Пікірлер
@Crawdad_Nick
@Crawdad_Nick Күн бұрын
@tallymouse were you using a 11900K processor to test the Pimax Crystal Light? Thanks!
@tallymouse
@tallymouse Күн бұрын
@Crawdad_Nick 11900KF overclocked to 5.2GHz (water block) throughout.
@iboviper
@iboviper 2 күн бұрын
Should I install ultraleap through steam or downloaded installer from web?
@tallymouse
@tallymouse 2 күн бұрын
@iboviper installer from the ultraleap website, as shown in the video
@iboviper
@iboviper 2 күн бұрын
​@@tallymouseokey, thanks :) Even if I am not using pimaxxr, only steamvr?
@tallymouse
@tallymouse Күн бұрын
@@iboviper Yes. The Ultraleap service works independently of steamvr or openxr
@user-lf4bj5gx7b
@user-lf4bj5gx7b 2 күн бұрын
Thank you for this video. Extremely helpful for us non 4090 users. I found this after posting on one of your other videos. Very nice. 👍🏻
@user-lf4bj5gx7b
@user-lf4bj5gx7b 2 күн бұрын
I’m a VR NOB what do you mean by Hand tracking? Is that like gloves for DCS? Also YES on we need reviews from NON 4090 users. 95% of us can’t afford a 4090. Thanks
@Crawdad_Nick
@Crawdad_Nick 2 күн бұрын
Tallly Mouse I think you made a mistake with your motherboard specs. I’m sure you have an ASUS Maximus XIII Hero with an 11900KF and not an VIII series. Glad to see that the Crystal Light runs well on a 11900K with a 4090 GPU! Thanks!
@foreignmandirector
@foreignmandirector 3 күн бұрын
This video is amazing! Thank you!
@Adrian3712
@Adrian3712 4 күн бұрын
Was the CPU 11900k kept constant throughout these tests?
@tallymouse
@tallymouse 4 күн бұрын
@Adrian3712 Yes sir. Exactly the same rig used, just swapped out the GPU.
@neo2264
@neo2264 9 күн бұрын
I find it extremely hard to find any information at all about whether or not the crystal light supports prescription lens inserts / interchangeability, both in online reviews and on the official website. You'd think this was an extremely important aspect to consider with any VR headset.
@tallymouse
@tallymouse 8 күн бұрын
@@neo2264 The lenses should be near identical to the OG Crystal, so Crystal inserts should work fine. May be worth checking directly with HonsVR, or whoever your preferred prescription lens provider is.
@hi-endfilm1565
@hi-endfilm1565 9 күн бұрын
Comment for the algorythm. Good work bro
@mikelintner9043
@mikelintner9043 11 күн бұрын
If you have a AMD GPU, Pimax is not for you. It is bad enough that I ordered this in May and it just arrived 3 days ago. In the three days I have had the Pimax Crystal Light, I have not been able to get my computer (Ryzen 7900X3D, Radeon 7900 GRE) to recognize it and start it up. I have left 2 tickets with Pimax support and I have received 2 notifications that no one is at their desk. No one is on Discord for Pimax. No one answers Pimax chat except to tell you to leave a ticket. This product and it's creating company are far below acceptable.
@StringBanger
@StringBanger 16 күн бұрын
This is awesome! I was going to build a full H145 heli sim with displays etc but now all I need to do is layout the buttons to scale, add encoders, mobi flight and program. This will be far cheaper to build than the full Baron G58 FS2020 sim I built on my channel. Don't have to worry about back lighting, projection displays or anything. Perfect!
@kornykidd0
@kornykidd0 21 күн бұрын
Your swappable cockpit units are a brilliant idea. Almost like swapping steering wheels for sim racing you’re doing it with full front panels 😂. From the video it looks like the leap support is MUCH better than what I saw from a couple years ago. I thought support was more or less dead in DCS but it looks like they haven’t stopped. Are you just using the VR hands as a guide to help you hit your actual button panels, or are the vr hands set up to actually trigger the button presses?
@tallymouse
@tallymouse 21 күн бұрын
@kornykidd0 Thank you! I am using the hand tracking as a guide to lead my fingers onto the real buttons.. it's now +/- 2-3mm so works very well. It's very immersive, and even when crazy high quality MR comes along in the coming year, I think I would still prefer this:. An MR cockpit doesn't have shadows and the sun tracking across it, just the normal illumination of your room!
@kornykidd0
@kornykidd0 21 күн бұрын
@@tallymouse agreed! MR is cool, but this makes the immersion better I think. Great job
@Bullet4MyEnemy
@Bullet4MyEnemy 21 күн бұрын
For me the quadviews thing in XR is greyed out? I thought it was only something the Crystal Super could do with eye tracking?
@tallymouse
@tallymouse 21 күн бұрын
The OP Crystal can do it too. Just checking, do you have QuadViews installed in addition to OpenXR Toolkit and PimaxXR?
@Bullet4MyEnemy
@Bullet4MyEnemy 21 күн бұрын
@@tallymouse I think that was the issue, I saw it was greyed and jumped the gun before reading the text underneath with the link 😅 Having an issue at the moment though where DCS boots in VR mode and my headset tracks for the game because I can see it move on the screen mirror. But looking through the headset I just see the space place that acts as a screen saver…
@axeyz8303
@axeyz8303 21 күн бұрын
@@Bullet4MyEnemy saw your post about the vr headset. Looking forward to your videos about it!
@peppetheking7
@peppetheking7 24 күн бұрын
Can you post settings for games like iracing please?
@bg.k.7000
@bg.k.7000 25 күн бұрын
As someone who is a glutton for punishment..... Since the quest 3 Hand Tracking is terrible, I bought a Leap motion 2 to see if that gets better results. I wonder if I need to install the Leap Motion on the quest as well as windows. RIght now the LM plugs into its own usb port, not the one on the quest 3. Anyone have any thoughts about this?
@tallymouse
@tallymouse 25 күн бұрын
@@bg.k.7000 are you using it HMD-mounted or desktop mounted?
@bg.k.7000
@bg.k.7000 25 күн бұрын
@@tallymouse HMD-Mounted. I would like to get a crystal, should of instead of the Quest 3. I only play pcvr type games, DCS/MSFS
@alessandrorenna7690
@alessandrorenna7690 29 күн бұрын
hello, great video, thanks for the app. I dont know if someone already told you but when the file settings.cfs is created by your app it is missing one line "vertical_fixed_offset=" which is something useful even for those that uses quest 3 or other with no eye tracking. Not big deal, I used your app and then edited the vertica offset because I like it a bit down. cheers
@tallymouse
@tallymouse 29 күн бұрын
@alessandrorenna7690 thanks! I will fix and update!
@alessandrorenna7690
@alessandrorenna7690 29 күн бұрын
@@tallymouse thanks mate
@iontesu2911
@iontesu2911 Ай бұрын
I have a an RTX 3080. I tried your settings for DCS. It’s perfect. My FPS jumped from 40-50 all the way to 71, I’m really happy. For MSFS not so much. With your MSFS settings I got 10FPS. Here are a few oddities. In your OpenXR settings (v1.3.2 same as mine) after Foveated Rendering setting (which I set as recommended to Custom) I don’t get the entry “Eye tracking” set to ON. I can see in the sim that eye tracking is ON. Just reporting it here just in case you recognize something stupid I did… Second issue is that in the MSFS VR settings for “Shaddow Maps” I can go only up to 2048 with my RTX3080. Your setting is 8192. So my question is are the MSFS settings really for 3080? Thank you for your help.
@tallymouse
@tallymouse Ай бұрын
@@iontesu2911 Google MSFS 4k shadows.. it's a setting in a config file.
@iontesu2911
@iontesu2911 29 күн бұрын
@@tallymouse what an incredible setting. At 4096, in my case, the MSFS FPS jumped to 40-50 depending on the flight. Over New York it's 40+. Looks great! Thank you again!!!
@iontesu2911
@iontesu2911 Ай бұрын
Excellent video, thank you. A quick question: is Quadviews necessary for MSFS as well? If so, are the settings shown for DCS applicable for MSFS for the 3080 case? I really appreciate your help.
@tallymouse
@tallymouse Ай бұрын
@@iontesu2911 quadviews only works with DCS and Pavlov, currently.
@Deinecraft
@Deinecraft Ай бұрын
You mentioned to activiate Eyetracking but the Crystal Light doenst have Eyetracking right?
@tallymouse
@tallymouse Ай бұрын
@@Deinecraft correct, but with eye tracking enabled, you can use QuadViews as a better form of FFR
@Panzerlang
@Panzerlang Ай бұрын
Out of stock for months and support has no date for resupply. Pimax couldn't organize a piss-up in a brewery and I won't be buying their Crystal Super.
@bg.k.7000
@bg.k.7000 25 күн бұрын
So who would you buy if not pimax? They seem to have the highest ppd.
@Panzerlang
@Panzerlang 25 күн бұрын
@bg.k.7000 somnium maybe.
@Panzerlang
@Panzerlang Ай бұрын
Today's message to Pimax support: "Hi. It's now over a year since I purchased the Crystal, with the option for the wide-FOV lenses. You have given me two dates for supply, both of which didn't happen. At this point I no longer believe you intend, or ever intended, to supply the promised items and consider you have engaged in fraud."
@juliantaffa4089
@juliantaffa4089 Ай бұрын
It looks like even a 4090 is a little underpowered for what the Crystal Light can really do, which is incredible. Hopefully the 50-series brings a whole new level of performance
@tallymouse
@tallymouse Ай бұрын
@juliantaffa4089 imagine what the Crystal Super is going to be like..😂 though eye-tracking and DFR will help a lot there!
@Chris85EBW
@Chris85EBW Ай бұрын
Thanks from Germany looks Good and fast ❤ Ryzen 5800X3D and RTX 4090❤
@keithbriscoe99
@keithbriscoe99 Ай бұрын
I just noticed there are no OpenXR settings here - were those left as default everything? No CAS for sharpening needed? or NIS for re-sizing? Turbo mode? Thx - - Mine is scheduled to arrive today!!
@tallymouse
@tallymouse Ай бұрын
@keithbriscoe99 Quadviews requires default OXRT settings.
@rogercox8228
@rogercox8228 Ай бұрын
Hey TM, after the latest DcS update today my quad views is extremely shaky everywhere I look? Is there an update coming or something I need to do? Was working great before
@michaelhaynes1850
@michaelhaynes1850 Ай бұрын
I have the same problem
@MedusaSquadron
@MedusaSquadron Ай бұрын
After last patch my visual under DCS is shaking continuosly where I look, as the foveted rendering show up where I look, any one has this problem? And how to fix it?
@tallymouse
@tallymouse Ай бұрын
@@MedusaSquadron Today's patch?
@MedusaSquadron
@MedusaSquadron Ай бұрын
@@tallymouse Yes, today's patch. It seems like where I look the Foveted Rendering start rendering the seer spot shaking like if I continuously make micro super fast movement...
@tallymouse
@tallymouse Ай бұрын
@@MedusaSquadron ok. Thanks. Will look into it. Have you checked what your vibration compensation setting in the OXRT OSD menu is set to?
@MedusaSquadron
@MedusaSquadron Ай бұрын
No, I will check it but yesterday all was OK, today I only updated, launched and so I didn't charge anything.
@MedusaSquadron
@MedusaSquadron Ай бұрын
It seems a Quad View bug..
@jakeperl5857
@jakeperl5857 Ай бұрын
I'm upgrading from the Rift S so I got BIG expectations
@voodoo7863
@voodoo7863 Ай бұрын
Let me know how that goes as my jump would be the same 😊
@jakeperl5857
@jakeperl5857 Ай бұрын
@@voodoo7863 mine probably will arrive sometime in September so I hope I can remember to haha
@jakeperl5857
@jakeperl5857 Ай бұрын
Thank you! This gives me hope I will do well with my 4070ti and i5-13600 when my Crystal Light arrives in 8 weeks or so...gonna be a long wait 🤪
@Panzerlang
@Panzerlang Ай бұрын
Thanks
@tallymouse
@tallymouse Ай бұрын
Wonderful! Thank you for your support!
@Panzerlang
@Panzerlang Ай бұрын
In a word, superb. :)
@peppetheking7
@peppetheking7 Ай бұрын
Can you help me with iracing settings please?
@skoVBA2
@skoVBA2 Ай бұрын
Ive been out of the game the last year or so. My reverb died so i got the crystal. Ive followed your tutorial on yt. I have an issue, when i click enable quadviews with the toolkit, my dcs launches but my headset stay in "home" mode, if i turn of quadviews it loads no problem. any solutions?
@wildbillkelso2083
@wildbillkelso2083 Ай бұрын
I used your video to rapidly set up a review kit. I took the liberty of mentioning you and placed a link to this page. I'm a fan. Keep at it please.
@Panzerlang
@Panzerlang Ай бұрын
I bought my Crystal in July of 2023 and opted for later delivery of the wide-FOV lenses and received my headset without the second pair of lenses that would otherwise have come with it. One year later and two delivery-date promises broken and these pimax scumbags have still not fulfilled the order. Spoke to their online support this morning and "No delivery date available at this time". I was warned about this cowboy company, eye-tracking is not working (I've been through EVERYTHING) and I will NEVER again purchase anything from them. They are LYING fraudsters.
@techinfusions
@techinfusions Ай бұрын
Think we need to see what the PSVR2 to PC adapter brings to the table, its a pure OLED headset with a resolution similar to the Reverb G2 but with a wider FOV so will not require a more expensive GPU and CPU upgrade to drive it, the Crystal Light will need a lot more processing power to fill those ultra hi resolution screens.
@jackr.749
@jackr.749 Ай бұрын
The problem with the PSVR2 to PCVR adaptor is most of the great features of the PSVR2 will be disabled including eye tracking making the PSVR2 just another plain jane VR HMD. :(
@techinfusions
@techinfusions Ай бұрын
@@jackr.749 There are no other OLED PCVR headsets out there under $1500, and the features you are talking about like DFR technology should not be needed for high end GPUs, Sony could also choose to add haptic and HDR support in the future if PCVR developers ask for it, I see the PSVR2 becoming the cheapest by far true PCVR headset with OLED displays.
@jackr.749
@jackr.749 Ай бұрын
@@techinfusions Agreed if you really want OLED, unfortunately, Sony went with Fresnel optics instead of either Pancake or Aspheric lenses. The Bigscreen Beyond is $1000 USA, but requires base stations and those kind of controller thus extra cost for those who don't have them, but it has micro OLED panels. I hope you are right about Sony enabling the features they killed off with the PCVR adapter if there is strong enough demand.
@Raffapifa
@Raffapifa Ай бұрын
Really in-depth review! Can't wait to try it
@Mr4NGRY
@Mr4NGRY Ай бұрын
Enable eye tracking on Crystal Light?
@tallymouse
@tallymouse Ай бұрын
It does not have eye-tracking, hence why it's inexpensive, however, you can trick QuadViews into working and use it as a very controllable/sophisticated FFR system.
@Mr4NGRY
@Mr4NGRY Ай бұрын
Ah I gotcha! I thought I heard you say to turn on eye tracking but couldn't figure out why 🤣 thank you!
@Tatsukoa808
@Tatsukoa808 Ай бұрын
What nVida drivers are you using in the video. The latest drivers don't have the same sharpening settings in the video just sharpen and a %.
@nickatgmail
@nickatgmail Ай бұрын
I’m seeing the same ‘Sharpen’ and %, and he did mention we might see this, but he did neglect to tell us what % to set.. should we set 25% to match the 0.25 setting that Tally mouse said?
@tallymouse
@tallymouse Ай бұрын
I think they moved it under image scaling.
@tallymouse
@tallymouse Ай бұрын
25%.. or 0.25.. may be found under image scaling in new driver
@nickatgmail
@nickatgmail Ай бұрын
@@tallymouse Luvyawork sir ;)
@strider00111
@strider00111 Ай бұрын
The crystal light does not have eye-tracking, or am I missing something?
@tallymouse
@tallymouse Ай бұрын
It does not have eye-tracking, hence why it's inexpensive, however, you cam trick QuadViews into working and use it as a very controllable/sophisticated FFR system.
@strider00111
@strider00111 Ай бұрын
@@tallymouse DCS 60fps with your settings, RTX 4080. 45 fps with msfs. Thanks for the tips!
@Crazy-Bear-Gamer-Channel
@Crazy-Bear-Gamer-Channel Ай бұрын
Hey man, I'm going to get mine (Pimax Crystal) probably within this week, (pc specs are really close to yours) is there something different I should do right now since your tutorial it's 8 month old, or I can just follow it exactly the same? thanks! :)
@tallymouse
@tallymouse Ай бұрын
I'll update it soon - but it still works fine!
@Crazy-Bear-Gamer-Channel
@Crazy-Bear-Gamer-Channel Ай бұрын
@@tallymouse thanks! :)
@Dronetothetop
@Dronetothetop Ай бұрын
I have the Reverb G2 and my question is, can you use Reverb G2's controller with Pimax Crystal Light?
@NWGJulian
@NWGJulian Ай бұрын
9:29 if I go 100% resolution and your settings with my 4070S, i get 10fps…
@xraycharli
@xraycharli Ай бұрын
my doughts about that video. 1. Crystal light does no have eye tracking and furthermore the OpenXR Toolkit does working together with the light version. Beside I saw only 10sec for update each single line as you open a line is not userfriendly. The light version works great (with RX4090 ) without any tweaking but it needs improvment on the driver due to problems on the tracking mode.
@Gaze73
@Gaze73 Ай бұрын
Pimax Crystal Light, Headset with Controllers TALLYMOUSE discount code isn’t valid for the items in your cart :( Why?
@nahemoth0843
@nahemoth0843 Ай бұрын
Great video! From what I understood, you don´t set any antialiasing option in DCS, just use the settings from the NVidia control panel, am I right? Did you notice any difference (performance or quality) compared to set MSAA in DCS options?
@tallymouse
@tallymouse Ай бұрын
Note that I am also using supersampling through QuadViews Companion in the Foveate region - so it's a bit like running MSAA over the central portion of the image only, so has better performance than running MSAA over the whole image.
@mayacakil
@mayacakil Ай бұрын
@@tallymouse Hi Tally, its a great video! Thank you for the Sharpening tip in Nvidia. I have quest3 and 4080. Only thing that bothers me is shimmering in MSAA. When you play online you can't use DLSS or DLAA due to spotting. Does Quadviews work with Quest3? Many thanks in advance. (In description it say : Works with Pimax Crystal, Pimax 12k, Quest Pro, and Varjo Aero, Varjo XR3.)
@Marcin79W
@Marcin79W Ай бұрын
All great, but these settings goes out of the window if one tries to play DCS for real, on some MP server or real mission with multiple units, not a free flight on Caucasus map that doesn't push CPU/GPU anywhere near to what we could have on more modern maps like Syria, or so. Thanks for the video.
@tallymouse
@tallymouse Ай бұрын
...but that could be said for any VR headset. I run my own server as I have discovered that many MP servers are run on low spec machines with asymmetric low bandwidth connections.
@Marcin79W
@Marcin79W Ай бұрын
@@tallymouse Yes, we could say that about any headset, I agree. It's just : when I see videos like this, it feels like it's not showing all the truth, no matter what headset. Many people could buy a headset based on what they see in the video and then be disappointed when trying to do more than just a free flight on Caucasus map. That's why I believe, videos like this one should also include a sample from busy and demanding DCS environment. Thank you for hearing me out, have a great time flying.
@tallymouse
@tallymouse Ай бұрын
@@Marcin79W I'll run my next video from a busy carrier deck, in the rain, on an MP server then..
@Marcin79W
@Marcin79W Ай бұрын
@@tallymouse Thank you for all the work you put there for us.
@chrisjung5952
@chrisjung5952 Ай бұрын
I had tried (and failed) many times to get DFR working, but your detailed instructions did the trick! I’m using your favorite settings from the companion app and DCS has never looked better or run smoother. Thanks so much for your hard work and supporting the community!!!
@autbo
@autbo Ай бұрын
Why is it when i use a Leap Motion 2 connected to the bottom of the Crystal it complains that it's a USB 2.0 port? It really affects the tracking quality. I would like to use the Leap Motion 2 that I already own.
@phillea708
@phillea708 2 ай бұрын
Will rtx 3060 GPU be OK, regards
@tallymouse
@tallymouse 2 ай бұрын
Yes - you'll be on the lower end of things, but it'll work. Remember that you can use OpenXR Toolkit to lower the effective resolution slightly and not notice much difference in quality. You can also do this in SteamVR, or in Pimax Play: setting "balanced" instead of "Maximum" resolution.