for used module for help me fast switching Router fiber 12v
@Phillip-y6d9 күн бұрын
seriously, this has file functions ? I've been giving up on these things for that very reason when they don't . Did you wire it to your hi fi ?
@zarboaudioprojects14308 күн бұрын
Yes, finally a way to access songs in files. I use it in a portable music player. It sounds pretty good. It's a nice find!
@Phillip-y6d8 күн бұрын
@@zarboaudioprojects1430 oh, I meant folders, but you know what I mean. I'm going to get it 👍
@zarboaudioprojects14306 күн бұрын
@@Phillip-y6d I called it the same thing. A file is the old school way of saying it... aka "File Cabinets" Have fun!
@Phillip-y6d5 күн бұрын
@@zarboaudioprojects1430 Thanks man, great demo! My plans are to solder the JST plug to RCA connectors and plug into my hifi system...like I do with my MP3Player. I don't like bluetooth - it quantizes and compresses even further. And I like this remote with actual buttons. Phones suck because you basically have to use both hands. I'm a couch potato :)
@zarboaudioprojects143016 сағат бұрын
@@Phillip-y6d I tend to not use bluetooth either, prefer files I make on memory cards or USB drives. Yes, the remote is really good! Feels good in the hand as well.
@kasscorey836412 күн бұрын
Does anyone knows the size of this mp3? I need that rn!!!!
@zarboaudioprojects143010 күн бұрын
Check out the product page: www.aliexpress.us/item/3256804777199515.html?spm=a2g0o.order_list.order_list_main.29.441718023aEdA5&gatewayAdapt=glo2usa It's a bit tricky to mount due to it's weird circuit board size and shape.
@joppepeelen15 күн бұрын
whats the use if a woofer makes this much mechanical noise. its not useable
@zarboaudioprojects143014 күн бұрын
Most high excursion subs generate noise when flexing near their limit. I believe this will be fine when installed in an enclosure. What we were hearing was things on the table vibrating, air moving rapidly in and out of the vented pole, and other similar stuff going on. It's a great driver. 👍
@Toid16 күн бұрын
Sick! I got the big brother 18. I can’t wait to see what you do with the 8! It is going to be so good!
@zarboaudioprojects143016 күн бұрын
Thanks, Senor Toid! I plan to make a fairly stylish enclosure, but it may be a little "limited" in output compared to the EIGHTEEN! Yikes... you go big, don't you! I can't wait to see what you do with that!
@Toid16 күн бұрын
@@zarboaudioprojects1430 well I guess I now have to make a stylish enclosure. Thanks for that 😁🤣
@griffiiin16 күн бұрын
You explained this exceptionally well in a short amount of time, kudos!
@zarboaudioprojects143015 күн бұрын
Thanks! And thanks for watching.
@jamesfalvey7719 күн бұрын
Pulled the trigger on the 10"
@zarboaudioprojects143018 күн бұрын
I considered that one... but settled on a 100 bill instead of 150
@jamesfalvey7715 күн бұрын
@@zarboaudioprojects1430 did some free air testing today on the 10". Really impressed. Cannot wait to get it going officially. It's taking everything I have Not to buy another one..... He he he
@roygriend514320 күн бұрын
Nice driver, i'm curious how this will perform against the epique e150 wich is smaller but have clean excursion even at high spl.
@zarboaudioprojects143018 күн бұрын
I was thinking similar, the Epique 180 is just a touch smaller, but similar in excursion. I'm thinking the Epique could be legit used as a woofer crossed to a mid, where this Ultimax seems more "Subby" in nature. The Ultimax frequency response starts getting Wonky starting at 500 Hz.
@roygriend514318 күн бұрын
@@zarboaudioprojects1430 i actually was thinking of your epique e150 build against the ultimax build you gonna make. Not fair maybe but maybe the epique could match up with it, would not be a impossible outcome i think!
@brianraulerson503720 күн бұрын
Kinda moves like me after 3 Red Bulls.
@zarboaudioprojects143018 күн бұрын
3 red bulls would literally kill me!
@jamesfalvey7718 күн бұрын
Well, we'd have to try putting the ultimax on your chest and do some sweeps to get you back. May not work, but it'd be cool
@zackmathers185420 күн бұрын
I can’t image mounting that thing anywhere where I couldn’t see it and drool over it!
@zarboaudioprojects143020 күн бұрын
It is gorgeous, you're right. I'm working on a unique 1 cu. ft. Roughly vented design for it. Thanks for watching and commenting.
@russ438721 күн бұрын
All I can say is this really clear and very well done video baled me out on a couple Realistic Minimus 40-2039B speakers I'm restoring for our workout room "mini" sound bar! the grill cloth and frame are fine but the grill retaining pegs weren't holding it on anymore. In trying to remove those plastic parts, most of them busted the box particle board away around them so just installing new ones wasn't going to eork unless I filled the damage with something. while snooping around online for ideas, I ran across your video and remembering I had a bunch of 9mm dia N95 magnets Laying in my stash, i modded your process a little and went ahead installing them in redrilled holes! as us oldsters used to say: "thats the hot ticket!". Good job and keep up the quality tutorials, PLEASE!😊
@zarboaudioprojects143021 күн бұрын
Thanks a lot Russ. I appreciate the encouragement, and I'm glad it gave you an idea on how to fix yours. I had a pair of Minimus 7W's. Gifted them awhile back, but I really love Radio Shack speakers from back in the day. Thanks for the comment!
@keithmarlowe556921 күн бұрын
The gold standard for how to videos. Clear, concise, well explained, no annoying music, and material list.
@zarboaudioprojects143021 күн бұрын
Thanks Keith! I appreciate the positive words. Thank you for watching!
@lesmay-c4w22 күн бұрын
Hi. Thanks for taking the time to make all your posts. Is there a board or circuit that gives the opposite function of this board? i.e. I give a 12v pulse of 1 second but get an output pulse of 12v for say 3 seconds? To put it into context, my camera controller has inputs from my reverse light and 2 side indicators to select the appropriate camera. The flasher unit is sometimes (not always) a bit fast for the camera controller and confuses it. If I could slug or elongate the signal into the controller it would solve the problem. Thanks in advance
@zarboaudioprojects143021 күн бұрын
Hmmm... I'm not sure there is a board for this... but you MAY be able to create this elongate the voltage for several seconds with the use of a capacitor inline with the positive lead. I don't know what value or voltage rating would work, but I think it may be an option. The cap would charge and discharge slowly to 'elongate' the voltage. Maybe do some searches on KZbin for this effect. AliExpress may have something that does this, but I wouldn't know how to search for it, what search terms to use. Good luck! If it works, feel free to re-comment, I'd be interested in seeing how it turns out.
@HoveyFarms22 күн бұрын
Thank you, I'll buy that one
@SUBsystemHawgCranker22 күн бұрын
Benson seems like a good hang
@TheGreatTomDix23 күн бұрын
SIIICK!
@zarboaudioprojects143023 күн бұрын
Thank you!
@jamesfalvey7724 күн бұрын
Send it ! Lol. Pretty impressive all-around. Appears to be a strong signal with no line driver
@zarboaudioprojects143023 күн бұрын
There might be another project coming with this amp, stay tuned.
@RWmHII27 күн бұрын
Why was this kit selected?
@zarboaudioprojects143025 күн бұрын
My wife liked it, and we thought it represented what most kits would be like to put together.
@RWmHII25 күн бұрын
@@zarboaudioprojects1430 good enough. Good series with a focus on keeping it simple. I would have been to watch this before my first try with a kit. I'm looking forward to watching the crossover stuff, and looking for tips to sharpen my skills. I must say, Mr & Mrs Zarbo make an excellent and entertaining team. Thanks for working hard on your channel.
@glasssswanАй бұрын
Thanks for this!
@zarboaudioprojects1430Ай бұрын
My pleasure! Thanks for watching
@joppepeelenАй бұрын
Superb and also, because of your video i boiught some vineer to, i was looking for affordable vineer for a long time it looks awesome !!
@zarboaudioprojects1430Ай бұрын
Thank you! I hope you enjoy veneering, it's really rewarding! Thanks for watching.
@xxflammablecreeperxx3297Ай бұрын
Are the quick connects standard size??
@zarboaudioprojects1430Ай бұрын
The red, positive is a .205, and the negative, black is a .110. Sub connectors are all over the place these days. Thanks for watching!
@xxflammablecreeperxx3297Ай бұрын
@@zarboaudioprojects1430 I’m using a jbl es150p and I just ordered one of these, do you think it will work?
@xxflammablecreeperxx3297Ай бұрын
@@zarboaudioprojects1430how do you connect it if the connection for example is too big? Can I just touch the terminals?
@zarboaudioprojects143021 күн бұрын
You can always solder the lines to the speaker as long as you don't keep the heat on too long.
@BudgetBassHeadАй бұрын
Great editing! Deserves more views.
@zarboaudioprojects1430Ай бұрын
Thank you! I have America's smallest large KZbin channel!
@howardstever6676Ай бұрын
Tom and Eileen - wonderful job. Very well put together. I follow your channel. howard from Ste. Genevieve, Mo.
@zarboaudioprojects1430Ай бұрын
Hey Howard! Thanks for the kind words, we both enjoyed the experience quite a bit. Eileen was with me at Jeff Bagbys PCD seminar several years ago, she was sleeping in the motel room, though. Are you still building speakers too? Thanks for watching and for commenting. I just broke 3000 subs. That took a long time! :)
@MattymewАй бұрын
Great video - thanks so much!
@zarboaudioprojects1430Ай бұрын
You're welcome, thanks for watching.
@jamesmacarthur2277Ай бұрын
Can you put this in a box with the internals opened like this, Or do you need to make a cover to protect everything?
@zarboaudioprojects1430Ай бұрын
The amp is sealed, no extra enclosure is needed. I just like to be extra careful. Thanks for watching!
@zarboaudioprojects1430Ай бұрын
The amp is sealed, no extra enclosure is needed. I just like to be extra careful. Thanks for watching!
@jamesmacarthur2277Ай бұрын
Oh ok great, thanks for the reply back
@mahmuta23Ай бұрын
Also spider
@jlparsonsАй бұрын
You, sir, are a massive nerd. I appreciate this. 😁 Really interesting build, this may influence my plans... 🤔🤔
@zarboaudioprojects1430Ай бұрын
I feel like I'm too old to be a Nerd, but I appreciate the confidence! Thanks for watching and commenting. These are COOL speakers!
@petercunningham34692 ай бұрын
Junk
@zarboaudioprojects14302 ай бұрын
I don't think it's junk, it is cool looking in action, but it is NOT accurate, you're right there. Shame, it would be amazing if it were.
@BioCybergoth2 ай бұрын
Good to see you, I am planning a stupidly detailed all purpose analyzer console that has 4 stereo vu meter kits, 1 for monitoring my mic, 1 for comms audio (discord, game VOIP) 1 for output level and another stereo pair driver but for the older style vu meter that I plan to use for monitoring bass only, a simple 8 or 9 led fast moving spectrum (look for Sony LBT-XB66 for the idea) to use as the main analyzer and a usb meter reading everything like volts, amps and power whenever I charge my phone, all contained in a simple box mimicking the looks of a hifi unit but this one is loaded with real time meters and do not feature bullshit like rgb stuff, just plain good ol' led meters and I hopefully a nice spectrum but everything on either ebay or ali doesn't feature video demonstration of said units working and almost all of them use a mic as the sole input which infuriates me, since I only want to pickup audio signals from my PC and NOT from the air, I was thinking of using this screen and luckily I saw your video before placing an order, thank god for you showing that this particular screen sucks! everything is moving even with an specific frequency, that's not how a spectrum bar should behave, the vacuum one was accurate and the other one is clearly just a bunch of micro vu's mashed together or daisy chained to work like that which totally destroys the purpose of a spectrum bar since you want feedback of one bar group or two depending on the frequency that you're feeding it, not the entire screen moving which does nothing but waste money and energy for something that could have specific and interesting uses, not this shoddy damned cursed thing, great video!
@vennakkodemenon94622 ай бұрын
Sir, please give me the inside measurement and crossover details for peerless 830990 woofer.
@zarboaudioprojects14302 ай бұрын
This should answer your questions: techtalk.parts-express.com/forum/speaker-project-gallery/1475926-harmonious-table-radio-subwoofer?p=1476834#post1476834
@vennakkodemenon94622 ай бұрын
Sorry sir. Woofer number is 830990.
@brianboro52782 ай бұрын
That’s one great wife!
@zarboaudioprojects14302 ай бұрын
Thanks, she is pretty awesome. Thanks for watching.
@analogkid45572 ай бұрын
Really great 3 part series! Thanks Tom! And Eileen!
@zarboaudioprojects14302 ай бұрын
You're welcome, I'm glad you enjoyed it!
@analogkid45572 ай бұрын
God is King! Great job Tom.
@zarboaudioprojects14302 ай бұрын
Yes! Thank you!
@analogkid45572 ай бұрын
Hey Tom! Love your videos!
@zarboaudioprojects14302 ай бұрын
Glad you like them!
@John-ng6yl2 ай бұрын
Now Zarb, don't you con me. Very nice. Looks great. Love the video.
@zarboaudioprojects14302 ай бұрын
Gracias Sir! They do look good, I'm proud.
@KeithEtheredge872 ай бұрын
Go Eileen!❤❤❤ So nice to see you and Tom having fun together. Showing everyone how it's done!
@zarboaudioprojects14302 ай бұрын
Hey Keith, thanks for watching! Eileen really had fun, except for the soldering!
@nobelstone97142 ай бұрын
The video is WRONG. Both examples, the over hung voice coil and the 'under hung' voice coil in the drawings are over hung. An over hung voice coil is longer than the magnetic gap. But an under hung voice coil is SHORTER than the magnetic gap. In both drawings the voice coil was longer than the gap.
@zarboaudioprojects14302 ай бұрын
Thanks for the comment, I think you're maybe looking a bit too close. The magnetic lines are there to give a rough idea of where the 'bulk' of the magnetic force is located.
@nobelstone97142 ай бұрын
@@zarboaudioprojects1430 Sorry but the drawing for the under hung coil is over hung
@zarboaudioprojects14302 ай бұрын
@@nobelstone9714 Okay, I won't argue. My drawing isn't perfect, I agree -- but it does demonstrate the basic idea.... and it was taken basically from a known 'Underhung' driver. Thanks for the comment.
@nobelstone97142 ай бұрын
@@zarboaudioprojects1430 But the drawing is incorrect.
@bblimediamostlyspeakers2 ай бұрын
This was a nice series tutorial, clear and easy to follow. I have built several sets of speakers, not from kits, but I did upgrade my first home built set with that same tweeter and that was a big improvement. Very clear highs, not too bright or zingy and not too dull. Might send these videos to a friend of mine. Very inspiring.
@zarboaudioprojects14302 ай бұрын
Thank you! And thanks for watching.
@DIYAudioGuy2 ай бұрын
Y'all make my day! Wish I could get my wife out in the garage with me.
@zarboaudioprojects14302 ай бұрын
She had no idea how much fun she would have!
@babyelephant30772 ай бұрын
It’s straight at least
@zarboaudioprojects14302 ай бұрын
Glass half full. It is!
@simonsayshomeassistant2 ай бұрын
Great video Tom
@zarboaudioprojects14302 ай бұрын
Thank you! I'm glad you liked it. Thanks for commenting.
@zackmathers18542 ай бұрын
Love this series, dude
@zarboaudioprojects14302 ай бұрын
Thank you! She's a lot nicer to look at than me too! :)
@jeffferguson3782 ай бұрын
Nice Tom! I've been using the MLTL's for front left and right along with a sealed version for my center channel in my living room. Probably been using them for 6 years now and I've been very happy with them. They sound good for stereo music and especially for movies. Since doing some updates in the room I haven't hooked the subwoofer back up but haven't noticed much since the MLTL's put out some nice deep bass. Curts website was very helpful when I built them as well
@zarboaudioprojects14302 ай бұрын
Thanks Jeff for the comment and info. After publishing the videos I connected the speakers to a line in source as opposed to Bluetooth and the extra oomph was nice, the bass was more pronounced. I bet the Trans lines sound real good too. How did I get thus far and not build these yet ? ;) thanks for watching!
@thomastjg532 ай бұрын
Would that amp work with a driver that is 150 rms , and peak 500 watts. And 50 to 200 hz range. Or would it be to much cause it’s starting out at 300 rms ?
@zarboaudioprojects14302 ай бұрын
I believe it would work fine. Too much wattage is preferred, you can always turn down the gain. Thanks for watching!
@thomastjg532 ай бұрын
How would that amp work with a driver ratted
@leif84362 ай бұрын
I think the crossover is a part intimidating to many. So I really apreciate your effort to show that everyone can do it with a bit of determination and learning!
@zarboaudioprojects14302 ай бұрын
I agree. Eileen said she needed someone next to her showing her or she would not have been able to complete them. For a lot of people, they may have to find a person who has a touch of experience and tap them for help. Thanks for watching and for the comment!
@leif84362 ай бұрын
@@zarboaudioprojects1430 Thank you for the content! I really hope you can continue with what you do and help many of us tackling the joys of building speakers!
@MaaZy_2 ай бұрын
Question: First thank you for the video. Q: would this relay delay the cut out? Meaning can it keep the light (as example) to stay On for couple seconds after the switch is Off? Then cut the power off the light?
@zarboaudioprojects14302 ай бұрын
This won't do that, but check this out from Ali: www.aliexpress.us/item/2261799877292267.html?spm=a2g0o.productlist.main.11.5757eQVLeQVLoz&algo_pvid=b3e813e9-8222-47b7-b461-ddd9a0ca5116&algo_exp_id=b3e813e9-8222-47b7-b461-ddd9a0ca5116-5&pdp_npi=4%40dis%21USD%211.92%211.92%21%21%211.92%211.92%21%402101fb1517215822233534561ec2da%2120000000117340115%21sea%21US%211618196486%21&curPageLogUid=nXSUn7gX7SQ8&utparam-url=scene%3Asearch%7Cquery_from%3A
@mrharvest2 ай бұрын
This randomly showed up in my recommended feed. I'm a bit confused about the thumbnail. Does a girl somehow build speakers differently to how a guy would? Do they have different sonic preferences?
@zarboaudioprojects14302 ай бұрын
No, they just smell better. :) No, there are SO few girls building speakers online (Try and find any) that I thought it would be nice to feature a WOMAN putting a kit together to encourage others to join in.
@Toid2 ай бұрын
What I love about this series is that it shows anyone can build a kit like this. Eileen killed it!
@zarboaudioprojects14302 ай бұрын
Like she said, "If I can do it, anyone probably can." She did pretty good with the tools too, I was surprised.
@brianraulerson50372 ай бұрын
A great trilogy! You don't have 10k subs "yet". A very well thought out video. Perfect for anyone.