Just the tip: 1 ebay fuel rail leak fix

  Рет қаралды 9,542

Gonzo's Garage

Gonzo's Garage

Күн бұрын

Пікірлер: 31
@JamesDguy
@JamesDguy 4 ай бұрын
God bless this man!! I am having an IDENTICAL issue with my LS swap and for the ones wondering the part number info its acdelco 217-1588 just go to any parts store and tell them part number 217-1588 injector O rings bypass all the what year make or model. Just wanted to say thank you Gonzo's Garage your getting a mention in my up coming video! God bless brother!
@BillyP-49Chevy
@BillyP-49Chevy 4 ай бұрын
Thank you very much sir.
@drstallings_314
@drstallings_314 2 ай бұрын
Is this with the stock injectors? Or aftermarket?
@joshsbluecollarbuildsdesig7427
@joshsbluecollarbuildsdesig7427 Жыл бұрын
Great video I went and purchased the O-rings just wondering did you happen to use the stock retainer clips that are on the stock LS motor?
@GonzosGarage
@GonzosGarage Жыл бұрын
No. Those things go in the trash every time. I hate those things
@GbodySS_LsX
@GbodySS_LsX Жыл бұрын
Are those truck injectors I have problems with my brackets onto the fuel rail I don’t want to drill nd fabricate brackets would the spacers work
@ramonochoa5262
@ramonochoa5262 8 ай бұрын
The spacers work but you’d also need different o rings because that’s why I’m on this video to start with, I’m leaking fuel from spacer tip to the fuel rail
@JohnReynolds661
@JohnReynolds661 Жыл бұрын
So far, the only place I found the bigger O ring is from Rock Auto. Victor Reinz 181003101 Inside dia = .291", outside dia = .585", thickness = .148" It's not clear if these are Viton rubber. Local parts stores only carry Felpro which isn't big enough.
@wilperroreyes7390
@wilperroreyes7390 Ай бұрын
Do you have a part number for the orings you used or dimensions of the diameters?
@xXBlownReaperXx
@xXBlownReaperXx Жыл бұрын
Bought the JEGS sheet metal intake for ls1 and had 60lb injectors . It came with the JEGS fuel rails and once I put my injectors it leaked . Had no issues with the ls6 intake and Holley efi fuel rails . I found part 217-1588 gm O -Rings and also 217-1533?? Which should I get ? They both baby blue and brown O rings
@GonzosGarage
@GonzosGarage Жыл бұрын
I used acdelo 217-1588 from the parts store
@GonzosGarage
@GonzosGarage Жыл бұрын
I looked them up on a 2001 ls1 camaro
@xXBlownReaperXx
@xXBlownReaperXx Жыл бұрын
Thank you very much, I have a 99 firebird formula with a 6.0 I will order and hopefully fix this issue
@athinelongatedgoblin9411
@athinelongatedgoblin9411 Ай бұрын
@@xXBlownReaperXxdid it fix ur issue?
@xXBlownReaperXx
@xXBlownReaperXx Ай бұрын
@@athinelongatedgoblin9411 yea
@regdor8187
@regdor8187 Жыл бұрын
O-rings have a p/n such as 2-N374 etc. ..what was the p/n of those you used ??
@angelobyrd8010
@angelobyrd8010 3 жыл бұрын
Okay that's what you did I didn't have the money to go buy new ones new o-rings but what I did was took old o-rings and stuck them up in the top of the fuel rail to give it that extra like quarter of an inch or whatever and that stopped the leak is that a good idea or am I f****** up
@GonzosGarage
@GonzosGarage 3 жыл бұрын
Well it's not the proper way to fix it but if it works... it works. The only question now is it gonna last and is it putting to much pressure vertically on the injector body. The injector isn't suppose to have vertical pressure on the injector body because it can cause the injector to fail. The injector should rotate left and right freely when installed to insure the injector body isn't being crushed
@jralvarez79
@jralvarez79 Жыл бұрын
You know the part# on the o-rings you used? Thanks
@angelobyrd8010
@angelobyrd8010 3 жыл бұрын
Okay so maybe it's not a good idea but only reason now I'm saying that is because I started the car up and it began to shutter misfire and cut off immediately and I'm wondering if that o ring that extra o ring could be causing the fuel not to get to the injector efficiently
@GonzosGarage
@GonzosGarage 3 жыл бұрын
At that point the extra o ring most likely is smashing inward and restricting fuel flow.
@GonzosGarage
@GonzosGarage 3 жыл бұрын
Did u upgrade injectors to a larger or smaller injector? If so the tune is probably off and needs to be retuned
@cliffjamerson3107
@cliffjamerson3107 Жыл бұрын
Thanks bro
@jamesking425
@jamesking425 Жыл бұрын
Where did you get the o ring from need help
@GonzosGarage
@GonzosGarage Жыл бұрын
Went to oriellys and had the look up injector o rings for a 2000 ss camaro then picked the ones that are the blue o rings
@bryangee9609
@bryangee9609 2 жыл бұрын
Are those factory LS injectors ?
@GonzosGarage
@GonzosGarage 2 жыл бұрын
Yes
@armedgunman01
@armedgunman01 2 жыл бұрын
Not all gm injector orings are the same they very in size slightly, most people don't know that, you just had bad luck and had the wrong size to start with
@GonzosGarage
@GonzosGarage 2 жыл бұрын
I agree. And every time I get some of these cheap fuel rails showing up on someone's new build that leak... the blue ones from the local parts store never fail me. So it's gotten to the point I start with those if I'm upgrading rails and injectors on something.
@zachcote7304
@zachcote7304 Жыл бұрын
Do you know the size?
@brihan24
@brihan24 Жыл бұрын
@@GonzosGarage what are the dimesions?
Fabricated Sheet Metal Intake Manifolds - Should YOU Get One?
16:22
In The Shop TV
Рет қаралды 6 М.
Ebay LS Front Accessories w/Truck Spacing
20:28
EssMotorsports
Рет қаралды 4,4 М.
Хасанның өзі эфирге шықты! “Қылмыстық топқа қатысым жоқ” дейді. Талғарда не болды? Халық сене ме?
09:25
Демократиялы Қазақстан / Демократический Казахстан
Рет қаралды 357 М.
бабл ти гель для душа // Eva mash
01:00
EVA mash
Рет қаралды 4,1 МЛН
Ouch.. 🤕⚽️
00:25
Celine Dept
Рет қаралды 29 МЛН
Oil Consumption issue, pcv system fail GM V8
13:06
CrazedPerformanceRepair
Рет қаралды 344 М.
SDPC Tech Tips: Fuel Rail Plumbing
5:01
Scoggin-Dickey Parts Center
Рет қаралды 11 М.
LS INJECTORS - DeCapping, Rebuilding, Cleaning - TURBO 5.3 Pt. 14
6:33
Direct Injection, Problems and Solutions | The Fine Print
19:25
savagegeese
Рет қаралды 2,1 МЛН
Duramax Fuel rail leaks! Lets fix it
13:26
Lokeys Garage
Рет қаралды 9 М.
LET'S TALK TECH-WHY DO PEOPLE INSIST ON USING THIS INTAKE?
1:16:12
Richard Holdener
Рет қаралды 47 М.
Włoski ogier na bramkach #camion #camionista #camionisti
0:16
Milion Kilometrów
Рет қаралды 2,7 МЛН
We install the auxiliary340.8K ... air suspension on Renault Master X70
0:37
Best Mechanics Around the World
Рет қаралды 14 МЛН
Hãy đợi đấy #bmx #strider #race #ander
0:10
Alex TX
Рет қаралды 3 МЛН
Be Careful when buying a used car
0:18
Exotic Rubber
Рет қаралды 24 МЛН
thật đơn giản
0:36
Điện Máy Quốc Doanh
Рет қаралды 9 МЛН
ЭТО ЧЁ ТАКОЕ? ПОМЫЛИ МАШИНУ 🚘😂🤣
0:18
ShortsVoronin
Рет қаралды 3,4 МЛН