I just opened my battery for when my replacement comes, but I noticed the ebike company that gave me mine has put rubber sealant around each side of the battery cells. Any idea of how to remove it?
@Greenbikekit4 сағат бұрын
Hello, use a knife to cut it carefully. We build our batteries also use the silicone GEL to seal the cells for safety reason.
@gonadman2Күн бұрын
How to remove the motor winding from the motor case?
@pixelatedmushroom2 күн бұрын
now how about removing the stator 😊
@Greenbikekit2 күн бұрын
😅we have not got an easy way to remove the stator so far
@pikoliii2 күн бұрын
Hey, love your videos :) DId you by any chance get by M820? I would love to see a teardown and see the reparability of this motor. :)
@Greenbikekit2 күн бұрын
We will upload videos for M820 motor in one or two weeks
@pikoliiiКүн бұрын
@@Greenbikekit great, tnx! What is the spare parts availability for M820? So far, I was not able to find any spares on your site. Will it improve in the futur? Tnx
@magzire4 күн бұрын
The older 1000w HD version is way quieter, what's gives?
@Greenbikekit3 күн бұрын
The new gear for M620 is quieter
@pixelatedmushroom8 күн бұрын
Too bad it's impossible to calibrate without tools that nobody sells...
@Greenbikekit7 күн бұрын
We sell the calibrateion tool. You can order on www.greenbikekit.com
@mpz854514 күн бұрын
i do not Authorize device and no operation permission
@Greenbikekit14 күн бұрын
Please try another mobile. By the way, once you bind the bms on a mobile, you need to unbind it if you want to use another mobile to set the BMS, in other words, one BMS can only bind one mobile, if you change the mobile, you need to unbind the bms first, then change to another mobile and bind it.
@Phantom-ebike21 күн бұрын
I have one of these on order for my bike. Could you do a review of your's with audio for us all?
@Greenbikekit20 күн бұрын
We will try later
@Phantom-ebike4 күн бұрын
Thanks!
@hunter820221 күн бұрын
I don't see so many settings in a parameter, why?
@z_man645023 күн бұрын
This is a joke. Useless.
@JimmyJoeJrАй бұрын
Where are the replacement bearings made?
@GreenbikekitАй бұрын
China
@A.G_369Ай бұрын
What difference does it make in movement, is the speed greater or the traction stronger?
@GreenbikekitАй бұрын
traction stronger
@roncooke2188Ай бұрын
This guy is very quiet spoken
@rossg9363Ай бұрын
my Bafang m620 motor has started playing up. it says "error 10" (over heat code) in the first kilometre of every ride and i touch the motor all over and its cold and its in a limp mode! would changing the controller fix this problem? i swapped a display from another bafang uart m620 i own and its not the display because the same code came up on the display. if you can answer my question i would really appreciate it thanks.
@GreenbikekitАй бұрын
Did you use 52V battery for 48V motor?
@rossg9363Ай бұрын
@@Greenbikekit no 48v motor and dual 48v batteries.
@GreenbikekitАй бұрын
@@rossg9363 temp sensor would be defective, the temp ensor is built in the stator
@rossg9363Ай бұрын
@@Greenbikekit i thought "error 11" was faulty temperature sensor?
@marceldagenais1893Ай бұрын
Can you use the B type in the A motor if you swap the bearing out
@GreenbikekitАй бұрын
No, unless you also change the stator
@marceldagenais1893Ай бұрын
@@Greenbikekit California e bikes sells the B with the 24mm bearing and they add a spacer check out the video.
prob used no copyright music then they flipped the switch
@jokermtb2 ай бұрын
geez, only one dust seal keeping that PCB free of water and grit......yikes.
@Greenbikekit2 ай бұрын
yes
@amatvictoriacuram90042 ай бұрын
Can or Uart protocol M420
@Greenbikekit2 ай бұрын
UART and CAN is the same way to replace the controller, the only difference is CANbus motor needs calibration with besst tool
@skateboardingjesus40062 ай бұрын
Nice video. You should do one about how to replace the ratchet rings on different bafang motors, because they're very prone to wearing down. I had to do mine on the M300.
@Greenbikekit2 ай бұрын
We have M300 pawl clutch replacement video, you can check on our channel
@skateboardingjesus40062 ай бұрын
@@Greenbikekit I know, I saw it. It's a good video. I'm talking about the ratchet ring that the pawl clutch connects with when you turn the pedals. They can be very hard to take off and replace.
@Greenbikekit2 ай бұрын
@@skateboardingjesus4006 yes, they are hard to remove and replace, therefore, we have to replace the whole pawl clutch
@shakyhandpictures21852 ай бұрын
Do you do service work? Can I ship you motors for repairs?
@Greenbikekit2 ай бұрын
Hello, we don't recommend because the freight is too high. You can send us email for your questions, and we will try to help you to find out what the problem is.
@alhassanekamara42682 ай бұрын
I wash my bafang bike since then the bike is off, it is on only when it is on charger and shows 100 percent but when you remove the charger the bike goes off immediatelly i dont know what to do can someone help? please!!
@Greenbikekit2 ай бұрын
What's the voltage of the battery? Probably the battery's problem. You can try another battery to test your bike.
@alhassanekamara42682 ай бұрын
@@Greenbikekit The voltage is 48v /14Ah/672Wh
@Greenbikekit2 ай бұрын
@@alhassanekamara4268 Please check the battery voltage after disconnecting the charger after the battery is off.
@alhassanekamara42682 ай бұрын
@@Greenbikekit It is 48 volt
@The_Unobtainium2 ай бұрын
But new version has 15 teeth pinion, old one 9 teeth. So how can they be interchangeable??
@Greenbikekit2 ай бұрын
You need to replace the third steel gear. The third steel gear is compatible with the rotor.
@aadmonk3 ай бұрын
I am curious ,when reassembling how much preload /torque do you put on the center shaft nuts? Is it just enough to take the slack out of the thrust bearings and get a smooth rotation?
@Greenbikekit2 ай бұрын
not 100% tightened, just enough to take the slack out of the thrust bearings and get a smooth rotation
@aadmonk2 ай бұрын
@@Greenbikekit Thanks for the reply.
@shakyhandpictures21853 ай бұрын
If you owned a bike with a M620 you’re surely going to need one of those!
@joeybakker63293 ай бұрын
Hi Greenbike, thanks for this video. It's perfect! Is calibration with a tool (like the 'besst' tool) needed after installing a new one?
@Greenbikekit3 ай бұрын
If your M420 motor is CANbus motor, then you need to calibrate the motor with Besst tool; if your motor is UART motor, then you don't need to calibrate it with besst tool.
@a.r.mohapatra33913 ай бұрын
I'll request others to subscribe to this channel for knowledge, as it's very close to monetization and needs just 100 more subscribers to get paid for his dedicated effort.....❤ your work
@n.a.37343 ай бұрын
👏👏👏🏆🤑🤑🤑
@n.a.37343 ай бұрын
What is canbus & art??! Pls
@unclejohn50123 ай бұрын
Need to do videos on them under load. Are these upgrade parts or parts that you use on older style motors to get them to rhe same as new motors?
@Greenbikekit3 ай бұрын
New motor with upgraded gear and rotor ordered directly from Bafang
@JanKowalski-sy4zh3 ай бұрын
The new gearbox is available from mid-2023
@howardthomas38623 ай бұрын
how can i disable pedal assist and have throttle only would just unpluging it work?
@Greenbikekit3 ай бұрын
In this case, the motor would not work. You can set PAS=0 in your display
@paulselwood43013 ай бұрын
Guy in this video doesn't replace the locking ring on the superior pinion,which should be replaced above the granny gear,before replacing the cover.Had my bbso2 16 months and after replacing 2 nylon granny gears,ended up upgrading to a metal granny gear,and a cut out when you change gears.Never looked back since.
@arrowstheorem18814 ай бұрын
No YT video found for : What if the key is lost and key lock barrel component is housed separately such that when the top cover four screws are removed, the key lock barrel component is residing in a separate compartment housed in plastic cover adjacent to the main plastic casing? And battery is slided into the battery holder bracket of the ebike?
@Greenbikekit3 ай бұрын
probably violate the mounting base, then remove the battery, replace a new key lock and buy a new mounting base
@carlodemichelli22384 ай бұрын
Hi, is 5 pin male suitable for 2 pin female? If so, what functionality would i loose?
@Greenbikekit4 ай бұрын
Some factory use the small pins for battery communication; if your battery has no communication function, then just ignore the small pins
@saib82354 ай бұрын
Where do you plug the 2 connectors of the torqimue sensor?
@Greenbikekit4 ай бұрын
The controller has matching connector for the torque sensor
@jonathanmendes98084 ай бұрын
What is the name of the third one?😊
@Greenbikekit4 ай бұрын
it is the Hailong 4 pins connector
@terryscott1094 ай бұрын
Hi if it's possible to see a vid a bafang m410 tear down please
@Greenbikekit4 ай бұрын
we will upload m410 in the coming weeks
@Greenbikekit3 ай бұрын
Hello, the M410 video has uploaded, you can check now😀
@ApolloWoodwork4 ай бұрын
great vid i have the besst tool where do i get a username and password
@Greenbikekit4 ай бұрын
Please contact your besst tool supplier.
@bergmanst5 ай бұрын
Do you sell the Cadence Sensors for the G510 Bafang Motor
@Greenbikekit4 ай бұрын
yes, we also sell G510 torque sensor, you can check from here www.greenbikekit.com/electric-motor-engine/ultra-g510-mid-motor-parts/bafang-ultra-motor-torque-sensor-m620.html
@liammcgirr17785 ай бұрын
Does anywhere in the UK do this kind of work? My heads battered watching it
@Greenbikekit5 ай бұрын
You can replace the gear easily
@westongraham20715 ай бұрын
Does a CANBUS M620 also need to be recalibrated after replacing rotor
@Greenbikekit5 ай бұрын
Yes, you need Bafang Besst tool to calibrate the motor; there is other tool for calibration in the market too.
@milesmarioni56135 ай бұрын
Need Bafang’s repair shop in SF Bay Area?
@Greenbikekit5 ай бұрын
Hello, we have videos for all the parts replacement. You can check them all; please feel free to email us if you have other questions: [email protected]
@shakyhandpictures21855 ай бұрын
Are these gears available as replacements? I have a new motor that literally screams with less than 2000 kms on it. I am truly not satisfied and I paid 1200.$ for the damn thing+ plus tax!
@Greenbikekit5 ай бұрын
Yes, you can buy the rotor and gear on our website. Rotor: www.greenbikekit.com/electric-motor-engine/ultra-g510-mid-motor-parts/bafang-m620-g510-motor-rotor.html gear:www.greenbikekit.com/electric-motor-engine/ultra-g510-mid-motor-parts/ultra-steel-gear-bearing-for-replacement.html By the way, you need to calibrate the motor after replacing them. We also have calibration tool.
@endu25995 ай бұрын
Dostroiłem mojego Bafanga kablem z Aliexpress. Po przejechaniu 50 km zgasł i od tego czasu się nie włączył. Czy wiesz, co to może być?
@Greenbikekit5 ай бұрын
Which cable? If the battery, the display and EB-BUS cable are in good condition, consider the controller defective
@endu25995 ай бұрын
Do you have experience troubleshooting Bafang engines?
@vincefaranda82325 ай бұрын
Sorry , for a m400
@Greenbikekit5 ай бұрын
We have M400 controllers, there are two versions M400 controller, CANbus and UART, you can order directly on our website if you need the controller www.greenbikekit.com/electric-motor-engine/bafang-max-drive-m400-g330-parts/bafang-max-drive-m400-g330-motor-controller.html
@Greenbikekit5 ай бұрын
You can check the cost on our website
@vincefaranda82325 ай бұрын
Does anyone know how much a new controller is ??
@ApolloWoodwork5 ай бұрын
can i put a UART controller on a CAN BUS motor or vise versa
@Greenbikekit5 ай бұрын
You also need to replace the torque sensor, speed sensor, EB-BUS cable and the display