My tape is stuck and I can't turn any wheels to get it out. I put a new fuse in but it blows fuses as soon as you plug it in. Any ideas? I don't want to destroy it to get my tape out.
@shadymaint18 ай бұрын
You can get replacement twist locks pretty cheaply. They are available with and without bulbs in them. I've got some white and red LEDs with some new twist locks coming.
@RhondaGreene-s6n9 ай бұрын
Hi, can you share the location of the ignition/coolant cover that needs to be removed to do the repair?
@cilentofarmer39299 ай бұрын
Ciao il mio quando cambio marcia si accendono tutte le luci e lampeggiano come mai?
@camholmes714110 ай бұрын
I just shared this video to the 99-02 Chevy group on Facebook. You’re about to be an overnight sensation bro.
@SianaGearz Жыл бұрын
Well this is hardly very descriptive of how you actually made it... what sort of switch, where have you placed it, whether you have used return spring and where you put it, and what kind it is...
@ryankirk222 жыл бұрын
been trying to figure this out for days. so happy I came across your video, thanks!
@belowfray52512 жыл бұрын
Out Freaking Standing. I think I will go with a lawn mower cable. Good on ya.
@gabrielgodinez85212 жыл бұрын
My door does that same beep and the Door does not open, heeelp
@hhstarwars2 жыл бұрын
Thank you sooooo much for making this, couldn’t find anything on replacing, my 2000 bombardier ds650 was doing the same thing.
@fastwayimpo2 жыл бұрын
Hi can you help me?
@wolfteam24003 жыл бұрын
Do you have to Sauter it
@bradfitzgibbon68753 жыл бұрын
Cool video. The 95 Sierra has 160-200hp. It has a 350 engine. The 350 is referring to the size of the boars and pistons.
@blue2804853 жыл бұрын
👌👍😀 I'm ❤️ it
@craiggoldstein24613 жыл бұрын
I have a Magnatron with a cracked magnet. I am told the reason why the magnet cracked is the Magnatron overheated. I'm concerned the new Magnatron will do it again. Has your acted up again?
@djc3503 жыл бұрын
I have a bombardier ds 650. Same issue. Is it a costly fix?
@williammosley2133 жыл бұрын
Do you have a video on removing the rotor? Struggling bad trying to get to the spray clutch.
@Lucas-vk8fz3 жыл бұрын
How'd you make out removing the stator? Just curious cause I gotta tackle this on both my 500 traxters..seems like an issue everyone that owns one of these has.
@MrLineman6933 жыл бұрын
Thanks for the info
@laurachilton90673 жыл бұрын
My daughter learnt to ride at 2 years 4 months!!
@RBoysMedia4 жыл бұрын
Hello! I’ve been trying to fix my buddies, not too many videos of these out there but his sounds just like yours. His starting gear has some bad teeth as well. He went through 3 starters before realizing something was wrong lol. Do you think it’s the Strag clutch? Or both
@verinb94 жыл бұрын
Total badass! U r like Luscious from Batman coming up with ideas like this. 👍🏾
@nickblauvelt1564 жыл бұрын
How big of a job is this?
@donaldsaunders30594 жыл бұрын
I have the same problem with my bike. 2001 bombardier traxter 500. I was just wondering if the bike is worth getting fixed because it’s almost 20 years old. Thanks
@josephgoossen19724 жыл бұрын
I am doing the same job on the same atv. Your video is extremely helpful! I'm wondering if you installed a crankshaft locking bolt to complete the job? Owners manual says to install by removing the rewind starter, front drive shaft, and the clutch cover. I want to avoid taking the front of the motor apart if that's possible. Thank you for the video
@Konganut4 жыл бұрын
Hi! I just got this VCR but for some reason my it won’t ply any of my tapes. Do you know how to fix this?
@lewko14 жыл бұрын
Or you could just run with your finger on the sensor at all times. It's the perfect failsafe. If you fall off the treadmill, your finger will come away from the sensor, stopping it. I'll take my cheque now...
@ines18574 жыл бұрын
Even when I put the magnet on the sensor it works and it stops suddenly why?
@tylersobkowiak98744 жыл бұрын
Any insight on when aligning the cover back on the motor where you have to have it aligned so it shifts correctly
@willmarchingtoniv64834 жыл бұрын
Puller part number by any chance or how yo pulled the stater
@tickyul5 жыл бұрын
YEEHAW, Trailerbilly technology at its best!!!!!!!!!!!!!!
@Spyronox4685 жыл бұрын
Mine won’t even open when it’s closed when I actually pull the handle
@unlimitedwealth15 жыл бұрын
Last checked my van and I was thinking of the same thing. you confirmed our vans have the same issues thanks
@Mattstafford20095 жыл бұрын
Cute! But where's her helmet?!?
@SleepyBoiii5 жыл бұрын
I have a PC195 ... Is PC194 AND PC168 same connections?
@luisgarcia-xy8dk5 жыл бұрын
What size socket did you use to take off the fly wheel nut?
@winstonbanks10575 жыл бұрын
I have the Wagner PC194 bulbs and I think this what you did will work on my car going to try it now
@sergeantwilliams49115 жыл бұрын
Great video. Lots of help
@someasianguy37936 жыл бұрын
I have a 1993 Roadmaster, these same wagner bulbs are offset from the locking tabs on the twist socket, replacement ones you can get online say they are the same BUT those are perpendicular to the lock tabs. these are at a 30°, and my board is specifically made for that offset, the perpendicular ones twist too far, and pass over the boards contacts... This video has saved my skin using my old blown bulbs (btw, use the aftermarket tabs, they allow you to easily slide the wedge in instead so they are not permanently soldered)
@Lou_Zasil6 жыл бұрын
very helpful thanks
@92aleyda6 жыл бұрын
You just fixed my problem 🤗 i literally ran to my van and boom, one side didn't have it and i remember cleaning out my van one time and throwing that thing away not knowing what it was haha for now i used a pencil eraser from my sons box haha thanks!!! It worked!
@clipsonque5 жыл бұрын
That's awesome! I'm so glad you found it helpful :)
@TheTrueno8096 жыл бұрын
Thanks so much changed the check engine light bulb in my car
@hawkeye2sb16 жыл бұрын
How do you access the panel? Do you have to remove the whole motor?
@clipsonque5 жыл бұрын
Yes, I did pull the whole motor unit. However, I have heard of people getting the ignition cover off by removing the back axle and doing the repair without removing the engine.
@luisgarcia-xy8dk6 жыл бұрын
Can you make a video on removing ignition cover on bombardier 500
@luisgarcia-xy8dk6 жыл бұрын
Bombardier traxter 500*
@brayannexon46136 жыл бұрын
Another easy fix that requires no soldering iron is to get the twist sockets off a 95-02 chevy express van (GMC Savanna works too) those have modular sockets that will take t10 bulbs (the small t5 ones too for the turn signals) with no mods and work fine with other GM products I put them into my chevy blazer which had the same soldered sockets but I swapped them with the ones off the van. They work fine I got them off a pick your part junkyard for free.
@cameronspraker58346 жыл бұрын
Do they dim?
@brayannexon46136 жыл бұрын
Cameron Spraker gmt 800 trucks and gmt 330 suvs have a very similar instrument cluster. So in my chevy blazer (gmt 330 product) the leds will dim but barely then they will turn off.
@SArtisto16 жыл бұрын
Weird. My cars have the exact same design, only that the light bulbs pop out without having to cut anything.
@wildreg6 жыл бұрын
Hi would this work on a 1985 Chevrolet Caprice Classic the instrument cluster uses all 194 bulbs?