On my sentra, I did two coats of the super hard shell turtle wax paste wax and then did a coat of seal and shine and a coat of turtle wax ice spray wax and I’ve gotten great results
@lugburz75392 сағат бұрын
Great review! A big benefit of this kit, for me anyway, is that it doesn't require any power tools. Would heat be a problem when doing this? Would it be ok to do this outside in summer, or would a garage be preferable?
@dtail4uКүн бұрын
Why didn't you just plainly wash the vehicle. To me using all those other products Cheats on the true results. IMHO Tkz!
@rjones476Күн бұрын
Thanks for the active discount code!!!
@Warrengraff-ym2yj3 күн бұрын
Been eyeing this soap as I'm running out and wanting to try something new that's good value. Thanks for an excellent review! I think this is the one I'll pick up! 😊
@16sondra3 күн бұрын
2 months and I have zero beading. Trash
@ChicagoRob24 күн бұрын
Right up there with 3D GLW Ceramic Detailer and Griot’s 3-in-1 Ceramic Wax. These three are my go-to’s for everything.
@hogflies32084 күн бұрын
I applied it wrong then, if you use a foam cannon and mitt it, if you don’t hit it in time it leaves marks on your car where the ceramic beaded.
@petervilla62285 күн бұрын
Thanks for doing the work.
@15DurangoRT6 күн бұрын
Give it a week and I'll look like you never even cleaned it.
@15DurangoRT6 күн бұрын
You're supposed to give it an hour or two drying time in between coats.
@mciti25946 күн бұрын
I bought this for $14 USD on Amazon this week and am about to use it on my parents Tacoma. Hoping for great results! 👍
@daxkindle51546 күн бұрын
Pro tip: whenever you use any type of brake cleaner or wheel cleaner never follow-up with soap after spraying the surface. Allow the product to dwell for about a minute or in your case like 45 seconds because you're in the sun and then use your brushes to further the product and then comeback with the foam to stop the cleaner from continuing to clean and eat away at any protective coatings you may have.
@conwaysdetailing3878 күн бұрын
I use a tire shine apllicator pad, i like it. Probably the only other tire shine I use other than gtechniq.
@clintsaines92749 күн бұрын
Is koch chemie still making FCL Wheel cleaner
@michaelchung59329 күн бұрын
I have this product, it smells tereible, an the fumes burn the eyes.
@JoseJose-kl7bj10 күн бұрын
i used Amplify yesterday for the first time, to replace bead maker.. wow is it slick, and the car looks wet, even the day after (reason why im replacing bead maker). Amplify is the only product i have tried from ADS. I recently also got into rinseless, and like doing a hybrid, a pre-rinse before the rinseless.. anyways, i only tried ONR, Absolute, Koch Chemie RRW, and DIY Detail, i prefer the DIY over the others, but currently waiting on ADS Hero to show up, and i cant wait to try it thanks to the impression Amplify had on me.
@ionlite10 күн бұрын
This review is legit. If water beading is indicator of the performance of the wax there was no beading occurring after 5 months (I applied the wax in November 2023 on a Honda Civic and a Tesla Y and by April 2024 there was zero beading occurring). In prior years I had used Collinite 845 and 476s and there was still water beading occurring after 5 months.
@Zecro6710 күн бұрын
Thanks for the video... easy as cake..m
@bogieman10111 күн бұрын
That is disappointing, was about to pull the trigger. I'll just wait.
@kumarpuri775212 күн бұрын
Turtle wax for sure. Even has good self drying
@bwilliam402312 күн бұрын
how about 1.4mm? where can we buy 1.45mm?
@jfrlhobbs13 күн бұрын
I have the Active 2.3 with the 1.45 orifice and the foam it produces with Adams Mega Foam and Chemical Guys Mr. Pink is AWESOME!!!
@bogieman1017 күн бұрын
When you say awesome, is it comparable to what is in the video with 1.25-1.35? I just have seen too many videos where people were bragging on the foam and it was way to runny, at least compared to these veteran detailers.
@jfrlhobbs7 күн бұрын
@@bogieman101 I have the 1.45 orifice installed that came with the Active 2.3 and the foam that it produces with my MJJC is AWESOME!!
@itzjonjon693 күн бұрын
I have the 1.45 installed in my active 2.3 with the mjjc v3 and I’m a bit disappointed in the foaming, if I want thick shaving cream foam I have to put in a ton of car soap
@maxs797613 күн бұрын
It comes with a 1.45 in the same bag as the manual
@jimadams211313 күн бұрын
The 1.45 that Active recommends is not good?
@armourdetailsupply13 күн бұрын
Thank you for trusting Shampoo+!
@_DannyG13 күн бұрын
My new favorite wheel cleaner is Koch Chemie Alkali wheel cleaner. It’s a new product and works great!
@angelonyt788614 күн бұрын
I like mega foam it’s just a lil too expensive 😞 I only buy by gallons
@rafaelr575415 күн бұрын
That much foam with a 1:10 ratio?!! Wow!!
@mmetdker15 күн бұрын
just ordered this kit, thanks for the video👍
@jazzman946916 күн бұрын
Am I the only one who purchased this foam sprayer and can't get foam action like I see in video's? I have tried each nozzle and several different products and dilution radios and still not working as advertised. What a shame.
@ro-yale516117 күн бұрын
What is the soap/ water ratio on the cannon?
@barrywatson-qb3di19 күн бұрын
Great video thank you
@haceakademi515620 күн бұрын
Merhaba. Vakum gücü nekadar? Makineyi kullanmak icin yani vakum yapmak için mutlaka buhar ve su tetiğine basmak mı gerekiyor ? Bu tetiğe basmadan vakum yapılmıyor mu ? Yani elimle bir makine ile ıslattığım bir yüzeyi yalnızca vakumlaya bilirmiyim?
@Zulek8520 күн бұрын
You search for easy spray and tinse product? It's Autoglym Polar Seal. It's spray using foam cannon and rinse. Way fast faster than this. Durability, glosd and hydro are awesome. And you can't do any mistakes. No streaks either! 😀
@thomasdeluca75421 күн бұрын
Awesome stuff for sure ✨️
@katmonaghan934121 күн бұрын
We did the lights on our 2005 Honda Element yesterday. The Step 1 pads never turned yellow? They did come out better overall, but not as good as I'd hoped. Maybe we didn't sand them enough. Not sure. Anyway, appreciate the video! Thanks
@marty355322 күн бұрын
Please list the steps in the beginning before waxing
@byronnix162822 күн бұрын
Problem is some pressure washers aren’t suppose to run on a 1.1 orifice. It’s bad for the pump/motor. Like the active 2.0. More gpm will help with foam and also more soap in the mixture. Not just the orifice.
@samkmety26822 күн бұрын
Mine have a haze over them after following the instructions. Why?
@BeeGee771923 күн бұрын
Cool! So you’re saying it works
@iprophecy676820 күн бұрын
Yes it works really great. And it also includes a protective coating so that the lights dont just go back to looking like trash again.
@6time68623 күн бұрын
Thanks for getting right to it unlike some other reviews. Good video. Well explained.
@jamram992423 күн бұрын
I found that a Rigid box type shop vacuum had much more suction power. I used a spray bottle (with pump) to apply the cleaner and then used a suction tool adapted to the shop vacuum. This little Bissell machine looks like a very nice unit though
@jamram992423 күн бұрын
I found that a small shop vacuum like a Rigid with a suction tool at the end does a better job. It has so much more suction power than these integrated carpet cleaners.
@marcusbarnes592924 күн бұрын
How long does it last?
@Six3SixTay15 күн бұрын
Up to 12 weeks my man!
@illestFlavor24 күн бұрын
Did Speed and barrier revive Fusso coat on the more weathered areas? Im in Vancouver BC too and found Meguiars ultimate quik wax on the common touch points for the slickness like doors, handles, gas cap etc but Sonax BSD if i didnt care about slickness on the rest of the car.
@josephshirah24 күн бұрын
Been using this for a few months now. Done a couple applications even though the 1st was still working perfectly and the water still beads up beautifully even after a few months. It makes washing and getting dirt and bugs off so much easier also! Paint looks pretty wet for a simple spray wax. That’s applying it to cars that are 10+ years old!
@lukefitt5624 күн бұрын
“Mom! I told you to stop eating sauce out the jar.” “Don’t tell me how to live my life, boy.”
@gummybums26 күн бұрын
I have one and when using it the machine seems to put out a lot of condensation under it. Gets very hot underneth