you should vacuum those drill shavings so nothing gets a short circuit..

Thanks for the video

2:41 Yeah with those high-end cameras especially the next image 10 it can be a bit troublesome but if you do it with something like a canon camera or just your phone it would be not too hard

You just saved me 100$$$ thank you very much! mine was different but on the back side of the board was labeled 12v!

Thank you for this amazing video sir, i do here some people got issue when they put a dslr on the telephone it were to heavy and make the scope / mount run down, some have it only 1 time but all seem worked normally after that, is that happen to you sir ? I would love to hear your reply

HI BOSSS!! GREAT VIDEO AND GREAT PICTURES , just one cuestion, you did the mirror modify to get those pictures ? or just with the camera ? i have thge same model and canon 550d but im scare to move the mirror... what you recommend ? thanks boss and clear skyss

I just burned my tv by following this tip. How do i repair it now. Where can I buy a PC board for 32 inch JVC model LT-3N355. Please someone help

You need to do more videos. Which I saw this earlier and would like to see more of your videos. Straight up and plan explanations. You should do a series of video classes on astrophotography for the everyday yard hobbiest. I have this same telescope and Im trying to do astrophotography and had no idea you could get these results. Awesome video my friend

Thank you for the video, I bought the same one.. Thank you brother ✊😎

I hooked the 12v up to my 100mh lithium battery and it didn't work.

2024 July hows the antenna presently ??

Hi, thank you for the video. I want to ask something. How can I choose the adaptor of canon 600d for celestron 130slt

Where do you get the micro plug from? I think you said JS10

Doesn't vacuum the board and bingo a short is born. I cannot believe it.

😍tysm for this vidoe

What's the size of that plug I bought the jst micro plugs from Amazon and there really small..any help would be greatly appreciated.

How did you track it through the night?

1. This is not easily done on most TV sets now and you will need to know where to look on the PCB for a spot to tap on to if such a spot exists for 12 volts. 2. Maybe put a diode inline of the positive to prevent backfeeding voltage up the 12 volt lead while using 120 volts. 3. You should put a protective grommet or strain relief on the cable where it enters through the metal chassis.

That's a pretty sweet deal I'm surprised

Mostro todo lo de aserla funcionar con 12 voltios es lo de menos pero no enceño como ISO para iluminar las regletas led como las alimento

Gracias

thank you

doesn't work on Vizio 32" D32f-J04 .. power light flashes but screen doesn't turn on.. seems like LED driver is powered separately

I realise this an old video but did anyone open the back and find that their plug had 4 pins instead of 2? Two marked 12 volt and two marked ground? Any help appreciated

Great info dude ❤

2024 Feb hows the antenna holding out ??..

Hello everyone !!! Does anyone have a reference or link for the connector? Thanks a lot

Great videos man

Liget 12v what amper do you use 12v

Thatts amazing !!! You modify the telescope ? I hope not

Hi sr!! To get the pictures you used any barlow or eyepice ? Thanks for video boss

I recently bought this scope off the marketplace. It would be really nice, if you made a video on how you took these deep sky images. And, what kind of bottle skies, do you live under?

Where did you get the JST micro plug from......

Great video. Just placed my order for a 130 SLT. Excited to see how it goes!

My hat galaxy 😢

Thats simple !! good video thankss

Thanks the Video !! I buy yesterday this telescopie i hope ill like. 🙌🏻

ZWO told me I would need at least a triple refractor, the one they mentioned ZWO FF65-APO $899.95, ZWO AM3 Harmonic Equatorial Mount $1499.00, DSO cooled camera ASI533MC Pro (color) $719.10, ASIAIR PLUS $269.10, ZWO EAF $179.10, oh, I am sorry, I don't have $3566.15 just lying around for me to spend. Obviously I don't want to play it cheap, but when your on a budget, well if you don't stick within your budget, that's how you wind up bankrupt and I don't want to wind up bankrupt just because of a hobby I am trying to get into. I was told by both celestron and ZWO reflectors are not that good for DSO photography, but you sure did show them and made my decision easier.....Donny

Can.you.splice the wires together or do the have to be soldiered

I bought a Celestron 90 SLT telescope but had to return it. I have bad sky and cataracts and could not see two stars, so I could not align the scope. I then bought a Sky Watcher Sky-Watcher Virtuoso GTI 150P Collapsible Tabletop GoTo Dobsonian Telescope. It uses the SkyAlign application. To align you select a star or stars from a list and the scope slews to it. You then manually adjust if needed. I cannot see the stars without the scope, but they do show up nicely in the eyepiece. At $470, you get a 150mm Newtonian reflector and a go to mount. You do have to make a shroud which costs about $8 and takes 30 minutes and you will want to make a new focuser which costs $92 and takes 5 minutes. Took it out last night and took my first pictures of M31 and M27. Came out okay, but not post worthy.

Didn’t work on my power comes up but screen is blank

You can just get an inverter but regardless good video usefull as inverter step up will use up a bit more power than directly to 12 like this

Looks great to me!

How's it holding up?

Great info. I have an old 32" Hisens that I would like to make 12V for my RV. Hope it has a similar board in it.

Good evening. Do you know if it is possible to connect the nextar 130 to the phone in the stellarium?

Can you make a video on how you modified the 130slt

Good to know, I would try this for sure 👍👍👍 I would just recommend to avoid all theses little chunks of metal from the drilling to get to the PCBs and connections 😅 😛 I 'd rather pierce a hole into the plastic casing then in the metallic support...

i have a 130slt and it goes to the target but then slowly starts to go out of frame. How do i fix this.

So cool