Apollo by Mosack Group

Пікірлер

@JorgeGarcía-w2k 4 күн бұрын

🎉🎉🎉🎉 gracias carnal por tus videos de❤ Dios te bendiga 🙏🙏❤️

@sk55142 23 күн бұрын

@apolloretailonline does this work with PEX A pipes

@laszlopacsai2850 Ай бұрын

How do i change size from 1/2 - 3/4 ?

@jamesdavies686 Ай бұрын

A plumber once told me never drive the nail in all the way with the hangers and leave about 1/4"

@darylwade2335 3 ай бұрын

I can't tell you how much this video helped me. I had to identify the Pex I was using and then figure out the stainless steel crimp rings. This video answered all my questions. Thank you!

@RolandWebster-l1u 4 ай бұрын

Taylor William Robinson Richard Martinez Karen

@Invisus_Letum 5 ай бұрын

I stfg take that music and pound it

@worththefight3000 5 ай бұрын

This to is shit. It either doesn’t want to start ratcheting closed and then when you finally get it to it doesn’t wanna release or you can start again. It stays stuck piece of shit too many ones out there that worked to buy this bullshit.

@biffhenderson1144 6 ай бұрын

Threads need to be reversed on one end so you can draw both pipes together at the same time. Terrible engineering on such a simple product. Nerd designed. Let me say this again. One end right handed thread with the other end left handed thread. Doh!

@blackpine6693 6 ай бұрын

They warn about plastic nano particles……how about pex…..do they shed particles ….chemicals……how long do they last …do they break down over time ….what about hot water ……changes in water chemicals /acidity does it affect pex…..

@R2D2M 4 ай бұрын

KZbin comments section is not the place for answers try google and most of those questions the answer is no.

@blackpine6693 4 ай бұрын

@@R2D2M it’s a statement …..what is your expertise that you can say “no” you said “most” what about the rest…..huh……..And what makes you think You tube is ….”not for answers”….

@curtismalone583 6 ай бұрын

What kind of BS is this

@snehp382 7 ай бұрын

Don’t trust him

@Slaphappy-_- 7 ай бұрын

What’s the best?

@lequang2296 7 ай бұрын

Liked & Shared

@SteveJordan13 7 ай бұрын

I just bought this item from Home Depot and it gets stuck every time I try to release the clamp jaws. I am using the matching Apollo PEX pinch clamps with this Apollo tool.

@apolloretailonline 7 ай бұрын

Please email Cory - [email protected] - and he can help you with the tool.

@metalslug97 7 ай бұрын

Great video. I'm no plumber and I've never soldered in my life. I'm very unhappy with the way that I soldered my copper fittings together, so I'm putting my pride aside and just going with pex. There's just not enough weekends for me to be a decent solderer/plumber when my work has nothing to do with it.

@blackpine6693 4 ай бұрын

@@metalslug97 that’s your problem you say you never soldered……then you said you were not happy with your soldered fittings …..so what is it …..

@ryankramer 4 ай бұрын

@@blackpine6693 It's both. He's never soldered before, so his attempt was crappy, and he doesn't want to spend the time to get better at it when there's another solution that will get the job done. Pretty straight forward.

@blackpine6693 3 ай бұрын

@@ryankramer if he doesn’t wasn’t to spend the little time it takes to learn to solder……how will he work with pex …..there is a learning curve there also……there is never an easy button……

@ryankramer 3 ай бұрын

@@blackpine6693 There isn’t an easy button, but there is an easier button, and pex is certainly more forgiving than copper for mistakes along the way. 🤷🏼‍♂️

@OGRScintilla 7 ай бұрын

First time working with plumbing, and dealing with converting my old poly b over to new pet fittings. Thank you so much for helping navigate this scary thing called manhood 😂

@bobbybuilds103 8 ай бұрын

Yeah you did the easy side. I'm over here trying to hold the barb from spinning while flipping a 100ft roll at the same time. Not so easy.

@EthanPDobbins 8 ай бұрын

Yea me too right this minute looking up how to use these silly things. All they need to have is reverse threads on both sides and you could draw both pieces of pipe together without an issue but as it is these things are just about as hard to use as the grey ones. Get one side in and it levers itself back out when you attach the other side. It is incredibly hard with half inch pipe. 3/4 will just slide over any ol fitting. You can even make a coupling out of 1/2 inch iron pipe for 3/4" and it works fine.

@sharongrindstaff6078 8 ай бұрын

Excellent video. Can you make a video explaining how to remove crimped metal PEX fitting and replacing all the fittings with poly without cutting the PEX on each side of the fitting. I am afraid if I cut the PEX as in this video that eventually the water lines will be too short Thanks in advance ( or refer me to another resource)

@Wilem35 8 ай бұрын

Just use a connector to extend the pipe. Don't reuse the PEX that was over a previous fitting.

@davenoi9609 9 ай бұрын

Pex B is fake! PEX is a polyethylene material which has undergone a change in molecular structure using a chemical or a physical process whereby the polymer chains are chemically linked. Crosslinking of the polymer chains of polyethylene (HDPE) into PEX for pipes results in improved properties such as elevated temperature strength and performance, flexibility, chemical resistance, environmental stress crack resistance (ESCR), resistance to slow crack growth (SCG), toughness, and abrasion. Crosslinking makes PEX a "semi-thermoset" polymer, providing excellent long-term stability.

@Beydan5610 9 ай бұрын

@teamsilva7563 10 ай бұрын

Which of these three connections is most reliable? It seems like the stainless steel sleeve is best to my eye

@howtodoitdude1662 8 ай бұрын

I prefer the SS pinch connector, no need to check with a gauge like the others.

@Wilem35 8 ай бұрын

@@howtodoitdude1662 Cheaper tools as well

@SALESMECHPRO 10 ай бұрын

Hi we have contacted one of your emails regarding about sale and haven't gotten a response. Please send us the best quotation and delivery time for below 1/2" SS316 Ball Valve, Brand: Apollo, 96F01327 QTY : 10 Pc Also Please share us approximately packing dimensions for freight calculation Thanks & Regards

@apolloretailonline 9 ай бұрын

Please email Brooks for any sales inquiries: [email protected]

@SALESMECHPRO 10 ай бұрын

@ZMEDGUY 10 ай бұрын

A waste of $60 , only used it 1x and no longer works

@apolloretailonline 10 ай бұрын

We're sorry for your frustration. Please contact Cory - [email protected] - and he can assist you with your tool or send you a replacement.

@Thetileguy 11 ай бұрын

The crimping tool for sleeves have a wrong description on the manual for the “go and no go “ if we listen to this guy here

@jessemalott1900 11 ай бұрын

The light will not go off !! Stays on all the time ?????

@apolloretailonline 10 ай бұрын

Try replacing the battery. If that doesn't work, please email Cory - [email protected] - for a replacement tool.

@CFPVideoProductions 11 ай бұрын

I am installing a 1/2 inch 3 way ball valve in my motorhome. I have very little space in back of the valve and need to use a 1/2 inch NPT to PEX B elbow. When I tighten the pipe elbow, it orients away from where I need it pointing. What can I use to get the threads tight and in the direction I need it pointing to?

@tennis2469 11 ай бұрын

this will slow your water flow so bad. dont use it.

@ImperialPainting-ht8ql 11 ай бұрын

I have this for an exterior spigot. I can fill my 370gal hot tub in 1 hour and 30 mins at most while we wife dishwasher is running, no issues at all

@Wilem35 8 ай бұрын

Best way to conserve water.

@squarebody4546 11 ай бұрын

Can't find information anywhere on website what the minimum fitting distances are for Apollo white PEX A...?

@apolloretailonline 11 ай бұрын

1/2" is 0.7", 3/4" is 0.93", 1" is 1.17"

@bigjohn2810 11 ай бұрын

famous last words, "never had one fail on me yet"

@jettison8390 Жыл бұрын

Pvc is always a better and cheaper solution..😓

@adnan9520 Жыл бұрын

@@jettison8390pvc is garbage, bad for health and bursts when frozen in cold weather

@jettison8390 11 ай бұрын

@Navy1977 it's because of the price and simple installation.. just some glue and a good pipe, but I guess these new pipe makers need their own niche, so who am I to say anything..🤷🤔😅

@jettison8390 11 ай бұрын

@Navy1977 to each their own..🤷

@TheGuruStud 11 ай бұрын

Cpvc is brittle trash. Laborious to install and will always fail with age.

@painlesstom 2 ай бұрын

PVC isn't allowed to be used in many places, only CPVC. But, CPVC gets very brittle with age and will shatter like glass. I've seen too many demonstrations of that happening, so I'm likely going to use PEX in the house I'm building.

@lordlee6473 Жыл бұрын

Apollo is trying sell pipes or tools? lol.

@williamtoney2599 Жыл бұрын

Cheesy music

@guybenoit2004 Жыл бұрын

Great video Just not clear when you use 1/2 inch pex pipe and when 3/4 inch pex pipe is required. Any help would be greatly appreciated

@guybenoit2004 11 ай бұрын

@Navy1977nothing to do with codes which allow both sizes. Just trying to confirm the main should be half inch and pipes going to faucets one qtr ?

@edgarmartinezmorales7234 Жыл бұрын

Feliz año nuevo 👍

@edgarmartinezmorales7234 Жыл бұрын

Feliz navidad 👍

@country_boy9180 Жыл бұрын

Not impressed with the tool, but I do have a fix for it not opening- happened to me with the tool in he wall, and I had to cut the Sheetrock to get it out. If the release lever doesn’t work, look at the movable handle, above the plastic grip, where it enters the frame. There is a silver pawl there that engages a gear on the same shaft that the movable handle pivots on. If that pawl doesn’t release the gear blocks the jaw from opening. You can reach in between the frame and the handle from the side of the crimp tool and trip that pawl while turning the release lever.

@JeremyLogan 4 ай бұрын

Thank you. I'm sure I tried that already, but that did the trick. Unfortunately it locked up on the very next crimp. Not sure how I'm going to do this in confined spaces 😞

@d-m.n_--2 Жыл бұрын

So much more information is needed on these instructions. The C-Rings used to secure the bolts in place are very tight and will disappear easily, so you should do most of these adjustments inside of a box. The adjustments are just for impacting how much tension is used to create the crimp and are not for adjusting the length of the tools or for affecting the width of the tools maw. The adjustment bolt needs to be pinched on both sides with your fingers when pushing it out for adjustment or it will likely pop out of place and parts of the assembly may get lost. All crimp tools that I have used so far have additional functions to make the job easier than just "open and close like pliers", so make sure to look up the individual tools specs to see how all it can function.

@jimlassiter749 Жыл бұрын

junk, can't adjust for beans... jaws always completely close & crush the crimp. the adjustment screw is too short doesn't go far enough in to make contact with the toothed ratchet plate to enable an 'earlier' release before crushing the crimp & the small oval hole for the set screw (that locks the ratchet plate) barely has enough travel. the ratchet plate might as well be welded in place.... they couldn't figure out how to make a simple switch that automatically sets the correct needed crimp distance per crimp diameter...? btw, this vid is useless....

@kawarthakenny1077 Жыл бұрын

Thanks, helpful

@kimkferrarillc4878 Жыл бұрын

I have a issue with removing the cover clamps off of the hot water heater is there a tool for that

@BC-ne2yn Жыл бұрын

can you show how each fastner is the same but just looks different? wonder why pinch clamps are banned in many countries/jurisdictions? your sharbite removal tool is a scam. your manifold having plastic connection are prone to leak like all plastic threaded materials. the use of tape to prevent leaks is no even a thing, thats bad threads or bad joint, if your solving that by tape your just bandaiding the problem. thats also why you dont have plastic to plastic or plastic to metal thread connections.

@tehpurplepills Жыл бұрын

the use of ptfe tape to prevent leaks is the sole purpose ptfe tape exists.....im a pipe dope guy though

@BC-ne2yn Жыл бұрын

which is why its useless is typical situations, threads seal the joint with help of lubricant. tape should not be relyed on to seal any joint, its a backup in bad situations. it also gets debree into systems because people over use it. it voids manufacture specs with some devices. refridge especially @@tehpurplepills

@TheGuruStud 11 ай бұрын

🤡🤡🤡🤡🤡

@miteBaMountainMan Жыл бұрын

Thank you

@leestebbins5051 Жыл бұрын

If you buy the $90 tool you can re-use the $12 fitting.

@chesshooligan1282 Жыл бұрын

If you buy the $5 screwdriver, you can re-use the $0.05 screw.

@djRoyalTee Жыл бұрын

If you don't, you'll spend $190 on the do overs... lol 😆😆

@williamelam1657 Жыл бұрын

My nightmare plumbing problem has been resolved.thankyou so much ❤

@jamacalexander Жыл бұрын

After finding absolutely no instructions with the tool on how to calibrate it (let alone, the need for calibration, other than there's a "calibration gauge" with it), I turned to your web site. Found the instructions easily enough, but after smashing one end of the rod to kingdom come (it was way too tight from the factory) after several attempts and getting zero results, suddenly the head of the adjustment screw fell off! It wasn't a screw I was adjusting, but a nut apparently used for locking the adjustment screw in place! WASTED AN HOUR TRYING TO FIGURE THIS STUPID THING OUT! All of your instructions and videos show no locking nut for that screw and I just figured you changed the type of screw you were using! You need to delete all of your videos and online instructions on how to adjust this stupid tool and update them!!! You might want to include that nut, and that it would be a good idea to use it to lock in the adjustment screw so it doesn't get lost over time. Maybe?!?!?!

@blakebowerman Жыл бұрын

Terrible video…basically just what the instructions say which are equally as terrible.

Ең жақсы KZbin

Пікірлер