so obviously I replaced it but now I can't get any water when flushing and the notch is definitely lined up I've checked 3 times any advice?

Hi, thank you for this video, I just fixed my Milwaukee M18 using your method, it's just superb and simple.