This drive has a certain discharge time according to the Danfoss VLT 6000 HVAC drive's manual.
@abdoulli6 күн бұрын
Hi, I have a repaired NAE55 that Johnson Controls sent me. I'm wondering if it is possible to configure the NAE without the help of a Johnson Controls technician. I only have the NAE with the MAC address, and I don't have the IP address for this device. It was likely reflashed during the repair.
@Systemcontroltech3 күн бұрын
Yes. I've got several videos showing how to access them with free tools.
@anthonyrivera9909 күн бұрын
Great video, but anytime you had a pop up window, like the find and replace box, it doesn't show up in your video.
@Systemcontroltech9 күн бұрын
I noticed that. I believe I had a capture setting wrong. Didn't know until after I recorded.
@AnthonyBartlett-i1t10 күн бұрын
how do you change a hardware input to a network input?
@Systemcontroltech10 күн бұрын
I'll see about making a video showing how
@AnthonyBartlett-i1t10 күн бұрын
@@Systemcontroltechyes please! Trying to resolve this asap
@Systemcontroltech10 күн бұрын
@AnthonyBartlett-i1t ill work on it tomorrow and hopefully have it up either Monday or Tuesday. Basically you will create a network input and change your connections to that new input.
@AnthonyBartlett-i1t8 күн бұрын
@@Systemcontroltech any luck! I've got to do this for a couple programs
@timothystark598612 күн бұрын
With the new engines did they fix the issue when pulling points in the other way? I run a Tridium network, and in the past when I integrated a NAE or NCE it would never give you the actual point names, they came in basically as the object number (so for isntance DAT would come in as AI_2304 or some other nonsense).
@Systemcontroltech12 күн бұрын
The only time I've had thar issue is if the naming wasn't done in the device being pulled in.
@ethanarmstrong269312 күн бұрын
We are sitting at a point right now deciding to add our new Phoenix PCI to our existing ADS or the new ADX we just got. This is a great help.
@Systemcontroltech12 күн бұрын
I'm glad to help. Make the export tables are set up in the jace. I've got a video card in this video that takes you to another that shows how to set them up.
@DIYHVAC13 күн бұрын
How do you install the image file? I have it as a mei file.nothing will open it
@Systemcontroltech13 күн бұрын
You will use sct or the image tool to open it. When you select download code in sct you should be able to link the image.
@DIYHVAC13 күн бұрын
@Systemcontroltech but first dont you have to install the nae images? Its a mei file or something. Do I have to install sct first to open the image files and install them?
@DIYHVAC13 күн бұрын
Do you have any broken nae5510-3 you want to sell I repair them.
@jerrykorman777016 күн бұрын
Excellent. Thank you
@Systemcontroltech13 күн бұрын
Thanks for watching and please subscribe
@jasonm508119 күн бұрын
Howdy, I take the SCT archive and upgrade the database, then download to the SNE at my desk. Must do both partitions 15 minutes apart. Then all you have to do is delete from serve, hot swap, and pair!
@Systemcontroltech19 күн бұрын
I've done that also.
@tonyk8-g4h21 күн бұрын
Thank you
@Systemcontroltech19 күн бұрын
You're welcome
@angelovivilecchia612724 күн бұрын
I've been watching your videos for years always great... I just started using MUI.. Thanks for sharing your knowledge
@Systemcontroltech24 күн бұрын
MUI has a lot of features. We recently went to 14. I plan on doing a review of it in the near future
@NickDeal27 күн бұрын
Wow, you are the first customer that I have seen purchase a Fault Triage license. I keep trying to get our bigger customers to purchase Fault Triage but they never want to spend the money.
@Systemcontroltech27 күн бұрын
There's a lot in it that is useful but you must make sure to set the equipment relationships up properly.
@Systemcontroltech27 күн бұрын
Feel free to share the video.
@randyfeldkamp27 күн бұрын
You are very good at explaining stuff I’ve been dealing with ABB drives for a long time in the HVAC industry, and you by far explain it the easiest I was just wondering if you can actually use just the keypad to upload from your computer using the ABB software your perimeter settingsand then take it to the job and download it to the drive
@Systemcontroltech27 күн бұрын
Hey Randy. I don't think you can. I think it has to go straight to the drive
@jasonm5081Ай бұрын
Thanks for all your Metasys videos!
@SystemcontroltechАй бұрын
More to come!
@JosephFrancis-pg2yxАй бұрын
Hey man - I love the videos. I use your videos to learn about Metasys launcher and MUI. Great learning material. I think you are the only person that takes the time and effort to teach about Metasys. Thank you.
@SystemcontroltechАй бұрын
Thanks for watching Joseph
@raaz6569Ай бұрын
Thnx for sharing
@SystemcontroltechАй бұрын
Thanks for watching
@johnfabiano6679Ай бұрын
Have you received any SNE's running firmware 13.0.1.100? I just received one and could not get the resource files to access the device from JCI's website. My rep said he would get me the files, but, he told me I can use the UI to access it directly. After sniffing out the IP address, I put my laptop on the same network, opened my browser, and typed HTTPS://(IP address)/UI. I was then prompted to put in the username and password. Once I accessed it, I first added my login credentials, then changed the DHCP IP settings to Static and put the device into my network. I rebooted and logged back in and changed the name of the device. Again I rebooted. I am currently waiting for my server software to be updated from version 12 to version 14. Once that is complete, I will demote the device and discover it into MUI. Hopefully all goes well, since I have never done it with this UI before. I need version 14 to upgrade my data base for the old NAE to an SNE firmware version 13. Let me know if you have had any experiences with this yet.
@robertferrara427Ай бұрын
Pretty good description of the horrors on working on a old truck, I have worked in auto body for 45 years and could complete any mechanical work, but at 77 i had to get my nephew to loosen that alternator bolt and nut last night, I think your socket number is wrong as Japanese cars like 10, 12 and 14 mm and German cars like 13mm. good effort on your video though.
@SystemcontroltechАй бұрын
That was the socket I used. Thanks for watching
@jonnymac31Ай бұрын
Thanks for sharing
@SystemcontroltechАй бұрын
Thanks for watching John
@nickboomershineАй бұрын
Thanks for the education and do you have any videos on doing advance cct programming or tridium database build?
@SystemcontroltechАй бұрын
Yes. You can find them on my channel
@nabeelmubashirАй бұрын
Nice 💯
@SystemcontroltechАй бұрын
Thanks
@mohamedhussain6210Ай бұрын
Thank you and its good video. Can you please make video for Jace & Metasys networking part. If the networking not done properly then we can't execute this step by step guide. if you have any video for that please help
@SystemcontroltechАй бұрын
I'll see what I can do.
@mohamedhussain6210Ай бұрын
@@Systemcontroltech thank you
@yuukimirai6015Ай бұрын
Hi i need cct software can you provide me?
@SystemcontroltechАй бұрын
Contact JCI
@donnellbaxter8050Ай бұрын
Thankyou sir make more videos
@SystemcontroltechАй бұрын
Thanks for watching. More coming
@kironsk7697Ай бұрын
HMI is showing offline and one of the fec module is showing fault with off steady light. What could be reasons?
@SystemcontroltechАй бұрын
Try resetting it. If that doesn't work, try commissioning into it directly.
@kironsk7697Ай бұрын
One of the fec module showing fault. What is reason of it?
@SystemcontroltechАй бұрын
Try to commission into it.
@asirzed5305Ай бұрын
Six years since you published this amazing DIY video and no a single comments. Well, God directed me to your video and I love it! Thank you so much for the time and effort you put into making it available to us. Now I can fix that damn light that has been bothering me for over a week now.
@SystemcontroltechАй бұрын
I'm glad it helps.
@clipertunАй бұрын
Same year, mines up to 380k now
@SystemcontroltechАй бұрын
I'm well over 400k and still going.
@jorgehumbertohernandez4060Ай бұрын
" sensei" gracias por el video,
@SystemcontroltechАй бұрын
Thanks for watching.
@Ken-wu8zh2 ай бұрын
Great Video. Thank you for sharing.
@Systemcontroltech2 ай бұрын
Thanks for watching and please subscribe for more
@JhonGomz2 ай бұрын
Thank you sr just bought a 2003 ext cab 173 000 miles love it I will replace the belts ✌️
@Systemcontroltech2 ай бұрын
Parts are linked in the description
@AhmadMatrood2 ай бұрын
Great video, its really hard to find informative material with metasys
@Systemcontroltech2 ай бұрын
I'm trying to put more out when I have time
@RaymondNocciolo2 ай бұрын
Great video! I’m having an issue where I can discover the NAE from the JACE, but my NAE doesn’t see the JACE. BACnet routing is enabled on the NAE. Could you possibly show a screenshot of the configuration setup for the JACE? I’m particularly interested in the IP network ID and device ID settings to ensure the JACE can communicate with the NAE. Thanks!
@SystemcontroltechАй бұрын
There are a few things to check. Can you browse to the Jace from another location? If not, check the network policies of the company where it is installed. We have the IP address reserved using the Mac ID of the device we're installing and then set the device to DHCP enable.
@enriquesegundo10802 ай бұрын
Gracias!!!
@Systemcontroltech2 ай бұрын
You're welcome.
@brianharmon5902 ай бұрын
@Systemcontroltech can you help me im having an issue on discovering a device on a fc trunk this device name is TEL could you make a video on this i have a project currently and im stuck on this. If you can please reach out to me
@Systemcontroltech2 ай бұрын
I'm not sure I'm familiar with a TEL. I've worked with TECs. The main thing is to be sure of the protocol, the instance ID and the baud rate.
@chaddarr48342 ай бұрын
Y👍
@Systemcontroltech2 ай бұрын
👍
@papajonn872 ай бұрын
I have created an export table and pulled the points into Metasys. We are having an issue where the Jace is refresh the data accurately but it’s lagging on the Metasys server. How do I get Metasys to refresh as fast as the Jace? Also thanks for the video.
@Systemcontroltech2 ай бұрын
That's a big challenge because some of the things that can affect it is the network traffic and data being used by the system.
@papajonn872 ай бұрын
@@Systemcontroltechok. Thank you for the reply 😊
@mikeunt63332 ай бұрын
Hey do you work as a cntrls system tech for Jci? I’m currently in the hiring process and has a question to ask you thanks man cool videos
@Systemcontroltech2 ай бұрын
I don't work for jci
@mikeunt63332 ай бұрын
@@Systemcontroltech oh okay I just got a job offer for controls system tech level 3 and it was 30 an hour I was shocked at the pay I even emailed him and told I was underwhelmed - isn’t that low? Shouldn’t it be like 35-40 at least ?
@mikeunt63332 ай бұрын
I’ve never done it before but I hav experience in programming and electrical - how long have u been doing it for. I hope I get the job I’m in vetting process now I hope I like it I was trying to get your videos to look into the day in the life to see what I’d be doing
@moonbrothers90982 ай бұрын
Your a bloody legend thanks mate!!
@Systemcontroltech2 ай бұрын
Thanks for watching
@venkateshsonti20572 ай бұрын
I Need a link to download CCT.. where to find
@Systemcontroltech2 ай бұрын
It's on the jci license portal
@wreckanchor2 ай бұрын
Drain plug is a 14 mm not a 9/16.
@Systemcontroltech2 ай бұрын
Thanks for watching
@ManojkumarAyyappan-f2y2 ай бұрын
I want to know which data base has used can you explain that how to see the used data base type and version
@Systemcontroltech2 ай бұрын
SQL database is all these are.
@IshfaqAhmad-xv3kk2 ай бұрын
hi very nice video can you make video please metasys tab action insert and query all details thanks
@Systemcontroltech2 ай бұрын
I'll see what I can do
@RobertHarles2 ай бұрын
"Instalation" is misspelled!
@Systemcontroltech2 ай бұрын
I was never good at spelling
@paulvalente23573 ай бұрын
Great video your whole channel is amazing keep up the good work!
@Systemcontroltech3 ай бұрын
Thanks for watching. I appreciate it.
@nowere45793 ай бұрын
Love tridium work!!!! Nice job.
@Systemcontroltech3 ай бұрын
Thanks for watching
@dcj20453 ай бұрын
Thank you so much for all your videos. It helped me out a lot.