Пікірлер
@demartinsm8479 Ай бұрын
What threads fit the crankcase drain on this model? Thinking about doing this mod to my 337. Thanks!
@MikeDPlxztc Ай бұрын
Oh sorry I watched again I see that you did use the drain hose I guess without the drain hose you would have to take the big plate off and maybe you could just remove the entire plug mechanism from the oil pan? Oh so you did say 30 weight oil so I am assuming that means just a straight SAE 30 weight?
@Shopworx Ай бұрын
As far as the engine oil goes I'm pretty sure it's a 10-30w diesel rated oil I'm running.
@MikeDPlxztc Ай бұрын
@@Shopworx thanks, that's good news as straight 30 is kind of hard to find
@MikeDPlxztc Ай бұрын
Thanks for the video this is going to be a great help to me👍 I have to do this job out in the field in a couple days. couple questions though. why not take the whole larger under plate off seems like it would give more access to the oil drain and more opportunity to clean out dirt( looks like only four bolts) also better camera vision. also I'm glad you mentioned the motor oil in the hydraulic oil being the same that is kind of hard for me to wrap my head around😅 you did not say however the exact specifications of the oil. I guess you did not need the drain hose mechanism and what's the process of actually opening the drain fitting?
@Shopworx Ай бұрын
It's designed so you don't have to pull the drive covers and possibly bugger up the seals on them. I know Id rather have to worry about the pipe plug sealing again vs cutting an oring on the drive covers.
@MikeDPlxztc Ай бұрын
@Shopworx copy that. 👍
@boostaddict_ Ай бұрын
These are good graders, the 4-71 will be loud and won't have a ton of power but it should still work ok. The tilt blade wasn't standard, that's definitely a good thing to have. Those split rims are definitely easier to do off the machine lol. Editing to say hydraulic steering is the way to go. Did it with some parts off a Massey combine when the box cracked on my dad's 562. Princess auto cylinder and haven't had an issue since.
@Shopworx Ай бұрын
Good to know. I've got the parts to reseal the gear box but want to go hydraulic steering so haven't re assembled it yet. Have you any idea what model of combine it was. Otherwise I'm looking at eBay for a orbital valve. Local shops haven't been overly helpful on sizing a steering valve.
@JrKelly-rb4eu Ай бұрын
Nice rig. Keep an eye on that ccv mod, it looks like the elbow fitting that you used may have reduced down to 1/2 inch instead od 3/4 which can cause positive cc pressure.
@zachdavis1776 2 ай бұрын
From the back of the trailer what was your measurement to the center of the axles? Center of the center mount? Building my own trailer out of a 8” i beam from a park model 30’ trailer
@Shopworx Ай бұрын
Not sure exactly, I won't be back around it for a while. One thing I'm going to point out with it is that the axles are moved further ahead than I would normally build a trailer because I wanted less tung weight on the bumper of my 5th wheel trailer when I tow it behind the RV. I didn't want a bunch of sea sawing going on. I just make sureI load whatever properly to keep it tongue heavy enough to be safe.
@FirewoodWasteHauling 2 ай бұрын
wanna sell it
@D3ADLYforce4354 3 ай бұрын
Video helped make up my mind. Needing to replace the battery in an Outlaw 110 so I think it should be the same. Thanks!
@charleswelch249 3 ай бұрын
You mighta found a diamond in the rough. Seems like the previous owner just ran the grader in the ground without proper maintenance. The worst part is the transmission and breaks. The rest shouldn't be too bad to repair. Can't wait to see you grading the driveway with it.
@lorenmeyer5290 4 ай бұрын
Very very nice Shawn!
@kennethcroll6972 4 ай бұрын
hi Shawn, like how the bumper looks, if you putting a third brake light on how about putting behind the spear wheel like this kzbin.info/www/bejne/q5ysaGuvpZaIiJo ??
@chiefbloodygrass 4 ай бұрын
tight hole... nice... good quality job
@Ferxabrikids 4 ай бұрын
hey, one question do you know if there is any lifkit for this ?
@xxsilverxxfox5153 4 ай бұрын
What did the rims come off of? Part number for the gps speedometer plz.
@lucsurmon2623 4 ай бұрын
👍
@danconlan8735 4 ай бұрын
That is awesome, that motor alone is worth about $7000!
@Shopworx 4 ай бұрын
Yes, I love the deutz's. I try to take home every one I can get my hands on. I love to repower equipment with them. Ive got some parts engines in a 5 and 6 cylinder, a siezed 4 cylinder, one thats not siezed but I have no info on it in a air compressor, 2 of those generators now, and of course the 3610 and 6510 ditchwitch trenchers that came with them........And a new one comming this fall once I get the shack disconnected from standby. And 1 low hour lister 3cyl 7.5kva? i packed back from labrador. Hunting for some SAE #4 bellhousings and flywheels to repower a trencher and grader...... Sounds like you know a bit about the deutz's
@danconlan8735 4 ай бұрын
Looks like a pretty good deal! Slainte, DC🍀
@danconlan8735 4 ай бұрын
You truly are a man of many talents! Great work! Slainte, DC🍀
@Shopworx 4 ай бұрын
Thanks, I try, Ticketed in some trades and common sense for the rest.......
@danconlan8735 4 ай бұрын
Nice work and beautiful views there! Slainte, DC🍀
@danconlan8735 4 ай бұрын
Awesome workmanship! I’m glad I stumbled across your channel and I am now a subscriber! Slainte, DC🍀
@Shopworx 4 ай бұрын
Thanks. If you stick around you'll see a lot of Ford stuff, welding, some equipment refurbs, repairs and modifications, some of the few jobs I can take videos on..... And more.
@kennethcroll6972 4 ай бұрын
hi great to see back on the 6X6, you could maybe use the piece you cut of the corner to extend the edge of the corner to protect them ??
@Shopworx 4 ай бұрын
I mocked it up with them, some odd cuts of 2x6 and some other shapes. It just made it look more like a 70's off road bumper. I think it looks cleaner without.
@chrissweet6298 4 ай бұрын
Well ima Mr sweet and ima think ima watch this and ima go from there
@perryreding5475 4 ай бұрын
I was little skeptical when you tossed that 6x6 up there, but it came around with the spare tire carrier. Seemed too simple to be beautiful. I'm looking forward to see how you finish it up.
@tommydanger2564 4 ай бұрын
That unit is really coming together. Very nice!
@Shopworx 4 ай бұрын
Thank you! Slowly but surely.
@chiefbloodygrass 4 ай бұрын
If your going to make a rear bumper... You make a Real Rear Bumper... nice lad...
@Shopworx 4 ай бұрын
Well..... If your going to put the effort into making one, might as well make it tough. I'm sure some 16-20 year old kid isn't going to like it one day though....
@chiefbloodygrass 4 ай бұрын
@@Shopworx Well, it ain't for them... it's for a working man... lol
@PredatorOmnivore 4 ай бұрын
SARNING MUST BE WATCHED MUTED BECAUSE OF INAPPROPRIATE MIND NUMBING VOMIT INDUCING BACKGROUND MUSIC. What is wrong with you people who need this constant Tweedle Dum Tweedle Dee Ga Ga Pooh music inundating your feeble minds?
@perryreding5475 5 ай бұрын
Glad you're back. That whole "work for a living" part of life sucks. Much more fun to work on projects like the bronco!
@Shopworx 4 ай бұрын
Don't have to tell me about it.... However I do have a really cool job that allows me to go places all over Canada ( some good, some not so good) during the summer. That's why there's a lot more work done on the projects in the winter. Cant wait to get it finished though, and out on the road.
@tommygay8649 5 ай бұрын
Good to see you back. Keep up the good work. Good video.
@Shopworx 4 ай бұрын
Thanks, hopefully more to come, I had a few hours to get some welding and editing done...... Still trying to get better quality footage, with poor quality cameras, hate to bugger up the expensive ones with overspray, sparks, etc. Till next time
@punkinsgarageandpaint8299 5 ай бұрын
SO GLAD TO SEE YOU BACK ON KZbin! HOPE YOU BEEN WELL.
@Shopworx 4 ай бұрын
Yep, we've all been well, Just really busy. had to balance Work, family time when home and projects..... As you can tell which one that had to be cut...... I'll be picking away at it a bit till our Build out season is over then hopefully hit it hard again. Thanks for sticking with it!
@chiefbloodygrass 5 ай бұрын
Glad to see ya back... good news is, you got work and worx...
@Shopworx 4 ай бұрын
Yep. both are good to have. Usually when I have a lot of one the other suffers. Still on our busy summer season but hopefully on the next job I might be able to get some footage at work. The vast majority of what I work on I am not allowed to film anything more than the public could see. But cant wait to keep picking away at the 6 door. Thanks for sticking with....
@murraymclean5177 5 ай бұрын
Thanks Sir..👍
@theguyguy3528 5 ай бұрын
What did you use on the threads?
@Mike-z8j8b 6 ай бұрын
God bless you brother
@ReyMex-oy6ot 6 ай бұрын
What A/R is it .84 or 1.0 ?
@Shopworx 6 ай бұрын
It was the .84. Was told it would be best for me as I do a bunch of towing with it
@verticle2612 6 ай бұрын
Shawn/Sean? What did you end up doing with the 6510 regarding the engine? I have the same trencher in really good shape but the Wisconsin gives me a lot of issues. I want to put a diesel in mine. What worked for you and did it match up or did you have to do a lot of modifications? Thanks for the videos. Lou
@Shopworx 6 ай бұрын
Still haven't found what I'm looking for. They came factory with a f4l912 deutz as a diesel option. I am having a hard time finding one with such a small bell housing. I would like to go that way as it's proven in that application and is air cooled so no need for a radiator. Still depends on what I find first that works. I have other trenchers so not in a huge hurry. It was going to be one I leave in Eastern Canada so we're not shipping back and forth.
@ReyMex-oy6ot 7 ай бұрын
Can the KC turbo alone increase the power of my stock 1995 7.3 truck?
@brianbristofer-woods6788 7 ай бұрын
I believe the Donaldson has like 10 to 15 micron rating too which I believe is the best for what you can get for these trucks also a little tip if you take a punch and a hammer, you can poke a hole in the bottom of the oil filter and drain all the boil out into your pan that way when you take it out, it doesn’t make a huge mess
@baronrieker3404 7 ай бұрын
You have a fuel restriction most likely at the water fuel separator shut off valve.
@snowismas 7 ай бұрын
Nice work. I was curious about your 4x4 conversion. I plan to just run a D60 in front, Wasn't planning on carrying a spare anyways. So that solves the lug issue. The other is the parking brake, I can't do what you did, so will have to figure out something else.
@BruceMyersLBZ 6 ай бұрын
I ran a manual hydraulic line lock off rear brake line off master cylinder, works much better than any factory parking brake but i dont trust it sitting for any lenth of time, over 3 years with it, still holds, never bleeds off/ leaks off over time
@stewartoates3987 8 ай бұрын
When l first got mine with the same motor as this l was surprised how much they can push, love the front blade on yours.
@Shopworx 8 ай бұрын
Haven't really use it much yet. Was to light for pushing clay. Picked up a bigger champion grader, a 562. I would like to repower this 503 with a different diesel..... A air cooled deutz or possibly a 3-53 Detroit, or a decent Kubota.... Looking for the right engine for the right price. Then the ud236 will get transplanted into the older 503G that currently has no engine.
@stewartoates3987 8 ай бұрын
My no different to start at all but good most of the day tto restart
@stewartoates3987 8 ай бұрын
Yes you have to glow them for a long time, after seeing this it may not be my glow plugs
@stewartoates3987 8 ай бұрын
Im in Australia and mine takes that long to start unless l hit it with a taste of start ya barstard which l dont like using. Im looking for glow plugs and rail and address would be appreciated. Love your videos mate
@stewartoates3987 8 ай бұрын
Top little grader have one in Australia everything the same except the front blade. Love to know where l can get glow plugs for it. Thank for the video
@Shopworx 8 ай бұрын
I'll have to check out some info when I get home. In the summer I fly all over Canada working on aircraft navigation aids so everything is hit and miss. I'm sure I ordered them from my local diesel injection specialist so I should have a receipt somewheres
@user-pc3cf6xw2h 8 ай бұрын
What weight oil did you use?
@johnanderson6630 8 ай бұрын
Do they tow ok with a car on
@Shopworx 8 ай бұрын
Pulls good. Hauled a ranger full of scrap steel on it, a 9 yard dumpster and a ATV on it behind my 5th wheel RV. Also behind the same travel trailer I haul a 4 seat Yamaha wolverine side by side and a 660 grizzly on this flat deck. Just about any trailer will pull good with any load if you know how to position it properly for weight.
@mattjensen7989 8 ай бұрын
Love the build. You must have the only 6 door bronco. Im looking to do the pickup... how long would you guess you spent on whats covered in this video.. all the metal work?
@Shopworx 8 ай бұрын
I believe I spent about 3 days on the cutting and welding of the body's. 4 max. John was around to help line them up as I brought them in. It's the finishing that takes forever. All the little details.
@CliffordTheBigRedBronco 9 ай бұрын
Is this the stage 2 63/73? What injectors do you have
@Shopworx 8 ай бұрын
No it's a stage 1. I do Alot of heavy towing and everyone I talked to said that would be best for my application. Overall it dropped my EGTs about 300 degrees without running the water meth or my chip. Turbo gets into it a bit lower in the Powerband over stock and averages 3 to 5 psi higher boost Injectors are Baby swamps. 4" turbo back SS Diamond eye 6.0l intercooler. DIY electric fuel with regulated return
@danielbrown5027 9 ай бұрын
Throttle position sensor code
@johnscheffler1514 9 ай бұрын
I'm really liking this project. I know im late to the party I really wanna skip to end and just see it finished but I just watch a video every night or when I get time. In working on my 96 crew cab. Just new fenders core support box etc. Kinda a face lift. Michigan salt is tough on stuff here. Keep up the good work. I'm gonna try then Blair spot weld cutters you recommended. I looked you didn't have a amazon store at least I could find. Keep up the good work.
@Shopworx 9 ай бұрын
Ha ha....if you skip to the end it's still not done... Still working on it. Got a few new videos for it half made but waiting on parts to complete them. Thanks for following along with the build. I've got a few other OBS ford videos like my crew cab resto and the f-superduty dump truck. We get the same rust issues up here from all the sand and salt as well. I've tried different spot welds cutters over the years and like those the best. Take care and best of luck with your project. If you have any questions send a message, I'm on Facebook too. I've been wrenching on these since they were made....