Tongsheng

Пікірлер

@BayezidAli-x1l 20 күн бұрын

I like simplicity. I did not like cables and display. Is it possible to use TSDZ8 without display, speed cable, throttle etc? This is my plan: I build this system with everything. I choose level of assistance. Then, I remove everything except motor and battery. Since, motor works when i press to pedals. It seems it can work with only battery. Is this possible? Thank you in advance.

@owiseman73 25 күн бұрын

I like the system so far. The shown spacer (time 1:01) would be great to have with the motor. Was not in my set - I ordered some standard DIN 988 Passscheibe 35x45x2,5 - works well!

@TheBigwesb 29 күн бұрын

Where in the uk can i get a adapter cable to put a different display on my TSDZ8 instead of the vlcd5

@AA-ve6du Ай бұрын

Why no parts available for tsdz8?

@user-ls2bn2mw9i Ай бұрын

How do you torque properly with that silly looking wrench?

@TheBigwesb Ай бұрын

Either by way of spending decades tightening different fittings that you can now torque it by feel. Or you can also start by throwing that silly looking wrench in the trash & getting a torque wrench 🤣😉👍🏻

@jaygarcia7095 Ай бұрын

When will parts for the tsdz8 kit become available in the United States?

@jean-francoisdesrosiers6980 2 ай бұрын

Why you put magnets on?

@macroefish 2 ай бұрын

Would have been good to know theres three springs under that wired copper ring thing.. almost lost them doing this in a bike stand

@user-ls2bn2mw9i 2 ай бұрын

where do you get the tool used in the video?

@tongsheng1998 Ай бұрын

You can ask the dealer where you bought the motor and show the pictures of the tools. Normally, they have already or they can buy from us with the motor(reasonable freight since it's a little bit heavy) .

@williamtuttle7315 2 ай бұрын

Can this be used on tricycle?

@TheAntoine191 2 ай бұрын

The 4 screw on the pltor are ridiculously tight

@tongsheng1998 Ай бұрын

You can try hard or considering the electrical tools.

@user-ls2bn2mw9i 2 ай бұрын

what is acceptable endplay and how do you shim for excessive end play. I have .035 and all kinds of clicking noise coming from chainring side of motor.

@user-ls2bn2mw9i 2 ай бұрын

What is acceptable end play tolerance and if excessive how do you resolve it?

@jasonbourne4437 2 ай бұрын

💥 Limited Time Offer! Use discount code TSDZ8 to enjoy 5% OFF! Head over to Powallon.net

@MarioRed-l7q 3 ай бұрын

I will not buy it untill parts are available.

@kb_79 3 ай бұрын

Hello, which store can we buy it? Thank

@ukrytykrytyk8477 3 ай бұрын

Please make parts for this motor available!

@kb_79 3 ай бұрын

Hello we do not understand, it is the videos but we must also make the pieces available.

@tongsheng1998 Ай бұрын

The video shows how to do it with the right procedure. The parts is able to buy online(depends on your location) then you can replace it by yourself after you got it.

@TheBigwesb Ай бұрын

@@tongsheng1998Hi there, I'm currently waiting for my new TSDZ8 to arrive in the UK from the Germany warehouse. Can you tell me if I will be able to use any other displays with it rather than the vlcd5 that comes with it. Would I be able to use my UKC1 display with a adapter cable or I also have a KT-LCD7C & a M6C I'm hoping I will be able to use one of them lol Also will you be releasing any custom software for the TSDZ8 or a upgradable controller etc. Thanks & I look forward to getting my kit. 🙂👍🏻

@CrownJewelzMusicGroup 3 ай бұрын

Mines makin weird noises and jammin up im still under warranty an only done 2k miles they suppose to be good for 5k miles .how do i get a replacement?

@gravelbikeandmoutainbike1207 3 ай бұрын

Bonjour serait t il possible d avoir l entraxe des trous de fixation du plateau. Merci

@eugenkotek7768 4 ай бұрын

Tongsheng TSDZ8 should have torque sensor instead of speed sensor, so why do you sow up speed sensor in installation kit?

@csoradominik7409 4 ай бұрын

Speed sensor gives signal to controller and you can see your speed on the display. Torque sensor is sensing pedaling torque and can assist you.

@eugenkotek7768 4 ай бұрын

@@csoradominik7409 Correct, I have realized that. It is clear for me now. Thank you.

@danielduesentriebjunior 4 ай бұрын

Interesting conversion. I consider doing something similar with an Azub Six or HP GTe. Is your conversion procedure explained anywhere? Why did you not choose Bafang instead?

@ChonghanZhao 5 ай бұрын

国内如何购买？

@АйзекБариев 5 ай бұрын

У меня просьба к разработчикам, а нельзя ли поменять последнюю пиктограму TURBO на пиктограму FUII. Full означает переход мотора в режим максимальной производительности и мощности. Turbo, это как то не по русски 😊?

@АйзекБариев 5 ай бұрын

TSDZ8 больше подходит для двухподвесных велосипедов, что бы не мешать работе заднему маятнику подвески велосипеда

@stan4oburger 5 ай бұрын

100mm Botom Bracket option would be nice

@mickaelnardin4275 5 ай бұрын

Hello, on TSDZ8 with VLCD5, by default is configure 15 or 16A. What change and why setup 20A for exemple ?

@АйзекБариев 5 ай бұрын

более высокая переваремая мощность ~ 750 вт

@mankihonda983 5 ай бұрын

Just bought one, I knew I could figure out how to assemble it on my own but its nice to now have this too.

@sportduh1401 5 ай бұрын

I have a bike with v-brakes. Does this motor have a sensor when I brake? Or how does it works when I brake, because of course I would not like that motors pushes on when I start braking?

@АйзекБариев 5 ай бұрын

Да, ест.ь.. В комплекте ручки для механических тормозов, они без проблем будут работать и с тормозами V типа.

@garth62 6 ай бұрын

What is the correct grease to use?

@leonelbrunoaraujomendesfro9201 2 ай бұрын

Silicone

@Dimitris_Papadiotis. 7 ай бұрын

I have the tsdz2 with the vlcd6 display and after 4 years of problem-free intensive use, the error code E03 appeared on the screen. It doesn't work anymore. Does anyone know what this code could mean?

@Dimitris_Papadiotis. 7 ай бұрын

@GoofyWelshGit 7 ай бұрын

I've recently fit one of your kits to my mtb. I have to say, so far I'm very impressed! Installation went without issue, too.

@remziakyuz 7 ай бұрын

Hi, Its look likes very nice. Do you have a 1000w mid drive kit with torque sensor? If yes, can you share links of specs and online store? Thanks.

@jasonbourne4437 2 ай бұрын

Limited Time Offer! Use discount code TSDZ8 to enjoy 5% OFF! Head over to Powallon.net

@theredmaster_superbee 9 ай бұрын

Can you give me the link where I can buy the brakes but for bull type or racing road handlebars? Also the link to buy the battery... thank you.

@JL-od4wg Жыл бұрын

Where to buy?any link?

@strawhatpirateOPC 11 ай бұрын

Yes

@lokz9632 Жыл бұрын

Who sells these motors? I cannot find any info besides on PSWpower, and they are out of stock

@lokz9632 Жыл бұрын

I want to buy this motor, 750W version but there are nowhere to be found for purchase. PSWpower is the only store i found, and they do not have any in EU stock.

@strawhatpirateOPC 11 ай бұрын

I'm a supplier from China. Ready stock

@lokz9632 11 ай бұрын

@@strawhatpirateOPC Link to a website or store?

@lokz9632 Жыл бұрын

Lack of communication is what makes chinese companies look unreliable on the west. You should really hire some comunity manager.

@SuperJohnfoster Жыл бұрын

How can you change it without that special tool

@hongyangjiang4976 5 ай бұрын

kzbin.info/www/bejne/q162imOofLJ4g9Esi=MV1i2SUBgECHNn7A

@StarSlingerUK 3 ай бұрын

I need to know this

@hongyangjiang4976 3 ай бұрын

@@StarSlingerUK Longer screw go though the threaded hole on the gear, don't use power tool.

@macroefish Жыл бұрын

the 5m 20mm bolts for the fixing plate arent long enough once the 3 washers are in place on other side. had to get my own 5m 25mm bolts and spacers myself. my bike is a mongoose tyax sport 2012 model

@АйзекБариев 5 ай бұрын

У меня велосипед Stels Navigator 910, это единственый велосипед где рама сваривается в России. Рама сделана из конструкционной стали. TSDZ2B подходит в её кареточный узел с очень высокой точностью, проставочные шайбы - не нужны. 👍 Я не стал уставливать кронштейн из пластины 3 а приварил сваркой маленькое ушко, что бы отказаться от громоздкого кронштейна с низу, в поперечную планку, одного, но более короткого болта, под ключ торкс, для передачи реактивного момента от мотора из той же стали и получилась очень лёгкая и прочная трехточечная система конструкции крепления двигателя, где сам корпус мотора работает как дополнительный усилитель дропаутов самой фермы рамы. Я не стал устанавливать курок ускорения, а установил 2 звезды на 42 и 52т зуба, и мотор работает ТОЛЬКО от педалей до 45 km/h. Я очень доволен, и этой конструкцией, и мотором Тонгшенг 😊👍👍

@АйзекБариев 5 ай бұрын

Вся прелесть этой конструкции заключается ещё и в том что с наступлением зимы электрооборудование приходится снимать до тёплых времен года так как суровых погодных условий не выдержит НИКАКАЯ электроника и велосипед превращается в обычный, данная версия этого набора позволяет легко делать это.

@АйзекБариев 5 ай бұрын

Здесь вот лучше отметить, после установки данного набора очень хорошо пересмотреть передние тормоза, 160мм ротор спереди SR Suntour Epixon на гайках, этого комплекта все равно недостаточно для эффективного замедления дорожного движения. Нужно искать более высоконагруженую переднюю вилку с ротором от 180мм, компании SR Suntour. С данным набором двигателя этого комплекта.

@АйзекБариев 5 ай бұрын

Вообщем, работа этого двигателя - просто песня.

@SolarizeYourLife Жыл бұрын

How do you tell that yeu got a B version vs the original???

@АйзекБариев Жыл бұрын

Не отступайте от концепции компактного мотора в низу . Это нужно для низкого центра тяжести для высокой производительности велосипеда 😊

@jurijjful Жыл бұрын

How many kilometers can you drive, on a single charge, on a 10ah battery, on a Tongsheng TSDZ2 motor?

@paulmryglod4802 8 ай бұрын

15 watt-hours per mile. 36 v x 10ah = 360 watt-hours/15=24 miles. Thats traveling with a lot of motor assistance. It will go much farther with a lower assistance level. I did 40 miles and had half a charge left on a 13ah battery.

@Oceanbluemoss Жыл бұрын

Why does the vudeo at around 2mins put the white back in the put a round silver plate across top and tighten the 5 screws only to loosen them again ? Then put the motor back in , it makes the instructions very confusing as the things u do in sequence seems not exactly how you would do it , sure you would not tighten acrews to loosen them again ?

@tongsheng1998 Жыл бұрын

The round silver plate is the tool

@dzidmail Жыл бұрын

@@tongsheng1998 You should put there 1mm thermal plate for massively better heat transfer.

@Oceanbluemoss Жыл бұрын

@dzidmail I myself have never experienced over heating issues with this motor and I'm always on level 4

@dzidmail Жыл бұрын

@@Oceanbluemoss And that was probably their rationale, but that is lousy engineering. You don't create air gap around a motor and then seal it with enclosure. Let the heat radiate and you either can use more power or use a smaller lighter motor.

@Crand0m 9 ай бұрын

I have the 750w motor stock firmware and my motor burnt out going up a hill. You need the cooling mod or lower power limit (400w)

@JaisonK83 Жыл бұрын

I need information on what diameter the fit on the frame hub is. the length is 68 to 73 but what is the exact diameter?

@csnparadise1955 Жыл бұрын

Do the washers come in the kit?

@macroefish Жыл бұрын

mine came with the 3 washers. but then i had to get longer 5m bolts and more 5m washers to instal the fixing plate.

@henrique14211 Жыл бұрын

Any link for purchase?

@strawhatpirateOPC 11 ай бұрын

Supplier tsdz2b. Can send sample too,

@henrique14211 11 ай бұрын

@@strawhatpirateOPCyes sample would be better, we could order from wrong link

@strawhatpirateOPC 11 ай бұрын

Here

@babaturanurang 11 ай бұрын

@@strawhatpirateOPCthank you

@Roboprogs Жыл бұрын

It would be helpful if these kits included the eccentric (off center) spacers for the larger diameter one piece crank bottom brackets

@lemoldubricoleurbaguettema5075 Жыл бұрын

Nulle ce moteur et ses performances. Sensor toujours dur même en assistance 5, du 250 watts au 750 watts peut de différence. C'est une merde qu'ils essayent de fourguer. Je revend mes trois moteur pour remplacer par autre chose.

Жыл бұрын

OSF le transforme littéralement (google)

@АйзекБариев Жыл бұрын

Понятно, первое техническое обслуживание при нулевом пробеге и далее. Мне понравилось крепление силовых проводов важно, их длина от аккумуляторной батареи должна быть как можно короче.

@user-ls2bn2mw9i 2 ай бұрын

if only a LBS could do it.

@maxspruit8370 Жыл бұрын

Esoulbike denies waranty on my tsdz2 due to "heavy rain". How is this possible? It is rate ip65. It only lasted me 4 months in city use before it broke due to water ingress.

Ең жақсы KZbin

Пікірлер