Did I miss it or why are you not using Varget?

Would you recommend this powder for a 6 GT? No known data as far as I know.

That is weird man both same charges and everything?

I don't mean to be rude so I apologize if I come off that way, but a lot of your testing seems to lack some key element. You change too many variables at once, don't shoot enough shots, don't have chrono data, etc, and it often leads to you having more questions than answers at the end. I would HIGHLY recommend loading a few more rounds to use as foulers/sighters and to warm up the barrel before shooting groups. I would also recommend shooting at least 10 shots of anything other than a velocity workup if you want the results to be even remotely meaningful (and ideally more like twenty). In this video, since both 5 shot groups were of the same load, you need to look at them as an aggregate; a single 10 shot group rather than separate 5 shot groups. And it doesn't look like your rifle likes that load. On all your dasher videos someone comments how slow you run them, have you tried working up anything faster with different powders? Just a thought. Thank you for your content sir, I greatly enjoy and appreciate it

No V0 SD/ED so difficult to tell if the first group vertical was velocity driven. Second group horizontal was improved due to a marked calming of the wind. Thrown charges can easily account for much of the first group vertical. You need to shoot more shots, 5 is not significant. You do not know if the barrel requires a warm up or not, or what it does if you change propellant before cleaning.

What’s interesting is having a dasher and running it at less than straight 6BR speeds. You are 100 fps slow and have been with every load you shot out of this Dasher. Clearly the load isn’t stabil no matter what the es and sd say. Yet u keep beating a dead horse.

Nice 👍

My Dad tried staball in his 7mm mag and he wasn't happy, but he seems to be optimistic using LRT. He has some of bis reloder 26 left. He has a honey of a load with that one. He runs a 184gr berger on his reloder 26. It's a crazy accurate load. He can shoot the push pins at 100 yards every time. He runs a seekins havoc with a nightforce scope.

That is an interesting setup!!!

1st!!! Lol

I have to agree, some of my pockets are junk. I didn't really think I was over pressure the loads, small to no ejector smeer. I run a 24" barrel and safe "loads" bit me.

I really want Savage to release the 22 arc

Null

First time viewer, I appreciate the test. However with the current price difference of the two, I'd take Superformance all day. Varget is literally 2x the cost. Unless you're shooting competitively past 300yd, I don't think you'll notice a difference other than your wallet being lighter 🤣Besides you can always zero your gun with a "cold load", and keep your rounds in a cooler with some ice packs prior to shooting a stage in competition.

They look awesome !

Thank you, thank you for putting in target sizes!

I am thinking about building a 6 Dasher. What freebore reamer does your's have. When looking for a prefit, there are MANY options. Thanks in advance.

what trigger are you using?

45.3-45.7 is the node for that load and length. I shot a 0.342 with 100gr amax, hornady case, ccI LRM primer, varget at 39.6 and 2.198 bto in the same gun.

You should really try a long barrel 25 creedmoor. 31” Shilen select with 43.5 grains of N555 sends the 135 Berger LRHT 2950 and match accuracy. No pressure. 43.4 is a recommended load for 140s in a 6.5 creed per Viht.

Where are the BR Primers?

I've had good luck with StaBALL, especially StaBALL HD with Federal 215M Magnum Match Primers. Very good ES and SD's (low single digits). With CCI magnum primers the ES and SD have been a little larger, but not terrible. As far as sudden, somewhat un-explainable, stiff bolt lift, have you been diligent about cleaning the throat area of your chamber. Carbon ring is a big culprit in that kind of thing. And some guns are more sensitive to it than others.

Carbon ring? Are you using a bore scope when cleaning?

I’ve tried 6.5 staball in 6.5Creedmoor with awesome results

I would figure out why your getting the heavy bolt lift. Maybe case length is a little long? Or is the base of the brass getting blown out. If it's the later you might be a little to hot on the charge for that powder with that brass. The look of the primers doesn't always tell the whole story. It could have something to do with the two groups not being as good and not necessarily the primer.

Have you tried H4350 ?

That's still 6BR velocity. But i understand you need to see splash. PRS do run them on the slow side.

That's a 1/4" rifle just needs some load work. Try 0.020" in .

Virgin brass will affect SD and group size

Great groups. Any primer will do but agreed the 400 is looking like best option.

Good shooting. I don’t understand the difference that could cause the heavy bolt. That’s definitely strange but I’m guessing increases in pressure doesn’t always make higher velocity maybe 🤷🏽‍♂️

Great video as always.. Man I would love to twist your ear on the 6mm arc load testing I'm doing!

Those are some good looking groups.

what does 10 five shot groups average out too

beautiful unit.

Do you have a gunsmith lathe or just a normal one? Curious since you are using the steady rest. Im beginning my journey into barrel smithing this year

Obviously your barrel loves that load. My 26" bartlein 5r shooting 109s at 2953 matched the average of your first 2 groups. Dont recall oal, but i just started 15 thousandths off and didnt change. Havent shot in 2 years though do to re injury and surgery.

I just had my first hangfire ever. I was using cci450 and RL15. Kinda worried about my SRP brass now.

It appeared to me that you shot the Vargat right after the super performance. And did not give the gun 15 minutes to cool down. Regardless of the temperature instability, super performance held a tighter group. Both groups seem to hit the same elevation at the same point regardless of the instability with super performance.

Available only for Rem 700 clones. thank you but no thank you.

Any plans to do a 25cal project? Since it is getting more popular in PRS .

Is your impact action gettint more smooth now? Great review!

Do you offer chambering services??

I would really like to see a follow up review on the action now you have a few more rounds on it.

thank you very much and i'd seen another person take an MDT grip and install it on this chassis or you could 3d print a vertical grip too (in any color you want)

It's not the tuner. How do you prep brass, measure load, seat bullets................... It's you

pretty sure MDT made the chase for Aero, and they said over a year ago they would have a folding stock addon. have not seen it yet.

The L3i weights also work. That’s what I’m using

I just drop a Solus action/straight jacket armory barrel into a Solus chassis….you said you just made a 1 off metal bag rider ?? I’m looking to replace the plastic one

For people who don't have the tools to shorten a bolt, am I safe to assume something from the hardware store could be used instead?