So many conflicting reports that the obsbot does not convert the Osmo 3 signal to HDMI, so thank you for doing this test (but I'm still hesitant on picking up the obsbot).
@EmeraldAudiovisual9 сағат бұрын
You should NOT pick up the OBSBOT one. The video was recorded before the firmware update of the DJI Osmo Pocket 3, that added the 4K profile to UVC. The OBSBOT does not work since that firmware upgrade. Neither does the RGBlink TAO. The Link-Pi ENC1 V2 or V3 is the only solution that currently works reliably.
@KuboriKikiamShow8 сағат бұрын
@@EmeraldAudiovisual Oh wow, thank you very much for the heads up!
@starsandnightvision2 күн бұрын
The problem with the OBSBOT is that it is EXPENSIVE!
@EmeraldAudiovisual2 күн бұрын
The OBSBot adapter also doesn't work with the DJI Osmo Pocket 3 anymore, since the Pocket 3 firmware update with the 4K capability. So it's not an option anymore.
@GamblewithJimmy3 күн бұрын
Just subscribed because you seem very knowledgeable. Question for you I'm using the pocket 3 as a webcam. What exactly would the convert from usb to hdmi actually do? What is the point of doing that if you don't mind me asking?
@EmeraldAudiovisual3 күн бұрын
People stream with the likes of the LiveU Solo, Solo Pro and Kiloview P3 encoders with multiple modems, load balancing and link aggregation to avoid going offline and giving a better experience to their viewers. But these encoders can only take HDMI or SDI as input. There is also a use case, where you maybe would want to bring the camera output into a HDMI switcher like a Blackmagic Atem Mini, which also can't take a UVC feed.
@GamblewithJimmy3 күн бұрын
@@EmeraldAudiovisual ok so better power and connection. This is so helpful appreciate it. I'm going to convert the UVC to HDMI output for the atem mini pro that way i can get a few of the pocket 3's to do a multi camera switch stream
@EmeraldAudiovisual3 күн бұрын
@@GamblewithJimmy Please be aware, that after the last firmware update of the DJI Osmo Pocket 3, that introduced a 4k profile on UVC on that camera, the LinkPi ENC1 V2 (and V3) are actually the only devices, I found to be able to do this conversion. The OBSBot 2 and TAO RGBLink don't even work for the DJI Osmo Pocket 3 anymore.
@GamblewithJimmy3 күн бұрын
@@EmeraldAudiovisual what i am going to do is this: Logitec USB webcam streaming adapter has DC 5V , Start Stop Record, IOS, Webcam Input, UVC output, Hdmi output, storage. It's perfect to use for the HDMI output for Atem Mini Pro. Can connect to Big TV monitor for the camera views and to the lap top for the obs view
@ZeebraATX6 күн бұрын
WOW!!!!!! This video opened up a whole new world of GoPro. Had NO IDEA that there was so much more that you could do beyond the settings screen of the camera. This is going to lead me down a rabbit hole of modifications . THANK YOU
@JB-nm2sv10 күн бұрын
I was able to get this setup to work with my DJI Osmo Pocket 3, however it only works when I am connected to my home network. But, when I’m not at home and use my mobile hotspot to connect my DJI to the iPhone to start the livestream with the Mimo app, it fails to connect. Would I need an external service like Belabox for it to work? Some people I have talked to indicated that they used a router only and it didn’t give them any issues but they were on an Android phone. I am also wondering if the iPhone and/or carrier might not allow the port forwarding. @emeraldaudiovisual
@daleyjohnmusic812511 күн бұрын
Followed tgis video and i go live on moblin but my twitch is not live? Do i need obs on phone ?
@EmeraldAudiovisual11 күн бұрын
You can stream directly to Twitch from Moblin, but the settings would be different. You would need a scene with RTMP and you can not use HEVC, as Twitch does not support it at the moment.
@michsky4612 күн бұрын
this can work with sena too?? intercom in helmet I mean
@EmeraldAudiovisual12 күн бұрын
I don't have a Sena intercom system, but as far as I know, it can connect to a mobile phone via bluetooth, so this should also work with the Insta360 cameras, yes. I've never tested it though.
@WATCHHOLLIE12 күн бұрын
Hi! What did you fix when it said "2,000 years later". I am having the same issue. I followed your steps perfectly.
@EmeraldAudiovisual12 күн бұрын
I just had something misconfigured. If you followed the video, it should all work, so you might want to recheck your settings.
@WATCHHOLLIE12 күн бұрын
@@EmeraldAudiovisual Hmmm, i've watched it many times and checked and re-checked. I even have tp-link too. I've deactivated my firewall. What did you have misconfigured? Thank you SO much! I've been working on this for hours
@EmeraldAudiovisual12 күн бұрын
@@WATCHHOLLIE I had my OBS PC on my work network and not my test network. As I said .. guaranteed not the same problem, you're having.
@joshmills75413 күн бұрын
Bro, thanks for the 2000 years later. gave me a chuckle. Awesome tutorial!!! ❤
@Jipseekid16 күн бұрын
YOU LEGEND THANK YOU :D
@87andsmith20 күн бұрын
what does the audio video sync toggle do exactly?
@EmeraldAudiovisual20 күн бұрын
It means that when you start recording on the camera, it will start recording on the mic transmitter. You then don't have to do it yourself (and it's often something, that one forgets to do)
@CodeX8622 күн бұрын
Is there a way to get a 4K output?
@EmeraldAudiovisual22 күн бұрын
Not via USB. If you want 4k, you will need a HDMI cable and then capture the output with a 4K capable UVC capture dongle.
@CCozart27 күн бұрын
Dude, dude, dude, you killed iit ...excellent review. I'm just setting my connect with the Ninja V+, and will you this video as a great reference.
@Senthiil29 күн бұрын
Thank you for the informative video. I'm interested in finding a device capable of generating timecode and key input signals, which can then be sent to a GoPro via a 3.5mm jack in mediamode. Could you please advise on the availability of such a device?
@93FrICeZ29 күн бұрын
Id like to know if you have advice for me :) If I connect the Osmo Pocket 3 to my phone via RTMP in Moblin and then stream it from Moblin to my OBS setup at home, the outcome in obs is really laggy :( How can I connect my Osmo Pocket through Moblin to my OBS without any lag and ensure a smooth transmission? I dont use Belabox just the smartphone using moblin
@kaliberswissАй бұрын
Hi quick question , dose it sync the gopro 12 exactly , like to the millisecond (Genlocked) ? or just the timecode?
@EmeraldAudiovisualАй бұрын
Genlock is different from Timecode. Genlock would be continous. This is just a once off timecode jam and yes, it will drift over time, so I'd resync the GoPro every 3-4 hours.
@ArloisLuckyАй бұрын
Hey can you tell what was wrong with the home external im facing the same issue
@WATCHHOLLIE12 күн бұрын
Did you ever figure it out?
@ArloisLuckyАй бұрын
hey i cannot connect to server even after this can you help me?
@WickedSheepLPАй бұрын
for me the footage of the Action 4 looks much smoother
@juddlynnchannelАй бұрын
If I have an Insta360 One RS on a chin mount, and an X3 recording on a stick from the rear, how can I use verbal commands to start/stop them both? Does this require one wired lav mic (to the RS), and one bluetooth lav mic (to the X3) tucked inside my helmet? Is there a more simple way? Thx
@Ragesh-ho1eqАй бұрын
hello... can we use lightning to multiple usb A connector and connect multiple usb 4g dongles..? and strengthen the uploading speed through network bonding in Moblin. will thiz works...?
@EmeraldAudiovisualАй бұрын
It looks like you didn't watch the entire video, because I did cover that. I've managed to get 2 USB-A modems to work with specific Lightning adapters, as long as the two modems were not of the same brand. That seems to be the max.
@Ragesh-ho1eqАй бұрын
@@EmeraldAudiovisual i watched this video not once but multiple times , its a doubt that how iphones recognize and bond multiple usb dongles.
@EmeraldAudiovisualАй бұрын
@@Ragesh-ho1eq Ah. Now I understand, what you want to know. Moblin uses a special protocol called SRTLA, which was developed for Belabox. It requires a SRTLA relay (either hosted by yourself or by subscribing to Belabox Cloud at $10/month) to achieve bonding. Moblin can with that access all network interfaces, that your iPhone has, at the same time. That is the internal data, wifi and modems via USB. So far our testing shows, up to 2 modems can be attached to Lightning based iPhones and iPads. On USB-C iPhones and iPads you can attach even more using a USB hub.
@Ragesh-ho1eqАй бұрын
@@EmeraldAudiovisual thanks , this is what i am looking for , thanks once again for enlightening me.
@gurugamer8632Ай бұрын
What is best power bank for GH7?
@령익Ай бұрын
Did you connect to orange pie with c to c type cable from your pc? I don't understand how the file was transferred
@KensakuDekuАй бұрын
So the iPhone can consume connection right from the usb-modem with this adapter?
@danielcottmain4035Ай бұрын
Thanks for the video … I want to set up a very simple video with TimeSync on my iPhone 15 Pro Max that I can then hand over to someone else to video me (… it needs to be simple or I would be asking about the BlackMagic software). Can I get TimeSync into the Apple iOS video recording software? Thank you
@RazaNorthАй бұрын
Hey my home connection is a bit slower (11MBPS upload speed) than my IRL streaming phone, which is using Verizon. I have both of them set to 6,000 KBPS for iRL streaming (I'm self hosting on my PC). However, sometimes I get a freezing stream. Do I need to raise the KBPS on my PC or on my phone?
@KensakuDekuАй бұрын
Did I understand correct - bonding works only if I use belabox?
@EmeraldAudiovisualАй бұрын
Belabox Cloud. There are two components to Belabox: Belabox - the encoder and Belabox Cloud - the bonding relay. Moblin uses the same protocol as Belabox, so you can use Belabox Cloud to achieve bonding with Moblin.
@gregoryIT20 күн бұрын
you can use own Srt(LA) server and bonding will works too
@KensakuDeku20 күн бұрын
@@gregoryIT yeah i figured it out, thanks
@ArenaMobilАй бұрын
My DJI Action Cam 4 uses a case from Talesin, does using a mic adapter require removing the Talesin case???
@Dili832Ай бұрын
What’s the difference between leaving it like this and using a capture card?
@EmeraldAudiovisualАй бұрын
The fact, that you don't need a capture card to begin with. It's build into the camera.
@Dili832Ай бұрын
@@EmeraldAudiovisualyes I know I’m asking if there’s a quality difference if you do use a capture card
@EmeraldAudiovisualАй бұрын
@@Dili832 The EOS R6 Mk II will only output 1080p30 (or 1080p25 depending on where you are). If that's all you need, then there is no difference. If you want higher fps rates or bigger resolution, then you still need a capture card.
@Dili832Ай бұрын
@@EmeraldAudiovisual thank you for the reply!! I guess there’s no point getting a capture card if you’re using his camera as a webcam right? Would probably overheat at higher quality
@령익Ай бұрын
it is not real hdmi streaming and not support 60p
@esomohanoАй бұрын
(minute 4:30 on this video)..!! I've just seen another video, where they showed the proper way to pair the DJI mic 2 with the Pocket 3. The DJI External Mic has 2 different way to pair. To pair with the reciever, you need to use the green ligth mode, & for the Pocket, you need to switch to the Blue ligth mode. In order to switch from one & other, you need to star the pair process, pushing the pair button, after that, press the record button for 3 second to change from green to blue. Then the pairing process with pocket 3 will start. While you maintan this mode on the dji mic 2, every time you turn on the mic & the pocket, they will be paired. This is great.!! But as soon as you need to pair again with the DJI mic reciever, you need to go back to the green ligth mode, & you need to do the same proces. Push the pair button, & then the record button to switch from blue to green, & then you will pair the reciever with the mic again. Hope this info helps you & your suscribers. God Bless you all..!!
@MaxCycling7Ай бұрын
I want to add GPS overlay in my 360 video live stream or want to show strava app running anywhere during video...Can it be done?
@588ta2 ай бұрын
Your putting me to sleep.
@djwiznz2 ай бұрын
Hi, thanks for explaining and showing,I have a jetson nano 4g from seed which has no sd slot, it has an old version of belabox from 2022, i have done the flashing onto a usb stick but when I connect the jetson to HDMI it shows a login so cant go any further to install. Is there another way to install the new update?.
@eddiekytia2 ай бұрын
I'm looking for help that cannon couldn't give me. I want to go in bulb mode and lock shutter open untill IM READY TO CLOSE witch I can physically do on the camera but I don't want to touch the camera. Do you know of a remote that will allow me to start shutter with a press then end shutter with another press. This is for light painting photography on canon r6 mark ii...... thanks so much for your help
@muhdistyarmeizhay9392 ай бұрын
note supported to hero 8 ? ( clear hdmi setting )
@mohamedhedinafti74082 ай бұрын
very nice video...however i wonder if there is no risk such as getting hacked as the ip address will be shared...im not so techy
@xtinawhat56262 ай бұрын
Thank you!
@greatfallskam2 ай бұрын
New Insta360 ONR RS Twin Edition owner. Beginning to learn my camera. Just finished my first Insta360 Studio and Filmora video production. I used my AirPods for recording tracks post production. However, I noticed the voice tracks were in mono ( not stereo ) and poor quality. I mostly shoot on and my motorcycle. Is something like the InstaMic simplest solution to record without all the wires, shoes, clutter? Does it record in stereo? Can I also use the InstaMic for recording audio ( my voice ) tracks while using video editor or should I get a wired cavalier mic for that? Thank you for your videos. Very helpful.
@9php2 ай бұрын
If you only care about a BRB scene and none of loopy's other features, you can skip loopy and just put the sources from your BRB scene underneath your stream source in OBS. When the stream source loses connection, it stops blocking whatever you put behind it. Of course you would still want a separate BRB scene to swap to manually, and this doesn't work if you want audio or music to play during BRB.
@EmeraldAudiovisual2 ай бұрын
The issue with that is, that it only can be static content. You won't be able to play clips or the likes, because their audio would constantly be playing while you're streaming. You are correct though, that that is one of the simpler ways of doing things, if your BRB screen just is static content and no audio.
@lilskamlive2 ай бұрын
please help me i did everything u said but it doesnt switch back to the main scene when it reconnects
@bartlomiejkaczynski88592 ай бұрын
I don’t have that option nditx in output menu…. Any advice?
@bnilo2 ай бұрын
I use the GoPro Labs firmware update and it is really good for what I do. There are many added features that put it above the standard model. In particular, I like is the built-in timecode sync which allows me to use multiple cameras in my videos. The QRControl App saves a lot of time to set multiple cameras’ settings
@lets-do-this2 ай бұрын
I did not understand how u connected the osmo action to the rtmp server ...did you need to bring the stream over the mimo app into moblin? Or did the cam just connect somehow?
@EmeraldAudiovisual2 ай бұрын
You always have to start RTMP out of DJI cameras via the Mimo app. Otherwise the camera would not know, where to send the stream.
@lets-do-this2 ай бұрын
@@EmeraldAudiovisual makes sense...and I tought so. SRT would be a great addition to the mimo app...would save a ton of workarounds
@Ficktao2 ай бұрын
You mentioned that if you have the ATEM MINI, use the ATEM MINI, but then still you need a HDMI out on the Pocket 3
@EmeraldAudiovisual2 ай бұрын
I'm not sure, what you mean. The LinkPi provides the HDMI from the Pocket 3 out to the Atem Mini, if needed. The whole point of the video is, how you can connect a DJI Osmo Pocket 3 to either an Atem Mini or a LiveU Solo.
@gergbyte67752 ай бұрын
This is helpful, but 18.04 isn't an option for Oracle cloud anymore.
@R6killr2 күн бұрын
Did you ever find anything out about this. I'm running into the same issue where 18.04 isn't listed anymore.
@gergbyte67752 күн бұрын
@@R6killr Yeah, I set up the relay using my own VPS with 18.04 installed. Let me know if you need more help.
@gergbyte67752 ай бұрын
What are the SRTLA settings? You can't fire up the encoder with nulled out srtla relay params
@damumbler2 ай бұрын
Thanks so much for all of your videos!
@corlissmedia2.03 ай бұрын
What about the Canon MA400?
@raczyk3 ай бұрын
Why not just use the onboard sim. Is 5g not good enough for streaming?
@EmeraldAudiovisual3 ай бұрын
It's using the onboard SIM ... and the WiFi ... and then up to 2 more modems. And no, a single SIM is rarely enough to keep a stable stream, if you're on the move. Sure, if you are static in one place, you know fairly quickly, if it's going to work or not. But the idea of multiple data connections is, so that you can have SIMs from more than one provider and your stream doesn't go offline, if one of the SIMs ends up with a bad connection.