The example given is more of an exception rather than the rule. The description sounds like the driver was throwing the car into park before fully stopping which is asking for trouble. Placing the car in park when fully stopped without setting the parking brake is what most people do and will never see a parking pawl failure. Being a common practice and parking pawls being one of the least common forms of automatic drivetrain failure, that not using the parking brake will cause premature failure is not supported by fact. Additionally using the parking brake, especially on a steep incline, is a best practice. Issues with the linkage, a worn spring, or neglected fluid can all contribute to a parking pawl not fully engaging and allow your auto to go on a solo trip when you walk away with a chance at damaging almost anything other than the transmission. I can appreciate the good advice given, but when the logic behind it is unsupported by fact it undermines the credibility of the good advice.

May Your Hands Be Blessed In The Name Of Jesus 🙏

I have a 2 stroke concrete breaker, starts on the button and runs fine, but when I shut it off it wont restart. Any ideas

The main jet pulls apart

The horseshoe shape for ohms 😂

Do all two-cycle carburetors have to have a hose running from the gas tank to the carburetor? I bought an old weed eater it won't start I cleaned the carburetor but I don't see a hose running from the carburetor to the tank so I'm wondering how does it get gas?

Wow, now i can put it back together.... tank you so much!!!!!!!

Good video and description I just gotta say that stupid musick helps no one! Makes it difficult to hear you speaking.

If anything you get a little workout in by shaking that battery

For about ten bucks you can buy a simple spark tester - it connects to the top of the plug and other end into the female plug wire boot. In between is a light which will light up with each pulse of electricity going to the plug. It won't tell you if the plug is bad, but it's the fast and simple way to verify that the coil is functional. I bought mine at Harbor Freight, but I would guess that any auto parts store would have one.

what is the difference from the first one and the second way?

You can work on my house any time. Nice job!

You put the baking soda in the battery. It can spit out and burn your eyes. Batteries are the leading clause of industrial blindness. You never wore safety glasses once how many people do you think? Did this in their backyard and had eye damage or watching your video, not really responsible on your part was it should award safety glasses

I got a Husqvarna 330lk new n a few months later n it won't start n once it does it pops n dies n won't start until next day or few hrs 😢 HELP PLZ

I was so hoping this was the issue with mine, especially coming across this video because my washer looks so similar! Except the smiley face’s mouth where the clicky thing hides is a bit rusted out on mine. Anyway, I was able to follow the instructions but unfortunately no luck. I can click down on that piece through the mouth without a problem. I took a sharpy and marked the middle column and it does not appear to ever spin. So water seems to drain overall but the clothes are soaking wet and water ends upon the bottom of the spinner. Any videos on a possible fix? 🤞🏻

21nov24 great presentation. Thx for making the effort. My explosion can now be rectified as well. 1:13

These new battery in the passes 6years r dieing ALOT FASTER so we all gotta buy more batteries ever 2 to 4 yrs replace

WOOOOW U fried the battery wen u put it on ENGINE START WOOW that's not for charging ENGINE start ENGINE start u leave it on for 10 to 15 seconds OMG Have u ever had a battery BLOW UP Everything u r doing it not good ... but iam gonna LIKE 👍 the video 📹

WOOOOW U fried the battery wen u put it on ENGINE START WOOW that's not for charging ENGINE start ENGINE start u leave it on for 10 to 15 seconds OMG

Side engine start means u put it on that wen u trying to start a vehicle it a BOOST BOOSTER WOW THAT'S scary as hell JUST PUT DISTILLED WATER &MOVE ON

For anyone reading, it seems most cars are constructed very similarly. I had to do this on a Mazda 3 and the disassembly was very similar to this video. I now have to do it on an Infiniti and again it is very similar. So don't be afraid to tackle this job, it's really not difficult. Just be patient, take pictures of each step so you can remember how things went together, and you'll be fine.

Shouldn't you bring the tension to both springs back to zero to make sure you have the same number of winds on each?

Yes!!!! Tyvm!!!!

Hello. Mines not starting, ive changed fuel lines,filter, spark plug,cleaned carb could it be the carb adjustment screws?

Very informative diy repair video! Step by step, how it works, tools to use, things to watch out for, where to look for the source of the problem, and the part to replace to restore functionality. This is KZbin at its best!

I was having issues with my door slamming shut during the last couple inches before it touched the floor. I started watching the springs as the door closed and right before the door hit the floor the springs would pop and shift. Because of that, the door would sometimes open itself back up. So, upon doing some research, Google told me that maybe the springs need adjustment. I came to this video and you mentioned the possibility of the springs binding up. Something I never thought of. So I soaked the springs in WD40 and it completely solved the problem. With a little bit of lube, the spring coils don't grind each other and the door closes smoother than ever.

Better than average video. Straight to the point and good video.

You have to prime first. Full choke two pulls half choke to start. Helps if you can read.

I was given a br 430. They replaced the carb along with a tune up. Plugs, filter etc. It will start but won't run without choke. It might run half choke.

I'm just going to put wd-40 into a spray bottle.

Thanks! I will try that.

I used this video to fix my dryer, thank you so much!

I have near identical machine (Rover R2650 looks exactly the same) with carby issues. It is a Walbro carby, stamped WT1116 which makes it a WT-1116-1 model. It is not possible to obtain the correct service / rebuild kit here. The Walbro site says to use kit K11-WAT and I've been informed locally to use the K10-WAT. The pump side gaskets and diaphragms in both of these kits only have holes in 2 diagonally opposite corners, however, the WT1116 is fitted with parts that have holes in all 4 corners as it has 2 screws and 2 locating pins. Would you have any experience with this issue? The alternative is to replace the whole carby using a WT-973-1. I'm awaiting a set of mixture screw adjustment tools to see if I can get it to run at high revs. It starts and idles but just bogs and dies as soon as you squeeze the juice on. It will run high revs if I spray fuel into the throat, which suggests to me it is starving for fuel through the carby. Filter is fine, cap is good, new fuel etc, and it is a relatively new machine.

THANK YOU SO MUCH FOR THIS VIDEO! I don’t think I would have passed small engines class without it.

Great video & info... thank you!! 👍🏼 #1

i do first in neutral then e brake than release brake and in park

The troubleshoot booklet is hidden inside the machine . behind that America decal . I found out that if the drain pump jams , the machine will not work .

Thank you Sir.

finger pump bottles work great.waste less product also. no need to do this. but nice to see done..

I would have bought a battery a week ago I think that's how long it took him to try redoing the battery

Your assumption that it was blocked because you couldn't blow through was wrong. The needle valve was closed until you took it apart.

You can use brake fluid to clean the tank

go buy a new battery

Good vedio and informative

How do you do a maintence free battdry

Load testing drained it. filtering acid is contaminating acid. Probably would have started engine. Good information of what not to do.

Well done. I learned a lot.

I appreciate you my man!

💗💗

So did that replacement kit hold up after the first one failed? I'm on my second failure and need to decide which kit I am going with. Thanks so much for your videos!!