Arcade Repair Tips - Assembling A Cocktail Cabinet Kit v2 (With JAMMA Wiring Harness) - UPDATED 2021

[@John-ow6zk]

More videos!!! Yes!!! I just got into the hobby a little over a year ago and listen to the podcast monthly. I’ve bought one of the dvd sets in the past. I always miss the live show because my work schedule but always listen the next day. Thank you so much for what you guys are doing! You are doing the lords work! Hello from Bangor Maine!

[@grevier22]

For anyone interested: 3:14 Unboxing 5:03 Step 1 11:36 Step 2 12:35 Step 3 13:18 Step 4 13:43 Step 5 14:24 Step 6 14:53 Step 7-9 15:34 Step 10 16:12 Step 11 17:12 Step 12-14 17:53 Step 15 18:25 Step 16 18:53 AC Power 20:32 DC Power 22:48 Mounting 23:23 Sound 24:31 Test/Service 25:04 CP Wiring 25:55 Joystick 27:51 Controls 29:43 CP Wiring 33:18 Monitor 34:21 Bezel 34:58 Plexiglass Top 36:10 Upgrades

[@arcaderepairtips]

Thank you for doing this. We have added your breakdown as chapters in the video. Awesome work.

[@grevier22]

@@arcaderepairtips so cool! Thanks! If i see another vid could use em ill add them! I needed the CP wiring and so after trying to find it decided maybe making the stamps for others.

[@cwalker3783]

I wish you would make a video about multimeters. Which brand, type and price. I don't want to break the bank either. A tutorial would be nice to.

[@jasonrichmeier32]

I had to pick one up not too long ago to troubleshoot an issue with my Ms. Pacman/Galaga cabinet. I got this one at Lowe's for around $30 (not sure what your budget is): www.lowes.com/pd/Kobalt-Electrical-Test-Kit/5001926987 It has done everything demonstrated in the video as part of the cocktail cabinet build.

[@cwalker3783]

@@jasonrichmeier32 I just bought a used Fluke 23, made in USA on eBay for $75

[@utubepunk]

Now in high definition!

[@roundtablecook]

Hello. I have an original table top style Tiger Heli arcade game. It works great but after about 10-15 minutes the screen flips 180 degrees, any idea what would be causing that? Thanks.

[@arcaderepairtips]

Tabletop/cocktail games typically flip the screen when it’s the second player’s turn. If you want to turn this off, you can set DIP switch 4 on bank A to the OFF position. There is also a DIP switch for screen orientation that may need to be changed as well. You can find more DIP switch settings for Tiger Heli in the manual for the game: www.aurcade.com/games/manuals/00001687.pdf We will also be covering your question on our Live Show Episode 82. Here's a link to the episode if you want to watch it: kzbin.info/www/bejne/lZTGm4Kro6Zoi7c

[@azrabain8210]

Do you still repair CRT arcade monitor?

[@arcaderepairtips]

Unfortunately, we are not taking any monitor repairs at this time, but we do have several people we recommend. Our friend Paul at paulsmonitors.com has been doing repairs for over a decade and has a lot of experience with most of the common monitor models. He has answered several questions on our Facebook page in the past and definitely knows what he's doing. Chad at arcadecup.com is also a very reputable guy and has a pretty fast turnaround time. There is a list of additional monitor repair technicians on our resources page (www.arcaderepairtips.com/resources) under the Monitor Repair Services & Information heading as well. Hope that helps.

[@azrabain8210]

Thank you for the recommendation’s. I will contact them once I get my settlement for the repair. I would rather pay a couple hundred to repair mine then try and find another monitor that would probably cost me a good amount more.

[@petermurphy7735]

My astroids deluxe is getting fuzzy on one side any ideas ?

[@arcaderepairtips]

It could be a focus or a convergence issue. Try adjusting the focus adjustment to see if it helps. You may also need to modify the yoke/rings on the tube as well. Check out our posts on monitor convergence on our website for more information. If you have any additional questions, you can reply back to this comment or join us for our Live Show Episode 75 on Thursday, May 4, 2023 at 5:30 PM CT on KZbin as we will be covering your question during the show. Here's a link to the episode if you want to watch it live: kzbin.info/www/bejne/jHmYip2Xr9ZlhtE. It will also be available as a recording at the same link if you are not able to watch it during the live feed. Thank you for your question and good luck with your repair.

[@StellarArcades]

The on off switch was included?

[@arcaderepairtips]

Yes, the on/off switch is included in this kit. Thanks for watching!

[@StellarArcades]

@arcaderepairtips I either threw mine away by mistake when I got rid of the box or mine didn't come with one. Do you have any recommendations on what type of on-off switch I should use?

[@arcaderepairtips]

@@StellarArcadesTry contacting the Holland Computers support team and see if they will replace it for you. Here is a link to the switch based on the part number inventory for the kit: www.hollandcomputers.com/store/pc/Power-EMI-Filter-with-Built-In-Power-Switch-with-fuse-by-RetroArcade-us-2512p5988.htm?idaffiliate=38

[@StellarArcades]

@@arcaderepairtips thanks I'll do just that

[@StellarArcades]

@@arcaderepairtips thank you for the information about the on off switch. i ran into another problem though, while trying to extend the ground wire to reach across the cabinet for player 2. I, while the cabinet was unplugged and off, cut the daisy chained black ground wire shorter so it would reach player 1 and planned to use the extra wire to splice the ground in the middle together to get the leads to reach player 2 across the cabinet. however i found that when i plugged the cabinet back in my 60 in 1 was now blinking red and orange instead of green and i no longer had a picture. when i spliced it back in its original place the board still blinked red and orange. did i fry my board? did i ruin the jamma harness? any thoughts on this would help my frustration thank you very much.

[@encorempw]

Neato

[@utubepunk]

2021 edition? 🤔

[@arcaderepairtips]

Yes, Holland Computers started shipping this updated kit to customers in Fall 2021. So, even though this video is being released in 2022, the kit is still referred to as the 2021 edition.

[@sadsatan7168]

🙉🙉