Tools Tech And Gear

Пікірлер

@filipbieleckiify 5 күн бұрын

I have been using Worx 20V tools for years. Previously I used all Dewalt tools. Unfortunately the drill broke down and I went to the store to have it serviced and buy another one but without the battery. Unfortunately it was not possible (I would have had to buy the whole set and spend a fortune). So I bought Worx to replace Dewalt for the time of repair. I quickly noticed that Worx works no worse than Dewalt and costs less than half the price. I can buy the tools I want without the battery which is why I sold the whole Dewalt set and bought everything Worx, I have been working like this for years and it was a very good decision.

@leeannmclaughlin8734 7 күн бұрын

Hey any idea why we are getting no signal on the monitor? We have just unboxed it, plugged power cable and hdmi cable in no signal then changed it to DP cable and still no signal?

@saifulalam4845 9 күн бұрын

Very good. I got information from your video. I have brought two light. I will install in my house. Thank you.

@emancipatedminds9526 10 күн бұрын

Brought one and the hammer when within a month, I returned it and got it replaced at pricesmart and the hammer went again in 3 months

@WeasleFireable 10 күн бұрын

Amazing video, fixed the issue for me completely and I didn't need an extended cable or signal reducers.

@dexter8962 11 күн бұрын

Worst Gaming monitor

@emel7341 11 күн бұрын

Does the monitor have speakers or do I have to get them separate

@dbukgg8928 Күн бұрын

Seperate

@ImperatorMundi1 15 күн бұрын

Hi. Do 4 pin worx battery fit in this tool too?

@terrenceturner3895 15 күн бұрын

Thank you so much for teaching me my machine

@73superglide62 16 күн бұрын

Im big space you leaving guessing Bud

@jerryhewlett740 16 күн бұрын

I really like the two that I have

@MaverickMave-k6v 17 күн бұрын

Is it work with stainless steel ?

@Applecider-Poetry 19 күн бұрын

you can also do this with a pencil

@dez5 21 күн бұрын

Love it.

@EnricoZenitani 21 күн бұрын

I wasn't getting a buzz but there was just a ton of background noise from recording and this solved the issue instantly. Thank you so much!

@tdelgado1949 22 күн бұрын

Very helpful

@robinsmith1534 24 күн бұрын

Don’t want to see u open boxes. And explain better for those not techie

@AuldHowker 24 күн бұрын

so you did not need a ground to neutral adapter? Means appliance not earthed when plugged into Bluetti

@mojituti 25 күн бұрын

I have the exact same, but under the brand name Dovaman. I think they had a name change... ???

@Sylvan_dB 26 күн бұрын

Sometimes it can be convenient to position the bottom shelf high enough for totes or other storage to go on the floor underneath. It's like a free shelf!

@ToolsTechAndGear 26 күн бұрын

That's true! But with the 3D printers going in this shelf unit I had to position the shelves in this exact setup.

@royreynolds108 26 күн бұрын

Depends on the use and what goes on the shelves.

@wit-solar Ай бұрын

We manufacture and export high quality solar lights solar panels.

@3ls222 Ай бұрын

great video bro

@PafMedic Ай бұрын

Appreciate The Video,The One Im Getting Has A Door On Either End

@RINGOTVReactions Ай бұрын

I know this is an old video at the same time thanks for your review of this light. Your video helped in my buying choice for a full Lighting setup. I'm getting two of the 660, two CB60B lights with soft boxes and 4 of the newer wall arms shown in your video. Also, I'm ordering the soft boxes for the 660 lights. Newer has a sale going so I'm getting my lighting setup for my new KZbin show that I will have on another channel.

@tongvang724 Ай бұрын

Why would you need 2? Wouldnt one work just fine? Connect directly from main router and into the barn?

@ToolsTechAndGear Ай бұрын

The two bridge talk to each other. They don't talk to routers outside of the ethernet cable. You have to have the pair.

@johnmerton3630 Ай бұрын

bloody hell ---too hard

@PDXBeach Ай бұрын

What port on the router do. You need to plug in the LAN cable>?

@SuburbanFarmer96 Ай бұрын

just a heads up your video is being used on the amazon page for this by both the company and someone else

@ToolsTechAndGear Ай бұрын

Thank you for that. I believe I did give the company permission to use the video in their marketing.

@Rubenac Ай бұрын

Does the night light reflect off of the wood to produce the ring pattern? I’m looking to install these in an exposed ceiling room and it won’t have Sheetrock or wood to project the light back at

@robertyezek6822 Ай бұрын

inspection failed 2 wires under 1 lug

@joka7370 Ай бұрын

Very informative video as always,what about a speed test between the bridge units? Thanks and keep up the good work👍🏻

@chasmarischen4459 Ай бұрын

Good video, thanks.

@WayneTheBoatGuy Ай бұрын

Well done!

@JoesKidsChannel Ай бұрын

Thanks so much for this! You deserve a hero award.

@301247ivan Ай бұрын

Excellent video. Explain everything about U70. You don't even have to read user manual. Thanks.

@marksalvetti4894 Ай бұрын

Has anyone measured the inside clear dimension of the bed when the cover is tilted all the way up.? Looking to use a mountain bike tailgate pad and need to know true inside dimension. Thanks in advance.

@TheDjeezus Ай бұрын

But is the slave emitting wifi? Or do you always have to connect via Ethernet at the shed?

@TheDjeezus Ай бұрын

Or should I connect a router to the slave to have wifi?

@KevinMaxwell-o3t Ай бұрын

@@TheDjeezus As he mentioned in the video, you have a choice. You can connect your laptop to the slave unit via an ethernet cable, or instead plug a wireless router into it. I think just about everyone would go the wireless router route. Mine cost just $40 and sure gets the job done.

@bartholomeoblundell5772 2 ай бұрын

Thanks for the video , one question . Can the table saw be used without the trolley ? I mean can it be used on a table and be fixed mounted on that table ? Thanks

@ToolsTechAndGear Ай бұрын

Yes you can take the saw off the base and use it on a table.

@bartholomeoblundell5772 Ай бұрын

@@ToolsTechAndGear That's great thanks

@ericchang9568 2 ай бұрын

This dispenser design is garbage - I cut my fingers multiple times and the bottom metal plate kept sticking to the tape. The older design worked but 3M cheapen this so much that it's totally unusable now.