MEMELORD JORD

Пікірлер

@chrisasaurus Ай бұрын

Too much talking, video all over the place .....but that's pretty dope you emulated the sti sounds

@jajadrift7399 Ай бұрын

Great video

@jajadrift7399 Ай бұрын

Wenor😂

@Walle-hi2en 2 ай бұрын

DIY Subaru

@TonyTunesENT 2 ай бұрын

just to be clear. you ran the coolant feed (left hand side of turbo) to under the throttle body and the return (right hand side of turbo) to where the top radiator hose connects? I was thinking about cutting the radiator hose and using a sensor housing for that. Any help is appreciated, thanks

@MemelordJord 2 ай бұрын

Correct. Here’s an updated video that might answer some of your questions. I don’t know for certain if i have I have it going to the correct sides of the turbo, I just ran it how i have it. kzbin.info/www/bejne/qGrLpox5lpWUfpI

@TonyTunesENT 2 ай бұрын

@@MemelordJord right on, appreciate it. I assume me using a sensor housing between the actual radiator hose would work the same way. Maybe a tad bit less flow of water than that large hose you're using. What you think?

@MemelordJord 2 ай бұрын

I don’t see why that wouldn’t work

@alirose9881 2 ай бұрын

When you want a wrx but dont want wrx unreliability.

@PatrickHemmes 3 ай бұрын

I couldn't hear what you were saying in the last bit due to the wind, but how does the baseplate fit? since I thought the rake angle is different on the sedan compared to the coupe.

@ecstasy92 3 ай бұрын

This is so cool man. I love the dedication to this idea and making it a reality. Not to mention the little details to the car like the hood scoop, “Cloutback” and mudflaps you added to really tie the Hondaru build together. This is insane!

@static_Tricolor_camry 4 ай бұрын

I would just gut the entire interior back seats, headliner, door panels. Leave the flooring carpeting in, and only have the Front driver side seat and Front passenger seat with the dashboard and center console only.

@MaXpeedingRodsCoopYT 4 ай бұрын

how dm email ?

@gabrieldavenport1395 4 ай бұрын

1320 has just released a uel turbo manifold

@RootBeer-n1t 4 ай бұрын

BRING THE STI CIVIC BACK

@thadarkone5087 4 ай бұрын

hey bro did you do a vid on the ignition Coils Conversion ??? link if you did plz TY

@MemelordJord 4 ай бұрын

@@thadarkone5087 i will be making a video explaining everything i can about the coil on plug conversion once i get my car running again and sorted

@Knownworldwide 4 ай бұрын

I too prefer the OE manifold. I have been on the fence about boosting my S13. I like that you painted it black. Looks good. Not sure if you’re still active in the comments but what FPR are you running?

@MemelordJord 4 ай бұрын

@@Knownworldwide I’m using the radium fpr that bolts to the end of the radium fuel rail

@Knownworldwide 4 ай бұрын

@@MemelordJord Thanks. It looked like that but I wanted to be sure. Hopefully you can get a new motor up and running for your car man.

@0Esplorativo0 4 ай бұрын

Its not Orbit Z. It is Orbit MX.

@endii33 5 ай бұрын

i love it!!! what colour is? Maybe Silbergrau A08??

@BernsteinOmega 5 ай бұрын

Such a proper Zilvia spec interior. I dig it! 👌

@danielmorris5470 5 ай бұрын

bros the master of blowing up engines

@sircapalott 5 ай бұрын

anyone got a current link to these??

@rishishetty6559 3 ай бұрын

@PatrickHemmes 3 ай бұрын

@1jzhatch113 6 ай бұрын

Wheel specs

@MemelordJord 6 ай бұрын

I don’t know the exact offsets off the top of my head but they’re mid disk faces with 4.5” lips in front with 5.5” lips in the rear

@henrynewgent8481 6 ай бұрын

been building a simialr car and watching your videos periodically and this is the first time ive see the whole car. It looks amazing. Assembling my fully built kat car in 2 days

@jboxfpv3303 6 ай бұрын

Bro sorry that happened, I’ve randomly watched your videos and seeing this I was ready to watch this rip. Hopefully it gets going soon!

@sethbelcher800 6 ай бұрын

any tips on painting and mounting sideskirts and lips ??

@MemelordJord 6 ай бұрын

I mount my bumpers with one ziptie on each corner, and for the side skirts i use 2 rivnuts in the door jam and one on the quarter panel. I actually have a spare kit order, i can make a video showing how i get that fitted up, mounted and painted

@sethbelcher800 6 ай бұрын

@@MemelordJord please do i’ve got a chuki slash 180sx skirt kit rear valance and some lips for the front but im nervous on mounting them i’ve got a rivet gun so i wanna use that.

@G_Ozare 6 ай бұрын

Deja Vú. Lfgooo!

@satyavratadas1640 6 ай бұрын

Tomei cams in a KAT we built back in 2015 still running perfect till this day just a thought for you and your build

@erikdude666 6 ай бұрын

japan or usa? lol

@MemelordJord 6 ай бұрын

There’s A LOT of people who have broken tomei usa cams. But there’s a lot of people who haven’t broken them either but i can’t afford to take that gamble with this next engine. Especially with how many times those cams have come in and out of engines

@MemelordJord 6 ай бұрын

Tomei japan and Tomei usa are in no way related to each other, and Tomei japan doesn’t make anything for ka’s

@erikdude666 6 ай бұрын

@@MemelordJord Didn’t Tomei JP do the RND for the S14 KA-T kit?

@arspec 6 ай бұрын

Bro just start with another motor I’ve had my Kat for 6 years now bone stock and it’s been pushing 18psi putting down 300wheel and I’m at every event

@skinnyslide 6 ай бұрын

hey man ive had a similar experienceto yours with a built ka, between bad parts and bad machine work and stupid mistakes on my part multiple rebuilds not lasting 100 miles i was very close giving up on the ka but went after it again with a vergin block and crank and 10 years later i have had my built ka in my car a few months now running great and loving it dont give up on it also the engine needs some heavy load put on it durring break in to seat the rings propperly

@JBO1sk 6 ай бұрын

Dopest ka on KZbin

@RCsROCK20 6 ай бұрын

Wait till u see mine soon gonna be spicy

@suchracing 6 ай бұрын

gotta be one of my favourite s14s. it'll be worth it in the long run.

@kishiisded 6 ай бұрын

race kor jord

@joejoe240sx 6 ай бұрын

Great video I’m doing this next 6 months..how’s the she drive! ? Did you use an oem throw out bearing?

@MemelordJord 6 ай бұрын

It drove very well, just like before the swap. I used the throwout bearing from my ka transmission

@agentmike45 6 ай бұрын

Thanks for the video! Really helps as I've had a hard time trying to find a cage that fits sunroof models. This helped in knowing what to trim. Side note, is that a custom rear seat delete? Looks great.

@MemelordJord 6 ай бұрын

The rear seat delete is made by street faction!

@jojir6 6 ай бұрын

just got me a s14 and this is what im trying to go for

@bisooyeong 7 ай бұрын

Do you have t51r mod or no?? Would love to get that spool sound on mine

@MemelordJord 7 ай бұрын

The GTX3071R does come with t51r mod from garrett

@bisooyeong 7 ай бұрын

Where did you get yours from bro?? I’m going with nice time racing kit cause of your video!

@chewysmoker4204 7 ай бұрын

How did u do the hood scoop that's dope

@FlightsimGODD 7 ай бұрын

Damn this shit really do sound like a subie

@Cgtlfa 7 ай бұрын

How the KA-T holding up? Still have my KA virgin stock since it’s been so reliable but eventually… I wanna go your route

@MemelordJord 7 ай бұрын

I haven’t gotten to try it out yet really because of more engine problems

@chiquisbaby81 7 ай бұрын

Dooope. I need another 240SX/S14. Long story short, sold my ‘96 SE like an idiot even knowing what I had cause I bought a brand new ‘08 CLS Class Benz. I just didn’t find myself driving it anymore. It was banged up anyway needing a ton of body work, salvaged and didn’t pass smog so I’ll get a cleaner one this time. Agh! 🥺🥺🥺🤦🏻‍♂️

@cronicjohnson 7 ай бұрын

You from Wisconsin? In your uel civic video you were talking about automotion

@MemelordJord 7 ай бұрын

Yessir

@cronicjohnson 7 ай бұрын

@@MemelordJord mint

@elusive799 7 ай бұрын

Lots of good info here for anyone looking to do the Z32 swap. I'm a believer that the RB25 transmission is a better option since you avoid using an adapter plate - maybe I'll make a video on that as I go through the process.

@weenor 8 ай бұрын

Scoobert

@JBO1sk 8 ай бұрын

Can you keep your A/C?

@MemelordJord 8 ай бұрын

I don’t have a/c so I can’t say for sure. But i’m pretty sure you can. You can also ask them

@keithlarsen8423 8 ай бұрын

i run a 350z clutch and rb26 flywheel in my first gen frontier

@keithlarsen8423 8 ай бұрын

costed me about $500 canadian with clutch, pressure plate, flywheel and throw-out bearing.

@mboyd3361 8 ай бұрын

Bro had me trippin' with the sti spoiler lol. Also got me a kouki spoiler on my zenki 👍

@Dane_Price 8 ай бұрын

What brand cage is this ?

@MemelordJord 8 ай бұрын

Cusco

@crimsonram77 8 ай бұрын

Holly balls thats sexy 5:17

@JoeNotExotic003 8 ай бұрын

So you’re gonna turn a gs400 into a gs300

@trianglemoebius 8 ай бұрын

This is apparently the first video I ever liked on KZbin. I'd give you a like to commemorate this, but, well, y'know.

@validonsummer1453 8 ай бұрын

That truck quarter though, also I want my money back you got no chop

@felix2foedee 8 ай бұрын

fuck em , slow motion better than no motion. im building my ka24det too rn. cant wait to get it running. I hate when people ask when is the car gonna be done. Money & time. you got thid bro bro !!

@sdfiguh 9 ай бұрын

why do you think the oil pan would play a factor? it has baffles that ONLY benefit oil slosh and capacity. curious to hear why exactly you think thats an issue

@MemelordJord 9 ай бұрын

This was before we took the engine apart, and in the next video we found out the cap on the timing chain tensioner came off causing lost oil pressure. We speculated that it was the oil pan based off the knowledge we had at that time and I corrected it👍🏻

Ең жақсы KZbin

Пікірлер