Appreciate this video a lot. The other ones I’ve found weren’t getting to the darn point. Works great I’m getting a slight fluctuation in decimals but nothing that would cause lights to flicker. I ended using the previous ignition wire which I believe is the blue coming out of that harness. Bolted the ext voltage reg on the alternator. We will see if it’s too much heat for it.

Do you think this would fit in a g35 with a 5.3?

God bless this man!! I am having an IDENTICAL issue with my LS swap and for the ones wondering the part number info its acdelco 217-1588 just go to any parts store and tell them part number 217-1588 injector O rings bypass all the what year make or model. Just wanted to say thank you Gonzo's Garage your getting a mention in my up coming video! God bless brother!

Where is the finished product

hey i have a 2007 mitsubishi raider with the 3.7l and 42rle, if i was to swap an ls & 4l80 what needs to be done to the differential??

This didn’t fix my problem and I know my alternator is good. Now what do i do.

What’s the part number on these

Mine just came in for my 79 elco I went thru Holley came within 3days

be sure to vac fill the cooling system to get ride of any trapped air

I can get a good deal on an ls7 short block, I already have ls3 heads and complete intake. Would the heads bolt on and would I lose that much power in using those instead of ls7 heads and intake? Also would I need to worry about piston to valve clearance because of the different valve angle? Thanks

Just ordered me a pair bc I am facing the same issues with clearance with the steering column myself.. they come in Saturday should have an update by Monday. Thanks for the video.

Appreciate it man. I noticed it being slimy when I changed the thermostat and still had the same issue. I'll try this tomorrow

Is it a gen 3 motor ?

Can I run these pistons on a gen 3 5.3 and stock piston rods

Have you had any issues with these? I've had mine for a while and the flange on both side leaks like crazy

There's actually two thermostats inside that thermostat housing. One is a low temp. T-Stat that's actually for the heater core. Haven't talked to anybody else who knows this.That's one of the things that should be considered when somebody's getting into this. Also, all the factory HOAT coolant needs to be flushed out. Its reacting with the aluminum from the engine causing sludge to build up in the heater core and restricting, or completely blocking coolant flow. Just use typical universal antifreeze. Just a suggestion.

I'm Sold... But not till spring lol

Thanks for the video.

How’d this turbo work out for you ? Thinking about ordering one

Im having the same issue 2010 2.7l sebring. I just replaced the thermostat but still very little heat and coolant is coming out of the overflow while running. Is there a solution you can run through to remove the gunk and then flush and refill?

Will those manifolds work on a 5.3 in a S10?

Just ordered a set today 🙌. Great video! Thanks for the info!

My 2012 chrsyler 200s. Heat had all tbese problem. And I have found the heat works the best on circulate. Cuz mine barely does any heat even after flush. Just make sure u turn the ac off when u hit the circulate button

UPDATE ! Chrysler 200 fix. Totally drain and flush the cooling system. DO NOT USE HOAT ANTIFREEZE AGAIN. EVER. The antifreeze is the problem. Switch to prestone OAT antifreeze and put a antifreeze coolant fliter inline with the heater hose going to the intake side of the heater core. This will fix this very common problem when Hoat antifreeze interacts negatively with cyclinder heads and or cooling system componets. Chrysler will not state this, but i will. Remember stay away from HOAT type antifreeze.

Tks great job

Can the stock 5.3 cam used with the flat top piston I see 221 on my cam

im using those MFers on my 63 C10

Man you made that like very doable since a shop has a wait time and not to easy on my wallet and I can't wait as my truck is my dump truck for Roofing and I have to get back to work, so much thanks

That's my problem.

Do I just keep the stock manifolds then?

Great video I went and purchased the O-rings just wondering did you happen to use the stock retainer clips that are on the stock LS motor?

I need help!!!! My chrysler isnt making a clicking or knocking sounds, its actually hard to describe the sound that it is actually making. The noise is driving me nuts!!!!!! My heat is also not working. Single mom here with two boys, could someone help me out?!

What song is this?

Bought the JEGS sheet metal intake for ls1 and had 60lb injectors . It came with the JEGS fuel rails and once I put my injectors it leaked . Had no issues with the ls6 intake and Holley efi fuel rails . I found part 217-1588 gm O -Rings and also 217-1533?? Which should I get ? They both baby blue and brown O rings

I'm pretty sure this is the only video that details how the different fluids flow through the cooler. Finally, thank you.

Are those truck injectors I have problems with my brackets onto the fuel rail I don’t want to drill nd fabricate brackets would the spacers work

What about a 91 w250 360 LA gas engine?.. key switch on gas can go off the ignition coil...I went the old way with older alternator not charging much ...wonder if I have to use the original alternator?.

I did a LS swap into a 78 Buick Regal. I am going to run a Procharger. It's street/strip. I'm researching headers now. I am thinking of shortys vs. long tube. The passengers side was the problem when I ran long tubes with a SBC in it. Concerned about the swap because I don't think any companies guarantee a fit. Would shortys loose allot of power with my procharger D1X? Curious about anyone's thoughts on this. Car been down for over 2 years and I want to get it up ASAP.

How do i find out where to find the key switch twelve volt on my car.

Where did you get the o ring from need help

Unfortunately you will have to do it every year tii you deal with th prob...learned from experience on 2013 200

Are you using these for a 5.3 or a 4.8?

No more videos on the 4.8 dakota

Sweet

Got a part number for that AC compressor line adapter

You just save me like 3 hours worth I never even knew fuse buddies existed

Can u send me ur email or I send mine to get more info been wanting to get my dodge Dakota running since I was in 6th grade I’ve now graduated and I’m college and think it’s time to put a LS motor in it I want ur email so I can get ur number and we can talk how u did it so it’ll be easier for me

I know you said you work a regular job is the build still in progress or is it done nice build

Had a voltage regulator installed. Should both wires be hot going into the voltage regulator? Or just one wire