Lets goooooooo!

Have you tried it with the DM

Tell me, is it possible to connect an audio card to it via type-c?

Helpful video. I’ve been using a long usb-c to power my tascam x8, works great. I don’t like trusting batteries for critical components.

Hello, I would like you to help me with some opinions, I want to purchase a complete kit for live broadcast of my events and I don't know what I would need

Hey! Nice video!!! Can I send graphics throu NDI like inserts to be used as chroma key? The point is that I want to record the program with everyting on it to the SD card

at first i thought you were acting as the clock hand on your countdown... but then realized it was just a digital countdown and you moved lol. I'll expect that next time haha good stuff.

mucho Delay

I can Connect favourite NDI program or device such as Caspar CG, NewBlue Titler, Adobe CC and many more?

I can Connect favourite NDI program or device such as Caspar CG, NewBlue Titler, Adobe CC and many more?

Does anyone know of a U bracket that can fit on the YC cage for the Yolo Box PRO that would allow for mounting at the back of rather than on the bottom? Essentially achieving the same back design as the Catefo.

❤

Aloha!🤙🏾🌊🏄‍♂️🌴😎

...you keep saying "$50", but even the screenshot in your video shows that it's $60.

I've just applied the update to my YoloBox Ultra and it's broken a YoloDeck function. The Program Audio button no longer switches off the Program Audio Out. Would you know who I should report this to? (Or am I doing something wrong?) I have a Live-streaming gig tomorrow so it's fairly urgent. Thanks :-)

Hi, I need a phone contact where I can contact you to help me with a professional camera set-up to record and broadcast live kickboxing sports events

I am assuming your name is Anthony. I viewed all your links and I'm not surprised by your marketing of 3 different websites. I'm hoping for your help. I'm needing to buy a switcher as I am a beginner looking to improve my Craps Table production. I am only using 1 single camera to film which I typically upload as a normal YT video to my channel. It has gained me over 5k subs in one year. I am now looking to improve the production with a 3 camera system where I can provide a better viewing of the dice landing and different switched views of the camera placement. I have already built 2 over head fixtures that will hold my cameras perfectly for a nice over head view of the table about 2 ft above the table. I need the ability to be able to record or stream directly to KZbin from the switcher and can allow me to have all 3 cameras and a push of a button to switch to each camera. Can you please provide me with the equipment you would recommend for this need. I also would be willing to pay you to do a walk through once it's setup for a training class. I think you should START A MEMBERSHIP PROGRAM on your channel. If you look at my channel I have started a membership program where I do live training of my strategies. I charge 150 per month for 3 30 minute lessons. Had you had a membership for helping with setup I would have already purchased it. There is a market for your talent and knowledge and feel that you are missing out on people like myself who would like to hire you just for your advice on equipment and help with setup. This can be done by setting up memberships which you would qualify from YT to do because you are over 1k subs. Memberships can be done in 2 ways one where you get to setup a Membership that will only be used for 1 month which would be something like i personally need the advice and help with setup by doing a video call to walk through how to setup up and use it for lets say 30 minutes or 1 hour. The other membership would be for your channel support and residual income for the channel like 10 bucks a month. The first day i setup my smallest membership which was 10 per month I had 21 people who signed up.

Very impressive video my brother. Really appreciate it. I do have a question that is very important to me that I hope you will answer if you have a moment. I am about to start my production of filming a CRAPS table for my channel. Currently I am only filming a single camera with no equipment. I can stream live directly into KZbin with NO 3rd party software. However I'm doing it as a webcam view. So here is my question can I record or stream live directly to KZbin just using this switcher gostream duet? In other words once I plug in everything and I am using let's say 3 different camera's can this switcher go live directly to KZbin without using a 3rd party software like obs. Is it basically using it's own software where you input your KZbin stream key to the software of the go stream? I'm hoping that i can just setup my cameras using the go stream and simply go live or simple record my footage grab my files and upload to KZbin as a recorded video or go live easy.

Any reseller in pakistan?

Hi, Is there any way to control the gain of the Headphone Output as in many scenarios its a bit too hot.

9:19 ... Is that Facebook statistics..??? How would i get this for my Facebook.. because i streaming to Facebook main page but i do not see any of this that your showing.. yess these are valuable information to see as a host of a stream. Please do tell .. thanks

And The heat is going over there... Well are those buttons getting hot now ??

Hi I have a question ... Is What you see on the TV.. is that the program out .. or is that the preview... Reason is Because I do not want that went I click the different button for the sub view... It is already outputing to the main auditorium monitor or Livestream program.. I do not want that to happen.... What I need to happen is that I want to preview the Sub view first ... In side by side and then let me be the one to put its out onto all the main auditorium monitor and Livestream program

Hello ! I am Farooque Shaikh from India. My Canon XC-10 Display does not match at all with the Display in Yolo Pro. What can be done ?

I am from India

Peplink B One… a little disappointed in their bonding service. Limited bandwidth. But it does work. I’ve resorted to just doing load balancing using various config’s. With all that said pretty good router and solution.

Was hoping this was a video that stuck to the title - NDI Bitrates, etc., and not focused on specific devices. <sigh>

Does it do wifi? I believe the TailAir uses wifi. I’d want to connect 3 or 4 with no wires if possible

Very well put.... thanks

We just bought 3 of these units a week ago ,but can't control Panasonic 4K PTZ i m getting the HDMI output but can't move the cameras

Hi i watching from South Africa

Perhaps the simplest explanation on this topic.

I just ordered the Makai White 12x from Scan computers Bolton, get it tomorrow, I mean't to ask if it has a remote control in the box like so many cameras like Sony have.

Hello, could you plz check your email? Thanks!😀

God the speeds are poor, what's a better alternative?

Thank you for the Update

Perez Scott Garcia Joseph Perez Brian

Hi, how do you make a purple background like this? Is it chroma key?

I’m using 5x Sony A5100 I bought for a bargain, 4x Sony ZV-E10 , one Sony A7 IV. I have a lot of lenses for the APS-C and fullframe. But last year, I added one camcorder, the Canon XF605 and it has become my favorite camera since. I love the camcorder because I don’t have to take separate ND filters, no XLR audio unit, not an entire collection of lenses. Everything is build in, the ergonomics are killing every DSLR which exists, I have buttons and dials for so many functions and the optical image stabilization is top notch (just beaten by Panasonic camcorders and the micro 4:3 cameras).

I had three JVC GY-HM850s and loved them, but they are only HD. Using Blackmagic URSA Broadcast G2s now and the 4K image quality is tremendous.

God that camera is ancient

I assume you have a good line with them so can you please beg them to add mix minus to the Instream? It’s a crucial feature for social which is the entire reason for the Instream. I also have a huge problem even using the mix minus on the Ultra. Any notes on improving reliability here I might be missing?

What are your thoughts on the Kiloview P3 and P3 mini bonding NDI devices?

I have an avkans ptz camera with ndi, sdi, and hdmi. I am currently using it as an ndi camera with ecamm and plan on buying two more. I have been having a problem with the camera freezing in ecamm during stream but not freezing on the avkans software. I didn’t know if this might be a network problem that might be fixed by running it over sdi?… if so, how would you recommend porting 3 cameras over sdi into my Mac? Would the usb out on a gostream duet give me access to control all three camera in ecamm or would only the camera chosen on the switcher be available in ecamm? Would I have to spend the extra money to build a pci chassis with multi sdi in and usb out? Sorry for the long question, I hope it made sense. I really appreciate you videos, they are quite helpful.

hello, if we pair a full keyboard, can we enter the titles directly?

mini-mx has touchscreen

How come I can’t find the YoloLiv app on my iPhone App Store? Does it only work for androids?