Turn to Jesus people, he died for your sins. Repent of what the New testament describes as sin. Believe the gospel get baptized and obey the teachings of Jesus. The gospel and the teachings of Jesus are documented in Matthew Mark Luke and John. Jesus is the only way to be saved, if you have faith in Jesus through your faith you will live by his teachings. God bless you all in Jesus name amen.,

Thanks for the shout out. Glad you got it going 🍺

I now say "NITROOO" every time I use carb cleaner or ether to test a mower for starting.

The guy didn't want his 80 year old dad cutting grass?? At 80 he's just a kid!! How can I convince my kids to cut my grass?? Good video Tommy.

Those yard man mowers are identical to yard machine . I believe yard man was sold at Walmart at some point

I hope that fixes it cuz that knock was bad!! I need some junkers to come my way, only got the one Crafty with the busted head bolt, been putting that off till it cools down below FACE of the SUN heat!!

I just fixed a craftsman for a good friend of mine and he traded me 3 "turds on 4 wheels " i started it with ether it had a horrible shake. after tipping it on its side i found it had one of those Chinese blade adapters . I took the plug out and spun the blade, it was 3/8" off! Ridiculous! I thought the crankshaft was bent but no it was the adapter it was welded that far off!

Dino slept in?🦕

Oh yes, if the adapter isn’t just the right size it will make a terrible clunking noise. I bought a set of calipers just to measure the shaft diameters. The battery operated digital calipers are way easier to use than the old fashioned vernier calipers. Just FYI🤓

Happy Sunday Tommy 👍

Quantums Quantums Quantums! Long Live the Quantums! nice batch Tommy!

The heat broke today only 100 high Had a week off 104/110 😢

Change the fuel cap also, happens alot on riding mowers and can on push mowers also 😊

I spent some time this morning trying to figure this out. Will do it tomorrow. I find the speed rpm so low , the port clogs up to the bag.

Thanx for the update video!! I hope it runs like it should and you can move to more profitable ventures!!

Have clucks or Dino check the fuel cap vent. They can trick you, especially this red cap ones.

When I clean those carburetors and the float is sunk. I put a new china red seat in them. The tecumseh tool is nice to have.❤

I always pull the blower housing and spin the flywheel with an impact on the flywheel nut to check the coil, disconnecting the kill wire from the coil. If the coil is bad, I am ready to change it out.

Thanks alot tommy now I can't get that song out of my head (chuck E'S in love) lol

wow, the TB230 used to have a 190cc engine? It only has a 163cc engine now, and the price is higher. bastards hahahahaha. 190cc does seem like overkill though for a 21 inch mower. I've seen 24 inch riding mowers with a 190cc engine and they ran just fine.

the reasoning for having the front wheels higher then the rear by 1 level, is it mulches better. because when the mower first goes over the grass it cuts it at a higher level but when the rear of the mower moves over it it cuts it a little shorter but has less to cut. and smaller clippings . it also helps the engine some no bog down . cheers happy saturday.

Hardly ever have trouble out of b/s coils but the kohler xt6 engine has a problem with defective coils after several years 😢😢😢

I'm pulling my hair out! I picked up a craftsman 7.0 platinum yesterday and it was free but looked like brand new everywhere. It was severely overfilled with oil.so drained it down and cleaned carb which wasn't really dirty but had orange gas in it so got rid of that refueled and it won't start got spark and juiced it it?almost starts but it's blowing oil and smoke out the crankcase breather when I pull it. What to do ? Call it no compression and move on or what? Did I miss something?

Tommy. Not to second guess you, but you need to spin the engine faster to make a good spark. One issue I’ve been seeing. Is the rubber needle seat swells and fuel will only dribble into the carb so it runs out of fuel faster than it refills. To test this. I let it run until it dies. Then give it a shot of juice. If it starts. You know it’s a fuel issue. I’ve just seen so few coils go bad that I’m Leary

Never finished ur last video. It stopped so ya could talk to a lady customer.

Tommy, I would remove the top cover and gas tank. Give the engine a good cleaning and also the tank. Remove carb, blow out the fuel line . While the top is off, remove coil and kill wire and clean the contacts. Drain oil and pull valve cover inspect for water and adjust the valves. After the carb cleaned , pull muffler and blow it out and inspect exhaust port for water and debris. Put it all back together and if oil showed any eayer contamination, I would put some good, used oul init. After it running, while still warm, change oil, put in new oil. Lube all cables and the starter recoil WD40 works great for water issues and rust in a recoil. Lube the wheel and you will be able to get top dollar for it after s shine job.

Don't walk away from the microphone and expect people to know what you are saying.

Boring voice

Check the gas tank for water

Are those kohlers any good?

You never came back!! I hope it turns out to be a runner and a good money maker for ya!!

Thanks for the shout out Tommy. You should use the pause button on your camera if it has one. Good video and the Toro should be a money maker.

Remember safety! Always disconnect plug wire if you are spinning the blade.

Judging from the water line, that Tommy Time illustrated, me thunk a snorkel on the intake would dew. No excuse just solutions for keeping the lawn mowed 😁

Tommy I just wonder if the muffler is full of water not letting the exhaust come through

Do the carb run it that should be a excellent mower for you.

Pull cover and pressure wash it really good 😂 I’ve been there before a w hole load from Houston flooded out 😢

18 mm , number 8815 champion

I would be looking at the oil for water and sand ??? Plus looking inside spark plug hole 😊

Morning from Texas 😊

Nice repair, I don’t have any mowers right now. I have a class 3 hitch to put on my wife’s Honda pilot so that will be my tinkering for this weekend.

at the 36:38 mark the lizard said, "I'm outta here" LOL

WTF, delete this video, I want my 3 minutes back.

Not supposed to leave them outside Tommy. That’s why Briggs didn’t put hole in them. lol

Coffee & Tommy Time. Tommy saving mowers from going the landfill. 👍

Good detailed video Tommy. I like to blow a little air back into the tank after I disconnect it from the carb; helps clear any debris that might be in the tank screen.

Quick question, I have a 170cc "PowerCrap" mower that is a few years old. When I flip the mower and move the blade manually with my hand, should it be stiff and only move as I push it or should it freely move around and keep moving after I spin it?

Does the turkey baster make cluck nervous?

Early morning coffee and Tommy time 😊107 today 😢

Good morning Tommy.