Thank you for your video. And especially for the close up of that washer which I am missing. My bike had catastrophic stator /rotor failure! Metal shavings everywhere. Copper bits too. And epoxy bits also. Did you do any more of a tear down to clean yours up? I think the PO must have rode with I pods in blasting because it looks like he rode it allot after it grenaded! In fact I’m guessing he jump started it numerous times after it wouldn’t start on its own. Any advice on cleaning the oil system or should I just tear it all the way down?
@roninMusa7 күн бұрын
Hello, guys I have been struggling a lot with this , when I go high rpm , suddenly the bikes stalls and the red light of rpm poops out and it shows me the maxim rpm without touch it , any suggestions in what could it be ? Much appreciated Thanks
@stephenlinton32628 күн бұрын
Just finished watching your series, congratulations to both of you
@angeloroustas7350Ай бұрын
Does anyone know why my F650GS was leaking oil from the upper part of the engine and my oil light came on. Once the bike cooled down the light came off and the oil stopped leaking!! Thanks
@TiereUndLandАй бұрын
real adventure bike
@tomhunt8558Ай бұрын
Katy I can't belive I'm only just seeing this. What an incredible jorney and you've made such a good film from it. Great work. Im gagging to go myself now.
@HaynesGarageАй бұрын
Thanks Tom. It was a long time ago now but I still have such fond memories of the trip. Hope you’re well?
@tomhunt8558Ай бұрын
@@HaynesGarage I can belive it. Do you think you'll ever do something similar again? I'm good thanks, been living in cyprus for the past year. The riding out here is endless, on and off road.
@HaynesGarageАй бұрын
I’d love to. It’ll be small family trips for a few years and then when the girls are big enough to go on the back hopefully we can do some longer European trips. I’d love to go and see my friends in Russia again. Sounds like you’ve had an exciting few years too. Did you move to Cyprus for work? Still doing the Downhill as well as motorcycling?
@tomhunt8558Ай бұрын
@@HaynesGarage haha fantastic. You'll have to get them those small electric bikes to get them into it early. Eek may find it hard to get into Russia for a while. Yea here with work, riding a little downhill yea but not near as much as i used to, loads of moto though. Drop me a watsapp if you still have my number
@howrrmr.71722 ай бұрын
Nice bike as you are and your husband is! Now ride happily and safely all the time!
@JamesMcCreadie712 ай бұрын
Wicked!! Look forward to seeing more vids
@bazm12 ай бұрын
Look fantastic Katy, Enjoy!!
@mikeonabike47912 ай бұрын
You the girl katy! Can’t wait to here more about the new bmw
@Blurredman2 ай бұрын
Good luck!
@marcstaddon71612 ай бұрын
Understandably a difficult and emotional decision Katy but it was time to close this chapter, and start writing the next one! Your videos and travel vlog have both helped and inspired me and I look forward to more in the future. Maybe check out the Yamaha T7, that's where I'm heading. All the best ❤
@HaynesGarage2 ай бұрын
Thanks so much Marc. I feel good about letting Monster go, definitely time to write the next chapter. I enjoy keeping the KZbin channel going so hopefully I’ll be able to find some time amongst juggling babies to add the occasional video. It’s lovely to hear you’ve been inspired. Good luck with the T7 search.
@JamesMcCreadie712 ай бұрын
Great you got it sold! I don't know how it couldn't be interesting regardless of what you get. I really dig the new F900GS but don't have £12000 spare. Anyway, I look forward to see what you decided on and a bike's a bike so all good. FYI, I traded my F650 ST just couldn't get it to run my way, it probably was running as it should be but was never happy, maybe a little underpowered for a 120 kilo 18 and half stone bloke.
@HaynesGarage2 ай бұрын
Thank you. I’ve been looking at the 700GS a bit lately but I’m wondering whether to try something a bit different. It can be quite shocking looking at the price tag of some bikes can’t it. What did you get in the end? Or are you saving for the F900?
@JamesMcCreadie712 ай бұрын
@@HaynesGarage I didn't want anything too big and heavy so thought about middleweights but still ADV, like transalps, tigers, africa twins or Tenere's. Ended up trading for a 700 Transalp, which came to me very unloved, from a trader, he's ignoring me so am taking him to court for the repairs but don't want to dwell on negative things or subject you to them, who needs that. I'll try my best to get my money back, if not it'll be a nice bike when it's done regardless. I'm enjoying it but has a broken rear wheel and under strict instructions from the engineer that did a temp repair, to only use it for work and back so not even had any jaunts yet. Thoughts have crossed my mind, because I don't like interest, I know sometimes it's unavoidable, I may try to trade up. A base model is £12000, which is not really that far out of reach, I have 0% credit cards if need be. I'll see. Just wanted something modern and sorted and I really like the look of these bikes, nothing odd from BMW for a change, just a motorbike with all the stuff in the right places, chain on the left of the bike, nice silencer, high level, nothing odd, no odd suspension set up. Totally floats my boat. I know nothing about the 700GS and yes I agree with the prices, especially Triumphs, they really hold their prices. A guy at work bought a 1200 explorer or similar, beautiful big dude, too big for me but the little sis, the 800 would be fine for me. Not sure yet. Just looking forward to my new wheel rim and spokes arriving so I can get the rear wheel relaced and new tyres so I'll be safe to go rip it up somewhere, going stir crazy. All about the pennies, anyway I look forward to seeing your new hoss in the stable.
@howrrmr.71722 ай бұрын
Life goes on with new monster. Godspeed!
@HaynesGarage2 ай бұрын
Indeed it will. Thank you for all your help over the years. I’m very fortunate to have such supportive and knowledgable subscribers like yourself.
@waltezprivat17582 ай бұрын
Thanks and best regards from Austria Walter!!👌👍👍👍
@HaynesGarage2 ай бұрын
Thanks Austria Walter 😀
@williamwilliam56622 ай бұрын
Pero vas a seguir con tu canal?
@HaynesGarage2 ай бұрын
I hope to, but things will be slow whilst I manage with two babies 😂
@Talematros2 ай бұрын
Thank you for your helpful videos all these years!
@HaynesGarage2 ай бұрын
Thank you. I’m glad you’ve found them useful. I’ve enjoyed making them. :)
@barrymiller37182 ай бұрын
Sadly an end of an era but the start of a new one, Good luck in all you do Katy.
@HaynesGarage2 ай бұрын
Thank you Barry :)
@kirkbrandham2 ай бұрын
Very sad to see Monster go. But the time was right. She has been amazing, she took you round the world and looked after you in so many different situations and conditions. Well done Monster. Onwards and upwards, darling. Here’s to many more adventures 🏍️ I love you ❤️
@HaynesGarage2 ай бұрын
Love you too. Can’t wait to write more exciting chapters with you, the kids, and Nutmeg. ❤
@bazm12 ай бұрын
Hi Katy. I don't know whether you have an iridium spark plug installed, but I had one on mine, which was stalling and running very badly so I decided to put the old regular one back in and now it running like a Swiss watch. Just a thought.
@howrrmr.71722 ай бұрын
My 650gs 2000 mileage 36000 Km.... Had stalling and power loss issue and today's simple remedy fixed it entirely. ISC cleaning. Throttle body cleaning. including cable and return spring. ISC was stuck by carbon soot severely and cleaned easily by spray cleaner. Now it runs great .Back to normal.
@baubau09783 ай бұрын
Hello Katy. Please check fuel pump pressure. Ia rated to 3.5bar. under that pressure is pump fault. And the last test ,continuity of 28 pins wires from bms to all conections. Great effort from your side. ❤
@gregdyar64513 ай бұрын
This might help i had a similar problem. It started in the fuel tank, so i cleaned the strainer, and the tank didn't cure it, but i took out the injector, cleaned the body, and nosel, and i ran fuel through it before putting it back together. I think i cleaned it with carb cleaner. I hadn't had a problem since. Might be worth a try before giving up
@howrrmr.71723 ай бұрын
I had silly falling down due to silly engine stall just after start-off and turn right. I have lived with my 650gs for 20 yrs AND this stupid stall... Oxygen sensor is shot, but I know it works anyway even with shot sensor as default value , just bad fuel consumption. I will be letting my monster go around 2035 with mileage 100K Km....hopefully. I wish you a great new start with new another monster soon. Happy ride!
@jOHNB8Y3 ай бұрын
I know how much time you have put into this bike through your videos. Your vids have been very helpful!
@HaynesGarage3 ай бұрын
Thanks John. I think Monster will be sold soon and then I can start a new chapter with a new bike :)
@ct0263 ай бұрын
@@HaynesGarageA Sertao surely!!! 😂
@madheadmadDAZ3 ай бұрын
I saw your add on auto trader couldn't find your channel with "Haynesgarage" the bike obviously means a lot to you. Why not get another engine? Keep the old engine for spares?
@kroscu27184 ай бұрын
Merhaba 2000 model bmw 650gs marş rublesi ile 2002 aynımı teşekürler
@muhammettokay30264 ай бұрын
3:32 How many nM did you tighten the nuts?
@tosstones4 ай бұрын
Como se llama esa manguera que va a la botella que pusiste al otro lado?
@JamesMcCreadie714 ай бұрын
no good if it's doing your head in. Hope you get it away
@normaligator4 ай бұрын
😢 good bye BMW. However I did the same, I just couldn't resist the new Yamaha T7
@JamesMcCreadie714 ай бұрын
Sorry to hear it kicked you butt! What's on your radar?
@Gruxxan4 ай бұрын
theres a bmw recall for these bikes for wiring loom chafing on weld spatter on the frame.
@kroscu27184 ай бұрын
Benim f650gs 2000 model bana acil yardım lütfen Motor çalışıyor düşük devirde rolanti de stop ediyor sorunu bulamadım😢
@kroscu27184 ай бұрын
❤videolarınızı takip ediyorum
@Gruxxan4 ай бұрын
hi, if you get an OBD2 reader, a cable to connect it to the bike, and motoscan app on an android phone, you can get a lot of information from that. the socket is under the right hand fairing. by the way, thats an ambient air temperature sensor, not air pressure sensor
Late to the party , but wondered if you had ever checked into the rear wheel speed sensor causing the loss of power or stalling? I had a K bike years ago that had a similar issue.
@RowanWatson-ye2le6 ай бұрын
Hi there, I ve been watching with interest and have had to do all the same repairs as you! Great bike when they work.... Mine has the same problem with stalling. I checked out the idle valve and when I took it out the plunger and spring popped out. Eventualy got it back together and the bike was running quite well again. took it to get a diagnoistic and during the testing it started playing up again so I m pretty sure thats the problem. Just got to get a new one I think and they are nt cheap! At least its easy to fit.
@Joshua-g1k6 ай бұрын
Has anyone ever had the reservoir not empty while bleeding the brakes? Any ideas?
@HaynesGarage6 ай бұрын
Is your rear brake master cylinder corroded and seized up? Is your brake functioning normally? I’ve had a few of these break on this bike due to water seeping in past the rubber grommet on the top
@Joshua-g1k6 ай бұрын
@@HaynesGarage rear brake caliper was corroded so completely removed and reconditioned it put it all back together and now cannot bleed the brakes can't get fluid to come from the reservoir brake master cylinder was working properly
@partyguarder6 ай бұрын
Wow Katy, your bike has done its share of miles! 👍 I was wondering if perhaps there is a vacuum building up in the gas tank, due to a faulty vent system? If when the problem occurs again, simply pop open the gas cap and see if the issue relieves itself. If so, that may be what the problem is. Cheers and best of luck! From a fellow BMW rider (F800ST), Steven
@edwardgolonka-jd4sc7 ай бұрын
Change ur knickers 😮
@davesimmons-aclassicmotorc58127 ай бұрын
I just got the same dust seals from Pyramid and yeah had the same thought about the different desigb but the old spring clip design didn’t appear to exert much pressure so I’m hopeful the new ones will be ok😂 Old fork seal was a real pig to get out, top tip that worked is heat gun on outside of aluminium slider until good and hot then slider in vice and slam out with the fork tube and both hands!
@sammyperez79738 ай бұрын
There was oil in my air filter body if you didn't have this problem why am I...
@lancelammie11748 ай бұрын
I am from st.lucia and I got a f650gs and in need of a radiator cap any help
@lancelammie11748 ай бұрын
🎉 cheers
@steveb9368 ай бұрын
Have a ride down to the Canary Islands, I'll sort the little engine problems its got for you, unfortunately twisting the throttle does not reset anything
@steveb9369 ай бұрын
Fantastic, you guys from Essex?
@roblock26309 ай бұрын
Just stumbled across this playlist and had to watch it. What an incredible journey you guys had. Very inspiring.
@HaynesGarage9 ай бұрын
Thanks Rob, that’s very kind of you to say. I’m pleased we made a dream a reality. Hope you have some fun adventures planned for 2024.