7 жыл бұрын
Пікірлер
@Blueflesh4 20 күн бұрын
Man, I have this going on at 10:18 , but mine hoes pop, pip, pop, pop, like a pulse. Had the game outside for a few years in the back porch.. mice moved in. Ugh.
@AttractionSpot 21 күн бұрын
How do I replace these if one is broken?
@arcaderepairtips 14 күн бұрын
If your potentiometer is broken, you just need to find a replacement with the same value, desolder/remove the broken pot from the board, and insert/solder the new pot. You can find replacement potentiometers and other parts from many of the suppliers listed under the Arcade Parts Suppliers & Distributors heading on our Resources page at www.arcaderepairtips.com/resources/. Hope that helps.
@BWellek Ай бұрын
I0 I have a 2007 Las Vegas slot machine can I switch it from tokens to the quarters
@arcaderepairtips Ай бұрын
On most slot machines, it’s just a matter of either adjusting or replacing the coin mech. Here's a link that should give you a bit more information: bit.ly/pachislo-token-quarter We will also be covering your question on our Live Show Episode 93. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/gajJkpasgKaSeK8
@therexershow Ай бұрын
I put my Mortal Kombat 2 on the sidewalk , was a huge hit.
@TheCloser-i4s Ай бұрын
can you please tell me how to lower the volume. I have a ms pac man but i think the board is a replacement board meaning it was another game before but I really want to know how to turn down the volume. Its too loud
@arcaderepairtips Ай бұрын
On original Pac-Man/Ms. Pac-Man game boards, there is usually a volume potentiometer located just below the heatsink in the top right of the PCB (when you have the board oriented with the edge connector on top). Adjusting this pot should control the volume. If the pot does not work, check that the value is changing when it is adjusted. Now, it’s possible that you have a bootleg game board that does not have a volume control on it. In this case, you can install your own volume potentiometer between the game board and the speaker. See our post/video on Assembling A Cocktail Cabinet Kit (With JAMMA Wiring Harness) (kzbin.info/www/bejne/pnjMhIVpjMysiLcsi=cSFGMkyhEuto47MP&t=1403) for more information. We will also be covering your question on our Live Show Episode 93. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/gajJkpasgKaSeK8
@Vinnigarage Ай бұрын
I have a question. I got an 80s rush’n attack video game. And I need to know how to wire the power mogul. It’s like 8 single wires. And I have no clue how they go back on the power mogul
@arcaderepairtips Ай бұрын
Not quite sure what you mean by power mogul. Can you send us some pictures of the inside of your cabinet so we can get a better idea of your setup? You can email them to [email protected]. Thanks!
@g4715 Ай бұрын
Where is the video on keys n locks
@arcaderepairtips Ай бұрын
Check out our post/video on Replacing A Coin Door Lock: www.arcaderepairtips.com/2009/07/28/replacing-a-coin-door-lock/ Hope that helps.
@BWellek Ай бұрын
I want to change my slot machine 2007 pictures low from tokens to quarters how do I do that
@arcaderepairtips Ай бұрын
So, we are assuming that by saying "pictures low" you mean Pachislo. On most Pachislo machines, it’s just a matter of either adjusting or replacing the coin mech. Here's a link that should give you a bit more information: bit.ly/pachislo-token-quarter We will also be covering your question on our Live Show Episode 93. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/gajJkpasgKaSeK8
@NotYoMamas Ай бұрын
Hey guys, glad to see you fellas in action! Stan
@trentepic 2 ай бұрын
Hey y’all! Really been enjoying your show! I am so glad you get to do this! Thank you! Been trying to catch after show lately also(used to only listen via Spotify) love it! Thanks again!
@joeholt7578 2 ай бұрын
Loving Tim's Adventure shirt. That game felt infinite back then. Lol
@BScott7220 2 ай бұрын
Hey guys this is Brandon (monitor issues). Thank you so much for taking the time to address my question! I probably should have given a bit more info. It's a brand-new Viewlix machine that was unfortunately damaged during shipping. I did in fact run a VGA from the JAMMA Board to an old PC monitor I had lying around - and it looked great with no squiggly lines, only clean resolution. So it appears to be a monitor issue, the one that came with the setup. I will try your advice to AutoAdjust and see what happens - thanks again!
@KatRollo 2 ай бұрын
39:55 OMG, didn't realise my question actually made it in an episode, thanks guys! I'm vastly familiar with console emulation, but arcade emulation tends to be trickier. 😅 Found myself in your channel again because I needed a refresher on DIP switches. I was using FBNeo back then which also had the option to modify hard DIP switches. I'm thinking of moving to MAME now because it's easier to match romset versions. I'm also using the ARCADE64 UI which I recognise from the slide you made. Thanks again!
@heathercorinne5876 2 ай бұрын
Hey guys...thanks for using my story. It's still a mystery! That day my boyfriend said looks like the grim reaper's pick ax hit it. I also texted my friend who isn't in any "woowoo" stuff and the 1st thing she said was, "sage the house." Then we remembered my brother and his girlfriend slept in that room once and she said, she saw a man standing next to the bed, thought it was my brother but he was still in bed. We brushed that off at the time. Mom DID confirm a male occupant passed in that home prior to them owning it. Maybe we should sage the house or call Ghostbusters. Thanks guys! Well done!
@djshaggy167 2 ай бұрын
video kinda fuzzy and too far away to see clearly what you are doing
@RyanMeade-ep9qb 3 ай бұрын
What about a TAITO cocktail to jamma?
@arcaderepairtips 2 ай бұрын
So, the easiest solution would be to use a Taito Classic Cabinet to JAMMA PCB Adapter. This would allow you to preserve the current wiring in your game while still giving you the ability to swap JAMMA boards in as you wish. Here's a link to one that's sold by Arcadeshop: www.arcadeshop.com/i/1776/taito-classic-cabinet-to-jamma-pcb-adapter.htm We will also be covering your question on our Live Show Episode 92. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/iWOzhHdvlLGYhNk Hope that helps.
@troyhonda71 3 ай бұрын
Great show! Alot of monitor issues. Thank you!
@DJDanceClassic 3 ай бұрын
Can you please show me #280 TETRIS 1P ?
@arcaderepairtips 2 ай бұрын
We believe the 412-in-1 board uses the Atari Tetris cocktail ROM for that selection, but only allows player 1 to play the game for some reason. Hope that helps
@pixnstix 3 ай бұрын
As to Horizontal Collapse, I have a Gorf standup game. Every now and then, while playing, the sides of the screen will start to pull inward a few times, and then it pulls in to a full horizontal collapse, with just a vertical line from top to bottom. I have slapped the side of the cabinet and sometimes caused the vertical line to open back up to an open screen and the horizontal collapse goes away. Also, there have been times where the background sound will go out, but the sounds of the shots and explosions will still work. Then later, the background sound will return. It really depends on the day I turn on the game. Some days there are no problems, other times I get the issues noted above. What can be done? Thanks.
@arcaderepairtips 3 ай бұрын
@pixnstix The random collapse you are experiencing sounds like a monitor issue. Since you can slap the side of the cabinet and make it go away, it would seem to be caused by cold, cracked, and/or broken solder joints. Remove the chassis and touch up the solder on all joints in the vertical section. See our post on Repairing Monitor Collapse Issues (www.arcaderepairtips.com/2011/04/07/repairing-monitor-collapse-issues/) for more info. Of course, might install a cap kit as well while you have the chassis removed from your cabinet. The background sound issue would seem to be more of a board issue. Check the connection between audio board and the game board along with the audio amp for cold solder joints. We will also be covering your question on our Live Show Episode 91. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/aGbOd4OGpLqhl5I
@pixnstix 3 ай бұрын
@@arcaderepairtips Thank you! I'll give it a shot.
@OneLovePsych 4 ай бұрын
14 years later these tips are still working! All these older cabinet videos I’ve found to be A LOT of help!
@andrewgoulson 4 ай бұрын
Is there a video explaing what replacing the "hot" is? Thanks!
@arcaderepairtips 3 ай бұрын
The HOT is the Horizontal Output Transistor. If you need help identifying where the HOT is located on your monitor chassis, send some pics of your chassis (or the make/model of your chassis if you know it) to [email protected] and we can help you find it. If you are looking for a video explaining a bit more about the HOT, our Volume 2 DVD has an extended cut of this video (Troubleshooting Games That Are Playing Blind) that shows more detail about this repair. The DVD also has a bonus video on Checking The Horizontal Output Transistor that discusses how to test them. You can get our Volume 2 DVD from our online store at www.arcaderepairtips.com/store/
@TonieHyde 4 ай бұрын
Thrilling experience
@oneinchbiceps 4 ай бұрын
Could there of been a Earthquake reported in Florida at the time they were gone?
@MrAlexthemachine 4 ай бұрын
You’re the man! Thank you 🙏 been watching you guys for years now.
@BrewersArcade 4 ай бұрын
Still enjoy the show!!🤘
@Omega_Mark 4 ай бұрын
It's possible to top wasn't perfectly flat either due to manufacturing defects or not being sturdy enough when people moved it and held by the top portion. The thing then could be misaligned and held by a constant stress by the clips until it popped. If this thing wasn't sturdy, the leg levelers could be misaligned, further putting stress on the glass. It also comes down to how thick the glass was. Things are not liked they used to be. Probably a thinner piece of glass, more prone to breakage.
@Omega_Mark 4 ай бұрын
Mischievous racoons? lol
@HorrorRod 4 ай бұрын
random ball bearing bounced out of overhead door?
@currentphonograph7487 4 ай бұрын
Perhaps she has squatters
@flightofapaullo72 4 ай бұрын
Cheers from California! 🤙🏼
@utubepunk 4 ай бұрын
A new upload? What year is it?!? Lol. Glad to see it!
@Gendo3s2k 4 ай бұрын
1:01:09 I turned the flyback all the way up, and there is a very light ghost image. I'll recheck everything again when i get home in a few hours...
@FN3234 4 ай бұрын
Do you do cap replacements on monitors?
@arcaderepairtips 4 ай бұрын
Unfortunately, we are not taking any monitor repairs at this time, but we do have several people we recommend. Chad at arcadecup.com is a very reputable guy and has a pretty fast turnaround time. You could also contact our friend Paul at paulsmonitors.com. He has answered several questions on our Facebook page in the past and definitely knows what he's doing. There is a list of additional monitor repair technicians on our resources page at www.arcaderepairtips.com/resources/ under the Monitor Repair Services & Information heading as well. Hope that helps.
@aky4300 5 ай бұрын
i'm gonna start being an arcade tech after deadpool comes out!!! i'm literally squealing like a little girl, i'm so excited!!!
@krillen18 5 ай бұрын
Thank you guys I worked at an arcade and bar as an arcade tech and recently got a random old standing cab with a 60in1 and the original game board I wanna see if that og board works! This helped greatly
@tonyapool1117 5 ай бұрын
Can you help with Namco 25th Anniversary edition 1981-2005. I have sound but no video
@arcaderepairtips 4 ай бұрын
Sounds like a classic case of playing blind. Check out our post on Troubleshooting Games That Are Playing Blind (www.arcaderepairtips.com/2012/05/14/troubleshooting-games-that-are-playing-blind/) for more info on the repair. We will also be covering your question on our Live Show Episode 90. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/qorCfZ6gi7t1qdU
@Gendo3s2k 5 ай бұрын
12 year old video, but .. Whatever lol In my case, the monitor was working fine, until i moved there cab to a new location. Now it plays blind. I do have neck glow. Checked all of the connections to make sure nothing came loose, and it's all Guten-tite... Any ideas?
@arcaderepairtips 4 ай бұрын
Since you recently moved the cabinet and the monitor stopped working, there’s a good chance that you are having a connection issue of some sort. We would definitely recommend checking all of the connections again especially the monitor input and power wires to ensure these are all connected properly. Now, there is a chance that moving the game jostled something on the monitor chassis and caused it to stop working. In this case, check out our post on Troubleshooting Games That Are Playing Blind (www.arcaderepairtips.com/2012/05/14/troubleshooting-games-that-are-playing-blind/) for more info on the repair. We will also be covering your question on our Live Show Episode 90. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/qorCfZ6gi7t1qdU
@johnlaspisa2711 5 ай бұрын
Guys! Help....I have the WSOD and no sound. I have power from PSU and power to the molex at the the main PCB. All fuses are good. I don't know what to check next.
@arcaderepairtips 4 ай бұрын
From your description, it sounds like the main PCB / game board may not be working properly. I know you said you have power to the board. Have you checked it at the board with a multimeter? Also, what is the name of the game that is having this issue? Let us know and we can try to help you out further. Thanks.
@johnlaspisa2711 4 ай бұрын
@@arcaderepairtips solved: there was a ribbon cable that connects the main board to a daughter card that was barely loose. The game is World Series "The Season" It's weird how it got loose b/c the machine hasn't been moved in quite some time...maybe heat / cold expansion and contraction???
@cylotron 5 ай бұрын
That panel for adjusting the display settings was moved right behind the coin door in front on the Arcade Legends 2 machine I picked up recently. I'm in the process of upgrading the joysticks and buttons... but all of a sudden, the display itself has shifted over to the right (it is partially cut off now). I've tried twisting the different knobs. Am able to raise/lower the display, mess with brightness/contrast, raise/lower the display... but for whatever reason, no matter which knob I adjust.. I cannot get the picture to re-center again properly. I may have to open up the back and see if there are any more knobs/adjustments I can make back there. what a pain!
@arcaderepairtips 5 ай бұрын
So, you should see “some” change when you are turning the adjustments on the “break-out” adjustment board. If you are not, then it could mean that you have a connection issue between the main monitor chassis and the adjustment board OR that the potentiometers on the board are not working properly. Turn off your game and check these items to see if it helps the problem. If the “break-out” adjustment board is hooked up and the pots are working properly, then you may have an issue with your monitor chassis. Let us know the make and model of your monitor chassis and we'll try to help you out further. Hope that helps. We will also be covering your question on our Live Show Episode 89. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/sJu9dK2re7Kjnck
@cylotron 5 ай бұрын
@@arcaderepairtips Thank you for the reply! It is a Chicago Gaming Co "Arcade Legends 2" machine from 2007. I just had it open recently replacing some button switches that went bad. the "adjustment board" in it allows you to adjust the display brightness, contrast, v position, h position, etc... but no matter how I tinker with it, the display is still off center. I looked inside the back, around the monitor PCB but did not find any other adjustment knobs anywhere.
@arcaderepairtips 5 ай бұрын
@@cylotron You might try turning off the game. Unhooking the connector from the remote adjustment board, hooking it back and, and see if that helps. Again, sometimes a bad connection between the adjustment board and the main chassis can cause this issue. You might also try disconnecting the input wires from the monitor chassis and reconnecting them (while the game is powered off) as well. If the picture is still shifted after that, we need to see if we can get some more information about the monitor. You can send a picture of the back of your monitor to us via email at [email protected] if you need additional help.
@andrewgoulson 5 ай бұрын
Fantastic video. I learned a ton!
@arcaderepairtips 4 ай бұрын
Awesome! Thanks for the feedback. Glad that our content was able to inform you!
@roccov1972 5 ай бұрын
Good video. Can I suggest you gentleman consider using lavalier mics? You sound like you're recording the audio in a bathroom. Just saying. Thanks.
@arcaderepairtips 4 ай бұрын
Thanks for the feedback. You are correct. Definitely sounds pretty echo-y. We have started using lavalier and shotgun mics in most of our recent content to help with this. Your comment reminds us of how far we've come!
@StevesRetroGaming 6 ай бұрын
YES, I could fix the Joystick issue in less than a minute, hehehe.
@dariosoto6919 6 ай бұрын
How Can o Reset a password
@arcaderepairtips 5 ай бұрын
It depends on the system. If it's a PC-based arcade board with a BIOS password, you can try the methods suggested in this link: www.wikihow.com/Reset-a-BIOS-Password. Let us know the arcade game or what type of system you have, and we can try to help you out further. Hope that helps.
@dariosoto6919 5 ай бұрын
@@arcaderepairtips yea it is a of base with windows
@dariosoto6919 5 ай бұрын
@@arcaderepairtips the password is in the arcade software . It don’t let me get into the setting it has a password
@arcaderepairtips 5 ай бұрын
@@dariosoto6919 What's the name of the game? Thanks.
@mikethepickypicker8011 6 ай бұрын
Great video! Now to go find a 12 inch LED light strip. Thank you!
@arcaderepairtips 5 ай бұрын
Yeah. Unfortunately, Amazon no longer sells this particular LED strip. With that said, the process should be the same for most LED strips. We now use the Hyper Tough 700 Lumen 12" LED Under Cabinet Light which is available at most Walmart locations. Price should be around $15. Product Link: bit.ly/ht-led-marquee-light We will also be covering your question on our Live Show Episode 89. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/sJu9dK2re7Kjnck
@therexershow 6 ай бұрын
Great show. Following up to my question, the guy I bought the board from said to send it back and he would look at it. He plugged it in and said it worked for him at 4.7 V. He said in the post he wrote “runs best at 4.7v”. (I didn’t see that ) so he tested and said it’s fine. I just got it back today so I will test again.
@oscillationcommunications709 6 ай бұрын
Nice! You guys ROCK.🤘🏻
@arcaderepairtips 4 ай бұрын
Thank you. We think you ROCK too!
@krillen18 6 ай бұрын
Do you need to wire a monitor to the jamma harness in order to get video?
@arcaderepairtips 5 ай бұрын
It depends. If your game board has a VGA/video output, then you may be able to hook up your monitor to that instead of going through the JAMMA harness. Otherwise, you will need to connect to the JAMMA harness in order to get video. Hope that helps We will also be covering your question on our Live Show Episode 89. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/sJu9dK2re7Kjnck
@roccov1972 6 ай бұрын
Good video. Just wish it was shot in HD so we could see everything better. Thanks!
@arcaderepairtips 4 ай бұрын
Thank you for the feedback. Yeah, this video is definitely showing its age now! Just FYI, we did release an extended cut of this on our Volume 2 DVD that shows some additional steps. We also think the quality is a bit better on the DVD version as well. You can find it in our online store at www.arcaderepairtips.com/store/ if you're interested. Thanks for watching!
@joshuacissell1823 7 ай бұрын
I know ita an old video but ill take any advice i can get. I jave a House of the Dead 1 with 2 Happ guns. They work fine for probably firat half of the game then start going wonky. Completely off grid. A restart of the game (power off/on) will fix it? What is wrong?
@arcaderepairtips 6 ай бұрын
Seems more like a power or game board issue since the problem occurs with both light guns at the same time. Try checking the voltage when the light guns start going “wonky” to see if it’s still within range. Check the connections on the I/O board to make sure it’s connected properly to the light guns and the main board. If you continue to have issues after trying these suggestions, you might try contacting Ken at irepairsega.com as he as a lot of experience with Sega games in general. We will also be covering your question on our Live Show Episode 88. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/oYHEhJigjLeqqdE
@GenZod80 7 ай бұрын
Hey guys, thank you for answering my question. Regarding the cabinet, yeah I did remove control deck & cabinet still won’t fit through the door hence the downsizing I have to do. Will look into using the current connector and hopefully still works. I’ll email you the completed project when done. Thank you again