9 ай бұрын
11 ай бұрын
Пікірлер
@StudentPilot4Life 15 күн бұрын
Private Pilot Playlist: kzbin.info/aero/PLz_-gubei-JIq0rWguEIoMU-eZqc-Sza6
@StudentPilot4Life 15 күн бұрын
Private Pilot Playlist: kzbin.info/aero/PLz_-gubei-JIq0rWguEIoMU-eZqc-Sza6
@Elvislennoncash 16 күн бұрын
What tool did you use to unscrew the screws on the throttle quadrant ?
@StudentPilot4Life 16 күн бұрын
A small hex key Allen wrench. The same one works for both Alpha and Bravo. Something like this would work: a.co/d/aOL4TNQ
@f0v3r. 24 күн бұрын
the laptop makes it realistic because it sounds just like a real aircraft
@StudentPilot4Life 24 күн бұрын
👍 Sounds even better when using external speakers!
@vadermike7772 26 күн бұрын
very good setup, i like the under the desk mounts much better.
@StudentPilot4Life 26 күн бұрын
Thanks!
@lebojay Ай бұрын
Nothing I ever bought from Thrustmaster survived more than a couple of years of light use, and that included my $500 Cougar HOTAS.
@StudentPilot4Life Ай бұрын
Sorry to hear that! Did the stuff just stop working? Or did it break down mechanically/physically?
@StudentPilot4Life Ай бұрын
Flight sim setup videos: kzbin.info/aero/PLz_-gubei-JJcAZFcbvd-bvW9CaMWSPy9
@StudentPilot4Life Ай бұрын
Private pilot playlist: kzbin.info/aero/PLz_-gubei-JIq0rWguEIoMU-eZqc-Sza6
@StudentPilot4Life Ай бұрын
Private Pilot Playlist: kzbin.info/aero/PLz_-gubei-JIq0rWguEIoMU-eZqc-Sza6 Flight Simulator Setup videos: kzbin.info/aero/PLz_-gubei-JJcAZFcbvd-bvW9CaMWSPy9
@frankhsu7465 2 ай бұрын
Hi. How would you rate TPR against Charlie Pedals? Thanks
@StudentPilot4Life 2 ай бұрын
Hi! I haven’t tried the Charlie pedals yet, so I don’t have a basis for comparison. As for TPR, it’s a fantastic piece of hardware when coupled with the damper mod. Although, it’s quite expensive :|
@frankhsu7465 2 ай бұрын
@@StudentPilot4Life thank you for the reply. Have you had any issues with damper mod since you purchased?
@StudentPilot4Life 2 ай бұрын
@@frankhsu7465 No issues, damper mod has been working great!
@StudentPilot4Life 3 ай бұрын
- Private Pilot Videos - kzbin.info/aero/PLz_-gubei-JIq0rWguEIoMU-eZqc-Sza6 - Flight Simulator Setup videos: kzbin.info/aero/PLz_-gubei-JJcAZFcbvd-bvW9CaMWSPy9
@Starsnu1 3 ай бұрын
Excellent video that clearly explains the proper installation of this device. I wasn't aware that this mod was even available and after watching the video, I'm tempted to buy one. I love my TPR's and I've had them for at least 5 years. Do you find you can get much more resistance with this device? That is really my biggest gripe on these pedals. The springs are way too light. Thanks for a great video.
@StudentPilot4Life 3 ай бұрын
Yes! The damper mod takes the TPR to another level. Totally worth the investment, highly recommend it.
@Starsnu1 3 ай бұрын
@@StudentPilot4Life Thanks so much. I'll order it today!
@StudentPilot4Life 3 ай бұрын
@@Starsnu1 Enjoy! And thank you for stopping by.
@pgreenx 3 ай бұрын
I have the same rudder pedals and don’t like them at all.
@StudentPilot4Life 3 ай бұрын
I have since replaced the Logitech pedals with Thrustmaster TPR. I like the new ones much better. And now I can’t blame my terrible centerline jobs on the rudder 😂 Thanks for watching!
@pgreenx 3 ай бұрын
@@StudentPilot4Life i’m looking at the thrust master pedals also. But I’m also looking at the virtual fly ruddo pedals. Just curious if you looked at those before buying the thruster.
@StudentPilot4Life 3 ай бұрын
@@pgreenx I didn’t evaluate many others that were not on Amazon. TPR was listed on Amazon US and had very good reviews, so I just went with it.
@mikaelcedergren8984 3 ай бұрын
Thanks for your answer. I really like the idea of a G1000. I assume you really like it? I am hesitant if I should go the two touchscreens+air manager+knobster, the Flightsimbuilder G1000 or even the RSG G1000. Of course the touchscreens and Air manager route would allow more flexibility flying different aircraft and avionics but on the other hand, this looks darn amazing and realistic.
@StudentPilot4Life 3 ай бұрын
I am training for my instrument rating so the g1000 hardware helps build my muscle memory wrt the placement of controls. If I wasn’t using this for training, I would have gone with the Air Manager+Knobster setup for the flexibility and lower price point. The RSG G1000 units are very attractive. Although, a comparable setup with RSG would have cost about $800 more. I assume the RSG controls feel much more ‘premium’ but I haven’t used one yet.
@CessSim 3 ай бұрын
Looks good and I also prefer the physical G1000 which I have in my build !!
@StudentPilot4Life 3 ай бұрын
Thanks! Do you have the panels from FlightSimBuilder as well? Or a different company?
@mikaelcedergren8984 3 ай бұрын
would you say the units wobble at all when secured with the clamps under the table? I read Honeycomb adviced against this saying the screws will be too stressed and are not designed to hold the weight. What is your experience after some months of use, still working well? thanks
@StudentPilot4Life 3 ай бұрын
I hadn’t thought about this until I saw your comment. The screws are indeed quite small and I can see why Honeycomb would advise against it. But this setup has held up nicely. No issues so far.
@BihonlignDesta 3 ай бұрын
wow I like it pls on CDI
@StudentPilot4Life 3 ай бұрын
Glad you like it! What would you like to see about CDI?
@StudentPilot4Life 3 ай бұрын
Flight Simulator Setup videos: kzbin.info/aero/PLz_-gubei-JJcAZFcbvd-bvW9CaMWSPy9
@crazyhorse088 3 ай бұрын
Following your excellent instructions on the video. I have a problem when stretching the window before moving it to the G1000 screen. The window stretches both vertically and horizontally at the same time while i am pulling the right side to the right. Any ideas on how to fix?
@StudentPilot4Life 3 ай бұрын
XPlane recently changed the behavior in the 12.1 release (not sure exactly which beta version). I have been meaning to file a feature request (or bug report) to restore the old functionality (or provide a full screen option), but I haven’t had the time :(
@crazyhorse088 3 ай бұрын
@@StudentPilot4Life ok thanks. I am not going bonkers! Anxious awaiting your update!
@StudentPilot4Life 3 ай бұрын
@@crazyhorse088 I have filed a bug report using XPlane's bug report form (www.x-plane.com/x-plane-bug-report-form/). Considering user interface issues are usually not prioritized by Laminar, I am not holding my breath for this to be fixed anytime soon. Here's a video that I sent to Laminar demonstrating the issue: photos.app.goo.gl/VvzjdtoSGDVegcvi9
@crazyhorse088 3 ай бұрын
@@StudentPilot4Life My tech support coach found a fix for the problem and my FSB G1000 suite is working fine. I think he found an article on RealSimGear and applied it to my FlightSimBuilder suite. It had something to do with the XPlane Output/preferences/Miscellaneous.prf file. He changed some values in the code and also moved the monitors and centered them below the main monitor to move each screen down. He also clicked the check mark to turn back ON snap windows in settings. Not sure if I'm making much sense here, but bottom line the panels are working! Hopefully Laminar will fix the issue. Thanks for reporting the bug.
@StudentPilot4Life 3 ай бұрын
@@crazyhorse088 That’s great to know! When you say ‘tech support coach’, are you referring to FSB tech support? Or something else?
@goatwes4577 4 ай бұрын
good content
@StudentPilot4Life 4 ай бұрын
Thank you!
@rkApps-shop 4 ай бұрын
Thank you for mentioning rkApps and SimHaptic 🍺🛩️
@StudentPilot4Life 4 ай бұрын
It’s a great piece of software, thanks for making it!
@andybanov4319 4 ай бұрын
Great video thanks
@StudentPilot4Life 4 ай бұрын
Glad you liked it. And thank you for stopping by!
@MiElas 4 ай бұрын
Awesome!
@StudentPilot4Life 4 ай бұрын
It’s a great product. Thanks for stopping by!
@StudentPilot4Life 4 ай бұрын
Flight Simulator Setup Playlist: kzbin.info/aero/PLz_-gubei-JJcAZFcbvd-bvW9CaMWSPy9
@StudentPilot4Life 4 ай бұрын
Private Pilot Playlist: kzbin.info/aero/PLz_-gubei-JIq0rWguEIoMU-eZqc-Sza6
@ducsue751 4 ай бұрын
Hello there. I do not have extra usb A type connector. Is it possible for you to measure the length of the cable the pedals comes with? I have a feeling it will be too short for my desk setup. Thanks if you could.
@StudentPilot4Life 4 ай бұрын
It’s about 6.5 ft.
@ducsue751 4 ай бұрын
Are you waiting out for the Charle pedals?? I am just getting into simming. Have purchased the MSFS 2020 a few days back when Steam had it on sale. My initial thought was to go somewhat budget friendly controller and had in mind on the Beach Turtle VelocityOn Flightstick since I can use all the controls in one device and not have to buy throttle and rudder. Then, I thought more into this and with the limited storage space I have. I will eventually upgrade to better controllers later. So, instead of having many controllers I will not be using and not have room to store them. I am going to get all Honeycomb. I have purchased the xpc yoke. The Bravo is on its way. For the rudder, I was going to get the Charle, but having second thoughts. My desk floor space will fit barely. The Charle is quite big dimension wise. I am looking at the Thrustmaster TPR now. The size reasonable for my case. It's tall but not really an issue. My question is. How is this rudder compare to the Charle. I know the charle isn't available world wide and one a few have them, but I am not convince if the Charle pedals is better then the TPR. Honestly, I would rather go with all Honeycomb lineup, but the space is holding me back. The TPR isn't aesthetic looking since my desk is also a work space.
@StudentPilot4Life 4 ай бұрын
@ducsue751 I am not waiting for the charlie pedals as I bought the Thrustmaster TPR pedals recently. I have linked the videos below. I had the (much) cheaper Logitech pedals to start with but I did not like that one and ended up upgrading. TPR has been around for quite some time and I have only heard good things about it. Hard to say how the Charlie pedals will compare, but if the TPR's cost is not a concern, hard to go wrong with it. I added the damper mod as well, and the combination is fantastic so far! I have a similar setup - my work desk is right next to the sim desk and I use some of the peripherals with both setups. But it's getting cluttered. I am going to separate them and keep both the setups distinct from each other. Want to avoid looking at the flight controls and getting distracted while trying to get some work done :) Here are the video links if that helps: TPR unboxing: kzbin.info/www/bejne/oJfWcqyPfriahac Damper mod: kzbin.info/www/bejne/ZmTQpaVtjqiJq6c
@Combination12345 4 ай бұрын
I just got the Thrustmaster TPR as well and really enjoying them. They are all metal, very sturdy and precise. I never had a set of rudder pedals before and was holding out for the Charlie as I already own the Alpha yoke and Bravo throttle quadrant. But after waiting two years I gave up and went with Thrustmaster TPR. Sorry Charlie, too late.
@StudentPilot4Life 4 ай бұрын
@@Combination12345 Nice! Enjoy the TPR pedals. They really enhance the flight experience.
@chris-ryan 4 ай бұрын
Hopefully nicki has regained control of the company. From what i have read, Mike is not to be trusted.
@StudentPilot4Life 4 ай бұрын
Hard to say who is in control of the company at this point. Don’t see any names at the obvious places on the website.
@raymarshall6721 4 ай бұрын
It's a shame they burned the bridge with the entire flight simulator community. I have been waiting 2 years for a refund, former CEO was served in the lawsuit a year ago for 2.1 million dollars in San Diego. Even under new leadership, they haven't honored a single promise. Anyone who willingly trusts them, it's either a fool or to hasn't really looked into their past.
@StudentPilot4Life 4 ай бұрын
Sorry to hear that you have been waiting 2 years for a refund. That’s extremely frustrating. I hope you get your money back soon!
@StudentPilot4Life 4 ай бұрын
Flight Simulator Setup Playlist: kzbin.info/aero/PLz_-gubei-JJcAZFcbvd-bvW9CaMWSPy9
@YiannisD 5 ай бұрын
At that price, how come you didnt get a VIRPIL or WinWing ?
@StudentPilot4Life 5 ай бұрын
Most of the reviews I had come across were for the TPR, and almost every review was positive. I did come across some mentions of Virpil but not enough to sway my buying decision. WinWing looks interesting, I wasn’t actually aware of this brand until you mentioned it. I’ll have to look into their products more.
@YiannisD 5 ай бұрын
@@StudentPilot4Life I know a lot of sim enthusiasts that opt for these two brands, as the hardware is beyond amazing. Pricey, but you get your money's worth! Also on thel 'lower' budget there's VKB. PS: I'm not against Thrustmaster. TPR is great, but 1for the amount of money spent, you can get much more better.
@mrfairycake4333 5 ай бұрын
Brilliant but the shipping to the UK cost more than the mount. So it's a no go :(
@StudentPilot4Life 5 ай бұрын
Ugh… international shipping is quite expensive. Hope you find something local that serves the same purpose!
@ThroughThe_Loop 18 күн бұрын
If you still haven't got one yet, I'm in the UK and used flightsimwebshop. I only bought one for the honeycomb alpha and it was £35 including delivery
@RameshBabu-dd1ut 5 ай бұрын
Try with SmartFly yoke
@StudentPilot4Life 5 ай бұрын
I am hearing good things about the new yoke on the block. Will definitely keep it on my radar, but I hope my Alpha lives for few years!
@unclealig 5 ай бұрын
looks great, but a 599$ expensive rudder pedal should not need any mods in my opinion.
@StudentPilot4Life 5 ай бұрын
Totally… I wish the whole thing didn’t cost as much.
@Triple7guy 5 ай бұрын
Wow, I wasn't aware of this addon for the TPR. Thanks for sharing.
@StudentPilot4Life 5 ай бұрын
👍 Enjoy! Thanks for stopping by!
@bradule1980 6 ай бұрын
Thx for this. What material are those 3d printed damper holders that are attached to the pedals? Are those parts durable?
@StudentPilot4Life 6 ай бұрын
They seem pretty sturdy and durable. I’ll see how they hold up after few months of usage. Not sure what the 3D printing material is… feels like solid plastic.
@JMHTruck32005 6 ай бұрын
Just as a heads up...5:47 Looking at the 3 cables on the back, the one that goes to the top of the long bar...The little square box where the cable goes in is where the "Hall Sensor" is If you look at carefully you will see it from underneath, check occasionally for dust and stuff. If you have pets the pet hair and dust can collect there, don't ask me how I know...Weird things start happening with calibration.
@StudentPilot4Life 6 ай бұрын
Oh dang! Did not realize there's a chip at the bottom of that plate just above the silver bar. I see it now that I know to look for it. Will keep an eye on it - thanks a lot for this info!
@JMHTruck32005 6 ай бұрын
@@StudentPilot4Life You bet...
@JMHTruck32005 6 ай бұрын
Your video "Install Honeycomb under desk mount from FlightSimBuilder" led me to buy them. And now this...I have had my TPR for a long time, DCS and Xplane and now MSFS PC. I almost picked this kit up in Xplane...TPR's are far from perfect and the sloppy centering has always frustrated me. I would love to see you do a follow up on this, Does it any have problems in day to day use, any failures with the printed parts?
@StudentPilot4Life 6 ай бұрын
Hope you are getting good value out of the videos! The 3D printed parts seemed fine when I installed them. Will definitely do a follow-up video after few months of usage and report any issues I encounter.
@JMHTruck32005 6 ай бұрын
@@StudentPilot4Life Sweet on the follow up...And please keep doing these, you are doing things I've not seen any where else...
@StudentPilot4Life 6 ай бұрын
Flight Simulator Setup videos: kzbin.info/aero/PLz_-gubei-JJcAZFcbvd-bvW9CaMWSPy9
@_alexmuerto_ 6 ай бұрын
my PAR is this upcoming Sunday, scared
@StudentPilot4Life 6 ай бұрын
@_alexmuerto_ You will do great! Get plenty of rest the night before, stay hydrated, and eat well. Good luck to you!
@_alexmuerto_ 6 ай бұрын
@@StudentPilot4Life I PASSED!! thank you very much and sorry for the late response😅
@StudentPilot4Life 6 ай бұрын
@@_alexmuerto_ That is fantastic! Congratulations, and wish you all the best for the rest of your training!
@chetmyers7041 7 ай бұрын
Waiting for more.
@StudentPilot4Life 7 ай бұрын
Thanks for stopping by and taking the time to comment. This is great motivation for me to produce more content!
@chetmyers7041 7 ай бұрын
6:45 Up/Down table action is sweet! Great setup.
@StudentPilot4Life 7 ай бұрын
Thank you!
@StudentPilot4Life 7 ай бұрын
Private Pilot Playlist: kzbin.info/aero/PLz_-gubei-JIq0rWguEIoMU-eZqc-Sza6
@kennykanada 7 ай бұрын
Great idea! But that’s over $100 each Canadian! A simple metal plate with holes drilled may do the job, and for just a few bucks.
@StudentPilot4Life 7 ай бұрын
@kennykanada These are USD 35 a piece, so about CAD 50 for one. But you have a good point, can drill holes into a scrap metal bar or even resin bar to get the job done.
@kennykanada 7 ай бұрын
@@StudentPilot4LifeThey wanted another $35US delivery! I just want to get my Bravo throttles lower like in the real life Beech Baron 58 (what I mostly fly in msfs).
@StudentPilot4Life 7 ай бұрын
@@kennykanada Ah! International shipping can be pricey… I didn’t think about that! Hope you find something local to mount them under the desk!
@kennykanada 7 ай бұрын
@@StudentPilot4Life Thx! I may not bother because I’m waiting on my Yaw2 motion rig delivery.
@StudentPilot4Life 7 ай бұрын
@@kennykanada That’s awesome! I have been eyeing the 6 dof platform by DOFReality. Will look into the Yaw3 as well. When does your rig arrive? Would love to get a first hand review.
@vardagsteknik6576 7 ай бұрын
The starter motor is on all the time. That's why it sounds like it does from the motor. And it will also drain the battery.
@StudentPilot4Life 7 ай бұрын
Yes! Took some time to realize that was the case, since the Honeycomb Alpha’s start switch is not spring loaded.
@vardagsteknik6576 7 ай бұрын
The new version of Alpha XPC has that sorted out.
@StudentPilot4Life 7 ай бұрын
@@vardagsteknik6576 Good to know...thank you for sharing!
@ajandrade1 7 ай бұрын
Thanks for your video. But ther is a problem when paste the new file in custom folder. It disable all other data...so it is only usefull if we want navigate in US only. THanks anyway.
@StudentPilot4Life 7 ай бұрын
@ajandrade1 - Ah, thanks for sharing that finding. I fly US only at this time so I only checked with FAA data file within US borders. Also, I am curious if a similar approach exists to update the nav data worldwide, without having to pay a fee to a 3rd party provider.
@HR-313 7 ай бұрын
Hey mate. Nice vid. Can you tell me where did you get the mounting bracket plates from? Were they designed by honeycomb? Can you send a link ? Thanks
@StudentPilot4Life 7 ай бұрын
@HR-313 The under-desk mount is made by FlightSimBuilder. Link is in the video description. Thanks for stopping by!
@StudentPilot4Life 7 ай бұрын
Here it is again: flightsimbuilder.com/collections/2nd-row/products/honeycomb-under-desk-mount
@HR-313 7 ай бұрын
@StudentPilot4Life thanks for your quick.response!
@StudentPilot4Life 7 ай бұрын
Flight sim setup playlist: kzbin.info/aero/PLz_-gubei-JJcAZFcbvd-bvW9CaMWSPy9
@theduffman8125 7 ай бұрын
Firstly, thank you for making me aware that these under desk mounting plates were commercially available. Secondly, can you tell me in your opinion, what is the required measurement for mounting both the Alpha and Bravo side by side (how much room do I need) ? Like you, I have limited space to work with on top and underneath the desktop ! I look forward to hearing from you at your earliest convenience, duffman581
@StudentPilot4Life 7 ай бұрын
@theduffman8125 Glad you found it useful! Both alpha and bravo mounted next to each other with the under desk mounts shown in this video, it’s about 32 inches.
@hitchcock_ 7 ай бұрын
YES!
@StudentPilot4Life 7 ай бұрын
Loving it so far!!