I finally got it setup, same as yours. Does your controller become hot? Is that normal? Mine is very hot to touch
@smartazz22 сағат бұрын
Yes. Try and keep it cool. Extra heat sink if you can will help.
@Jbogator17 сағат бұрын
@@smartazz ok, thanks
@ASTROEFEKTY7 күн бұрын
what about restoring/reseting phone?
@smartazz5 күн бұрын
If done before iOS 17.4.1 then your battery health will stay reset.
@cinelerraeasy8 күн бұрын
Could you tell me how the inverter behaves when it is night and the batteries are flat? Does the inverter consume energy from the grid?
@smartazz5 күн бұрын
It’s very good and economical and I can say I don’t even notice it running on my digital meter . Unlike the solis 3000 that seems to drain the battery even if you’re not using any power and I noticed a 10-50w power draw at night with a flat battery.
@cinelerraeasy5 күн бұрын
@@smartazz What do you recommend between Sofar 3000, Solis 3000 and Victron Multiplus 3000?
@jamo900013 күн бұрын
Hey Smart Azz, I'm using this and the password does not work and change to lvl 5 permissions for me. do you know if it has changed? I can read battery voltages but can not change anything else with only lvl 1 default permission. Thanks
@smartazz13 күн бұрын
New app it might be 000000000000
@jamo900013 күн бұрын
@@smartazz sadly doesn’t work and I don’t get any pop up message confirming a level change or any error when trying these passwords. Guess I need to source an android phone and use a different app.
@honestabe310014 күн бұрын
So, this is super helpful. Unfortunately for me, I only saw this after I did the battery swap myself. When I pulled out the old battery, I inadvertently ripped the ribbon cable going from the BSM to the connector. Is is possible to reconnect these two pieces?
@smartazz14 күн бұрын
Yea it is possible to reconnect but it will probably take more time and cost too much to repair economically and safely.
@honestabe310014 күн бұрын
Now we need to repair batteries! Thanks, Apple.
@500wattz24 күн бұрын
I gotta open mine. I have a QSmotor 205 i added statorade then after that things got funky. I keep getting phase current surge protect. Then power cuts out. Would a short cause this?
@smartazz24 күн бұрын
Quite possible.
@dtvking27 күн бұрын
Hiya Azz hope you're keeping well. Nice little gadget there. If you are interested I did come across a laptop battery tested in another YT the other day. It can reset any issue in the BMS, even if its locked out the battery. Don't think it's very cheap though, about £300-400 All the best mate
@smartazz26 күн бұрын
I’ll have to have a look. thanks . it’s a bit expensive but I’d love to check it out
@joaom819727 күн бұрын
Then they marvel when the mobile phones catch fire!!!! What's the point of all this bullshit?
@smartazz27 күн бұрын
No idea m8.
@blackrepairs5978Ай бұрын
Hi man, so I got this device and works really good. Just with iPhones on newest iOS, 17.4.1, it does not work. It stays on the old battery percentage, have you experienced this?
@smartazzАй бұрын
No I haven’t sorry. I will have to try it. I’ll let you know asap.
@smartazzАй бұрын
I have a xs max on 17.4.1 and JCID and Qianli not working :(
@TelevisionevАй бұрын
Sir can u tell me plz what is update batttery firmware on I phone ?
@smartazzАй бұрын
Hi sorry I don’t have the phone to check that information sorry.
@imranbashir5586Ай бұрын
Do you leave the tag on or can that be removed once the battery health is restored?
@smartazzАй бұрын
In this case you need to leave the tag on. You can do this job another way now, I’ll send the link.
How can I contact you? Maybe via email but which adress do I mail?
@G.M.C_ElectronicsАй бұрын
Its work?😊
@smartazzАй бұрын
Yes perfectly
@jasperwarmerdam5857Ай бұрын
Hello, i have almost the same bike. But mine is green and white. I was wondering if you could help me upgrade the bike. I would like to Unlock the bike from the max speed (25km/h) if you want to help me let me know how I can msg you!
@smartazzАй бұрын
Chatting on here is good ;) or we can email, I can advise parts or battery options and it might help other people if it’s on KZbin :)
@smartazzАй бұрын
.
@damoon5470Ай бұрын
Hi friend, Good contend, Nice job !! Can you tell me where I can buy this reset board please? I live in France, I don’t havé this around me
@smartazzАй бұрын
Iv got one for sale. It’s on ebay I’ll post the link tomorrow if you want. I can post to France no problem. It will be a auction listing :)
Is a battery repair cable always necessary when battery fit to the phone? Or It still work if remove it?
@smartazzАй бұрын
Full uncut iPhone 11 battery replacement 100% health reset battery warning message original BMS weld kzbin.info/www/bejne/pmjdlGSJppl9mrc
@smartazzАй бұрын
So the phone will work if you remove it but the health will be at the old level. The new video I just posted will show how to reset the battery health without the repair cable ;)
@asepd7159Ай бұрын
What board do you using sir? Is it qianli product or what? This is without changing tag-on and without copy battery original one?
@smartazzАй бұрын
I have a video coming out about it in detail soon. Keep the original BMS and reset it to 100% (no need tag on or any extra flex :)
@CrushyАй бұрын
Been looking at your videos for while, good content. Wondering if you can link me the board you use to modify the battery health Cheers
@smartazzАй бұрын
Where in the world are you ?
@CrushyАй бұрын
@@smartazz I’m in the uk as well
@smartazzАй бұрын
@@Crushy I’ll have one on eBay later today if you want one. I’ll also solder it up for you if you want ?
@Her0SpeedyАй бұрын
What is the thing that you used as other battery? to power the iphone when the original battery was out?
@smartazzАй бұрын
The board powers the phone with the connecting cable when the battery is connected with the board. My other battery is the spot welder battery.
@blackrepairs59782 ай бұрын
Whats the device called, and you prefer this over the programmers of like V1SE?
@smartazz2 ай бұрын
For doing this particular job right now this is the best tool to do it.
@smartazz2 ай бұрын
It’s a KC02 board I’ll do a more detailed video about it asap
@blackrepairs59782 ай бұрын
I have an iPhone that will keep showing the old data at 88%, I have tried connecting a different battery, rebooting and reconnecting the new battery with the transfered bms board again but to no avail. The new data won't show up whatever I do, have you come into this? I have done many replacements without issues with the same tag on. Thanks in advance for your reply
@smartazz2 ай бұрын
kzbin.info/www/bejne/g4GbnptsotF_r5Ysi=NQi74j0pZnP29i5l Check this video out. I believe it will fix your original BMS problem :)
@sparrowsends2 ай бұрын
Can you upload the seplos install please
@smartazz2 ай бұрын
I can upload the after install video if this will help ? It’s definitely a shoehorn job that’s for sure. But once in place it’s ok.
@sparrowsends2 ай бұрын
@smartazz that would be very much appreciated, as I've got the same battery and I'm trying to get it working with my sofar me 3000 .. it will give you legendary status in my eyes 🙏😂
@smartazz2 ай бұрын
@@sparrowsends ok I’ll try and go the extra mile and show the me3000sp working with this battery ;)
@sparrowsends2 ай бұрын
@smartazz words fail me of just how amazing that would be I've been struggling for a while now , I've almost been at a point of giving up until now , it's hard to explain how happy I'll be if I can get it working as I ain't got a clue .
@sparrowsends2 ай бұрын
@smartazz sorry to nag like a old woman but have you had a chance to do it , also can you include the can cable connection to the sofar and what battery setting you selected on the sofar please I.e pylon dafron thanks in advance
@smartazz2 ай бұрын
This is a better option kzbin.info/www/bejne/g4GbnptsotF_r5Ysi=WedVNN6Z-thPO0_S
@smartazz2 ай бұрын
This is a better option kzbin.info/www/bejne/g4GbnptsotF_r5Ysi=WedVNN6Z-thPO0_S
@smartazz2 ай бұрын
This is better kzbin.info/www/bejne/g4GbnptsotF_r5Ysi=RpKx_wtxTUndbwRE
@6layeronit2 ай бұрын
will this work on 11pro?
@smartazz2 ай бұрын
Yea absolutely
@DrGreenThumb1352 ай бұрын
Can I use a 96v 1500w controller on a 1000w hub motor or will it damage it?
@smartazz2 ай бұрын
It will work but for how long ??
@ehsansaidable2 ай бұрын
Thank you 👊
@smartazz2 ай бұрын
This is a better option kzbin.info/www/bejne/g4GbnptsotF_r5Ysi=WedVNN6Z-thPO0_S
@ElectronicSolution003 ай бұрын
Hello friend I need help. I have an ANT bms that locked my level 5 password and I don't remember it. Is there a possibility of erasing everything from the factory? my BMS is ANT 24ZHC-TB-17-24S-100A of manufacture 2022-12-10
@smartazz3 ай бұрын
Have you tried all the 0000s ? 13 of them.
@ElectronicSolution003 ай бұрын
@@smartazz Yes I have tried with the 12 zero and it doesn't work for me
@ElectronicSolution003 ай бұрын
What happened with this BMS was that a friend made some changes to those levels and he doesn't remember the password he put on my BMS and now it only has level 1 and I can't make changes. I can't find how to do a factory reset this BMS
@ElectronicSolution003 ай бұрын
Only level 1 with 00000000 works for me. 8 of them
@ElectronicSolution003 ай бұрын
@@smartazz level 5 only supports 12 digits
@Foxfried3 ай бұрын
Hey, these 280s will go down to about 265 and then stay there forever. I have seen some with like 300 cycles on them they are still doing 265
@KY13_WHO3 ай бұрын
Hi pal I need some help I have a Surron ebmx battery 72v57ah and I have turned the Bluetooth off in the Bms ant app settings is there anyway I can turn it back on
@smartazz3 ай бұрын
If it’s a Ant BMS you will probably need 3-5v to turn it back on.
@odoyewukobby72423 ай бұрын
Where will i get some that battery
@smartazz3 ай бұрын
+86 188 2343 2523 Lulu-Bizbee What’s app her and she will help you :)
@odoyewukobby72423 ай бұрын
@@smartazz ok
@hansjoachimvoigt10753 ай бұрын
Hello friends of the US2000C battery modules. The Voigt engineering office has succeeded in reading out all the required data from a module presented here with the aid of a PLC and thus making the data and parameters available for further applications. I think I will soon be able to say the same about the RS485 interface. I think I have thus enriched our community a little.
@smartazz3 ай бұрын
Awesome more information please
@hansjoachimvoigt10753 ай бұрын
Many hobbyists have offered solutions for visualising and storing battery data. Unfortunately, there is no way to use this data for other purposes. I use this US2000C for the power supply of a SERVO drive and constantly need to know how long I can move this vehicle module without recharging. For this I need this software that I have developed.
@bandodroneracingfpv94653 ай бұрын
hi mate u fitted LITTELFUSE SLD8S28A mine has SLD8S27a whats the difference.cheers
@smartazz3 ай бұрын
SLD8S27a is ESD Suppressors / TVS Diodes 27V 7kW UNI-DIR SLD8S AEC-Q101 SLD8S28A is ESD Suppressors / TVS Diodes 28V 7kW UNI-DIR SLD8S AEC-Q101 So apart from the 7 and the 8 been different there is no difference
@benjaminheale58564 ай бұрын
hi got one of these been connecting to it fine now cannot connect at all
@smartazz4 ай бұрын
What version have you got? Also have you updated the app or had a new phone ?
@cyanide26254 ай бұрын
10x6?
@ronigarcia16404 ай бұрын
Amigo..tenho uma preciso trocar os mosft só não sei os valores assim como os teus estão lixados.. sabe me dizer os nomes deles
@smartazz4 ай бұрын
Sorry I don’t know the names :(
@amrmansour49474 ай бұрын
does the motor got hot , i could burn if loaded I think
@smartazz4 ай бұрын
Yes it gets extremely hot and will burn if overloaded
@amrmansour49474 ай бұрын
@@smartazz wonderfull test you did :) , I wanted to run the hoverboard motor( 350W) on 60V to give more power but I think it will over heat , I also though of rewinding it for more power , But I see that the is no space in the stator to increase number of turns .
@smartazz4 ай бұрын
@@amrmansour4947 correct 👍
@ItzVincee4 ай бұрын
how many joules
@smartazz4 ай бұрын
I can’t remember the setting I used but I do know it was delivering 1440A per weld.
@Jbogator5 ай бұрын
How did the controller hold up long term with the 52v?
@smartazz5 ай бұрын
Still working perfectly well :)
@Jbogator5 ай бұрын
@@smartazz glad to hear it's still running well. I'll order the same controller and hook up a 52v pack. Thanks!
@meteor_vr91445 ай бұрын
i currently have a 1000w hub motor on my bike, what is your opinion on upgrading from 48v 30a to a 72v 50a. do you think the motor can take that much power? (after a controller upgrade as well.)
@smartazz5 ай бұрын
Do it lol. Your current controller will need replacement or you will most likely pop it with the higher voltage. The hub will take it but it will run hotter, you will need to monitor it constantly as you could burn it out. Let’s say you upgrade to a Kelly 7212s that will suck all the power from your battery and deliver it to the hub and put a massive smile on your face :) as long as your battery is good enough to deliver 300A for at least 20 seconds
@danielsegura34535 ай бұрын
Good video. Where you gets thats cells?
@smartazz5 ай бұрын
Fogstar wholesale Uk
@authentic42255 ай бұрын
3rd speed gets 10% than at full speed?
@smartazz5 ай бұрын
It’s difficult to say tbh. Usually it’s 50% 75% then 100% or as the manufacturer will say 110%
@authentic42255 ай бұрын
@@smartazz Better to go 110% if that is one gear lol
@pierce23935 ай бұрын
I want to make a 4 wheel drive cart using 4 swagtron motors do you think I need 4 controllers and 1 battery or could I get away with 1 controller?
@smartazz5 ай бұрын
I know you can buy 2 wheel drive controllers(I would buy 2) but the problem with 1 Controler is if any wheel goes out of sink it will not work properly or act as a brake.
@Aaronthearsonist5 ай бұрын
If you don’t connect the hall and put all the motors in parallel you should be fine however make sure that the total amount of wattage of all 4 motors adds up correctly to the controller output
@Damian-Church-NZ6 ай бұрын
🤣😂✌️🙌
@yoyatech6 ай бұрын
does it still worth it until now?, whats the pros and cons?
@smartazz6 ай бұрын
Cons ,Back tyre is worn down fast Pros It was fun building it 😂
@yoyatech6 ай бұрын
@@smartazz sir, is it worth it to make this for 5km back and forth everyday?
@smartazz6 ай бұрын
@@yoyatech with the right battery yes ;)
@yoyatech6 ай бұрын
@@smartazz thanks, i'll try
@yoyatech6 ай бұрын
Sir, i really wanted to done this project but rn i think something else, instead of mounting the bldc into the tire why not mount the bldc directly into the road, this should increase the efficiency, what do you think?, i need your advice about this (i'll mount it in the middle, and the bldc directly run on the road)