This video explains how to install Apollo PEX-B fittings and tubing. @apolloretailonline
Пікірлер: 53
@metalslug972 ай бұрын
Great video. I'm no plumber and I've never soldered in my life. I'm very unhappy with the way that I soldered my copper fittings together, so I'm putting my pride aside and just going with pex. There's just not enough weekends for me to be a decent solderer/plumber when my work has nothing to do with it.
@OGRScintilla2 ай бұрын
First time working with plumbing, and dealing with converting my old poly b over to new pet fittings. Thank you so much for helping navigate this scary thing called manhood 😂
@williamelam1657 Жыл бұрын
My nightmare plumbing problem has been resolved.thankyou so much ❤
@swffej2 жыл бұрын
Thank you that was a big help in figuring out all the different connectors!!
@rogerwaugh49292 жыл бұрын
Does any of these rings work with the pinch tool
@lequang2296Ай бұрын
Liked & Shared
@godofplumbing Жыл бұрын
For inside pipe fittings, you must increase one pipe size diameter that you would of used for copper pipes.
@TheGuruStud6 ай бұрын
False.
@godofplumbing6 ай бұрын
@@TheGuruStud from all your years of experience right? What's the inside diameter of a 1/2 inch PEX Cinch on 90'?
@sharongrindstaff60783 ай бұрын
Excellent video. Can you make a video explaining how to remove crimped metal PEX fitting and replacing all the fittings with poly without cutting the PEX on each side of the fitting. I am afraid if I cut the PEX as in this video that eventually the water lines will be too short Thanks in advance ( or refer me to another resource)
@Wilem352 ай бұрын
Just use a connector to extend the pipe. Don't reuse the PEX that was over a previous fitting.
@kawarthakenny10779 ай бұрын
Thanks, helpful
@blackpine669325 күн бұрын
They warn about plastic nano particles……how about pex…..do they shed particles ….chemicals……how long do they last …do they break down over time ….what about hot water ……changes in water chemicals /acidity does it affect pex…..
@miteBaMountainMan10 ай бұрын
Thank you
@Slaphappy-_-Ай бұрын
What’s the best?
@talarirenatimuniswamy3843 Жыл бұрын
Tanks good video
@guybenoit20047 ай бұрын
Great video Just not clear when you use 1/2 inch pex pipe and when 3/4 inch pex pipe is required. Any help would be greatly appreciated
@guybenoit20046 ай бұрын
@Navy1977nothing to do with codes which allow both sizes. Just trying to confirm the main should be half inch and pipes going to faucets one qtr ?
@rickeykeeton4770 Жыл бұрын
Do you go one size larger to make up for loss pressure due to fittings being inside of pex?
@apolloretailonline Жыл бұрын
No, the size on the packaging matches the size of pipe you are using. If you are using 3/4" pipe, please use 3/4" fittings.
@robertjackson7590 Жыл бұрын
@@apolloretailonline "one size larger to make up for loss pressure due to fittings being inside of PEX?" Rickey is asking about flow in comparison to using PEX in place of Copper tubing. Copper vs PEX A vs PEX B flow drop at then end? B fittings with A tubing with a crimp is what some use with no substantial drop for example.
@DanielGomez-cf6vk3 ай бұрын
I do
@howtodoitdude16623 ай бұрын
You don’t lose pressure, you lose flow rate.
@kimkferrarillc487810 ай бұрын
I have a issue with removing the cover clamps off of the hot water heater is there a tool for that
@teamsilva75634 ай бұрын
Which of these three connections is most reliable? It seems like the stainless steel sleeve is best to my eye
@howtodoitdude16623 ай бұрын
I prefer the SS pinch connector, no need to check with a gauge like the others.
@Wilem352 ай бұрын
@@howtodoitdude1662 Cheaper tools as well
@leestebbins505111 ай бұрын
If you buy the $90 tool you can re-use the $12 fitting.
@chesshooligan128210 ай бұрын
If you buy the $5 screwdriver, you can re-use the $0.05 screw.
@djRoyalTee10 ай бұрын
If you don't, you'll spend $190 on the do overs... lol 😆😆
@Thetileguy5 ай бұрын
The crimping tool for sleeves have a wrong description on the manual for the “go and no go “ if we listen to this guy here
@MilonKhan-yy4sf9 сағат бұрын
Brown Anthony Miller Mary Perez Paul
@bigjohn28106 ай бұрын
famous last words, "never had one fail on me yet"
@PedroAntonio-jw7rr Жыл бұрын
Whats the tool called to clamp it
@alecrispoli9968 Жыл бұрын
Crimpers
@jamIam6548 Жыл бұрын
Bend fitting on type b!? Type b doesn't have the flex needed like type a..
@fillup40 Жыл бұрын
I will use copper pipe thank you.
@looking_335 ай бұрын
Hi! Thanks
@djshortsleeve9132 Жыл бұрын
Pex is not high density polyethylene. It’s cross linked.
@davenoi96093 ай бұрын
Pex B is fake! PEX is a polyethylene material which has undergone a change in molecular structure using a chemical or a physical process whereby the polymer chains are chemically linked. Crosslinking of the polymer chains of polyethylene (HDPE) into PEX for pipes results in improved properties such as elevated temperature strength and performance, flexibility, chemical resistance, environmental stress crack resistance (ESCR), resistance to slow crack growth (SCG), toughness, and abrasion. Crosslinking makes PEX a "semi-thermoset" polymer, providing excellent long-term stability.
@lordlee64737 ай бұрын
Apollo is trying sell pipes or tools? lol.
@jettison83906 ай бұрын
Pvc is always a better and cheaper solution..😓
@adnan95206 ай бұрын
@@jettison8390pvc is garbage, bad for health and bursts when frozen in cold weather
@jettison83906 ай бұрын
@Navy1977 it's because of the price and simple installation.. just some glue and a good pipe, but I guess these new pipe makers need their own niche, so who am I to say anything..🤷🤔😅
@jettison83906 ай бұрын
@Navy1977 to each their own..🤷
@TheGuruStud6 ай бұрын
Cpvc is brittle trash. Laborious to install and will always fail with age.
@BC-ne2yn10 ай бұрын
can you show how each fastner is the same but just looks different? wonder why pinch clamps are banned in many countries/jurisdictions? your sharbite removal tool is a scam. your manifold having plastic connection are prone to leak like all plastic threaded materials. the use of tape to prevent leaks is no even a thing, thats bad threads or bad joint, if your solving that by tape your just bandaiding the problem. thats also why you dont have plastic to plastic or plastic to metal thread connections.
@tehpurplepills6 ай бұрын
the use of ptfe tape to prevent leaks is the sole purpose ptfe tape exists.....im a pipe dope guy though
@BC-ne2yn6 ай бұрын
which is why its useless is typical situations, threads seal the joint with help of lubricant. tape should not be relyed on to seal any joint, its a backup in bad situations. it also gets debree into systems because people over use it. it voids manufacture specs with some devices. refridge especially @@tehpurplepills
@TheGuruStud6 ай бұрын
🤡🤡🤡🤡🤡
@tennis24696 ай бұрын
this will slow your water flow so bad. dont use it.
@ImperialPainting-ht8ql5 ай бұрын
I have this for an exterior spigot. I can fill my 370gal hot tub in 1 hour and 30 mins at most while we wife dishwasher is running, no issues at all