Пікірлер
@TheKinderdoc 4 сағат бұрын
I notice that you tend to miss the upper right corner when you rub a finish on the tile with your finger. You cover the other corners 3-4 times but only hit the upper right corner once.
@larainewoodruff3739 21 сағат бұрын
I saw that video about your using mod podge more now and am going to try that. It looks amazing. Thanks !!
@annahann313 Күн бұрын
Thank you, can I varnish my piece with Liquitex varnish please?
@larainewoodruff3739 3 күн бұрын
Do you recommend a technique for applying gel medium when it’s a larger surface? I’m using unfinished wood planks and using finger isn’t practical. The foam brushes are meh. Thanks !!
@imagetransferswithrix 2 күн бұрын
Those are the only two ways I apply it. Foam brushes or my finger. The finger is just to make sure you have 100% 'wet' coverage (not dry or tacky) and there are not hard bits from the lid of the container. You may want to watch my most recent videos on using Mod Podge after spray protecting the transfer paper. Then you can be a little more liberal with the glue (Mod Podge) and use the foam brush (or whatever you like) to apply it.
@larainewoodruff3739 3 күн бұрын
What kind of white paint did you use?
@imagetransferswithrix 2 күн бұрын
Any white paint that will stick. You can also use Gesso. I really don't pay much attention to the type of paint. I'll grab whatever is on the garage shelf. You may want to test though.
@SamLeaArt 3 күн бұрын
I should have watched this before I created my Van Gogh piece. How do you feel about those T-shirt image transfer paper using iron?
@imagetransferswithrix 2 күн бұрын
You mean iron onto the canvas? Not my first choice. I'll stick to the QT paper.
@larainewoodruff3739 3 күн бұрын
I’m going to order some of your paper. I’ve done many photo to wood transfers in the past and had great success but just did 6 fails and have no idea what went wrong. I had the photos printed at FedEx as usual, used unfinished wood planks as before. I used mod podge and then Liquitex. All images had major problems adhering and I’m starting to think the copy paper being used by FedEx has changed somehow. Or perhaps the unfinished wood planks are treated with something that’s preventing the images from being transferred. I’m pretty frustrated and also done with the rubbing method. How quickly does your paper ship once I order and what is the shipping method? Thank you !!!
@imagetransferswithrix 2 күн бұрын
Thanks for your order. Looks like it's shipping today! Ships USPS. I don't blame you for being tired of the rubbing method. As for the 'adhering' issue you are having, are you saying that the image is coming off when you RUB? If that's the case, then you should have better success with the QT paper as you won't have to rub. However, if you are having a problem with simply gluing your paper to something, that's a different issue. With the QT paper, you will need to be able to glue it to the wood. No need to rub it, but you do need to glue it. Let's see how this works out for you. :-)
@user-qd2vb2uf7p 3 күн бұрын
My husband is a tree cutter….he also cuts pieces up for weddings…but he said u have to do it the day before…if u don’t treat them…
@DianaLopez-j9d 10 күн бұрын
What is the hand held heat thing
@imagetransferswithrix 10 күн бұрын
Heat gun.
@camilledugas3428 10 күн бұрын
Where do I get Quick transfer paper, would love to try to make the tiles
@imagetransferswithrix 10 күн бұрын
rixcandoit.com
@constance9789 12 күн бұрын
Thanks for your time, have you come up with a cheaper way to color these images?
@imagetransferswithrix 12 күн бұрын
Color the images? Don't know what you mean. These are laser printed images.
@cherylnewton9511 12 күн бұрын
Got my paper in now I will get to transferring....thank you for the clarification 😊
@imagetransferswithrix 12 күн бұрын
Wonderful!
@martinmccartan739 14 күн бұрын
Has Rix left you tube ?
@imagetransferswithrix 13 күн бұрын
The rumors of my demise is greatly exaggerated.
@TheStanman99 15 күн бұрын
Just tell us the secret 🇬🇧
@imagetransferswithrix 15 күн бұрын
Sure. CoatingFormula=( γα⋅β 2 +Δ Θ )×( μΩλ∑ i=1n π i + τ+ΦΞ ) ϵ You're welcome. 🙂
@ladysparky49 25 күн бұрын
Would this transfer method work on an already collaged surface
@imagetransferswithrix 16 күн бұрын
I would test it. You want a nice flat surface. The rule of thumb is that "if you can glue paper to it, you can transfer to it."
@And.r_Art Ай бұрын
Thank you!!! Couldn't find a straight answer on this topic till this video! trying to turn my artwork into paint by numbers to give the locals a fun Tuesday evening activity with their coffee ❤
@imagetransferswithrix 27 күн бұрын
Glad I could help. Just finding different ways to use transfer paper.
@TheStanman99 Ай бұрын
Really interesting, was the print on glossy paper 👏👏👏🇬🇧
@imagetransferswithrix 27 күн бұрын
The print is on my transfer paper. It's not ordinary printer paper, but 'super' printer paper. 😂
@awfullyperson Ай бұрын
I learned so much from this video. Mega thanks!
@imagetransferswithrix 27 күн бұрын
Mega thanks to you as well!
@Woodchucksigns Ай бұрын
Rix did you say if is not completely dry, it could end up with spots? I did a few pictures on the 4” wood, let them dry and ended up with small pin hole size spots on most of the finished product. One I sprayed with coating spray (Kamari). I adjusted it to fit the wood.But spots and not a good picture on both. What ya think?
@imagetransferswithrix Ай бұрын
Do you see parts of your image left on the transfer paper that matches those dots you have on the wood? If so, then those spots were NOT glued down. Either missing glue, poor contact, or glue not dry in those areas. As I always say, IF ANY PART OF THE IMAGE HAS NOT TRANSFERRED AND YOU CAN SEE IT STILL ON THE PAPER WHEN PEELED OFF, then it was not glued down. Because you will NOT be able to peel up the image if glued on the wood. Impossible.
@mister_manager Ай бұрын
Is it possible to use ModPodge instead of the spray starch, or are there any alternatives?
@imagetransferswithrix Ай бұрын
The starch is to allow you to print using an Inkjet printer. ModPodge won't work. You can use it to glue with, as I often do, but not to use for inkjet printing.
@llwellwynaitkens9012 Ай бұрын
Why dose the photo when done comes out pale
@imagetransferswithrix Ай бұрын
Yours? Mine does not. It comes out colorful. If you want shiny, you need to coat it with something.
@2busytv166 Ай бұрын
What colour printer do you use? I bought a laser one and the photos are coming with white spots and weird colours
@imagetransferswithrix Ай бұрын
I have a HP Color Laserjet Pro M254dw. Sounds like your laser printer has issues.
@thenotoriousd.i.d Ай бұрын
It's only wet every other day😂😂gotta love the weather
@jchanta415 Ай бұрын
I'm about 4 min In and haven't learned a thing lol keep these instructionals down to under 5 min guys
@imagetransferswithrix Ай бұрын
Things worth doing takes a little longer than 5 minutes. If you want to do it right, don't be in a hurry and practice patience.
@jchanta415 Ай бұрын
@imagetransferswithrix a little longer than 5 minutes doesn't mean an hour of useless info. Get with the times man. Look at everyone elseses videos. Short and to the point=More views.
@imagetransferswithrix Ай бұрын
@@jchanta415 How can you possibly know if there is an hour of useless info when you can't keep it up beyond 5 minutes??
@dancingwheels8494 Ай бұрын
Thanks for your video! Where can I get the roller, and what is the name of that plastic shield that you used to protect the roller and the wood? Lastly, can this method work on a canvas?
@imagetransferswithrix Ай бұрын
You can order everything online these days. Brayers are common. The 'plastic shield' is just a piece of plastic I found laying around. And yes, I have videos on this channel demonstrating it on canvas.
@johnobrien8777 Ай бұрын
Hi I am not having a lot of success in peeling off the paper. I usually have to go through the rubbing process. The result is not too bad but it is very time consuming. I have a heat press. Is it possible to use the heat press on the wood with Liquitex and your transfer paper and if so how many minutes and at what temperature.
@imagetransferswithrix Ай бұрын
The paper comes with instructions on how to successfully use the paper. I must assume you didn't read it, because the first two sentences states "If you have any issues, please email me at [email protected]. Please do not ask your questions or post any issues you may have on the demonstration videos on KZbin."
@justiceblackwolf369 Ай бұрын
do u do regular pictures? Polaroid,etc
@imagetransferswithrix Ай бұрын
I don't understand your question.
@richsnapolitano Ай бұрын
Less talking more transfers
@imagetransferswithrix Ай бұрын
Manners makes the man
@amandareed5885 2 ай бұрын
I need some of that paper
@imagetransferswithrix Ай бұрын
It's good stuff!
@kanases 2 ай бұрын
Can u glue a picture printed on photo paper on to a canvas? Thanks!
@imagetransferswithrix 2 ай бұрын
Sure. But it would be ugly. It will look like you just glued a picture printed on photo paper onto canvas rather than having the IMAGE ONLY 'printed' onto the canvas which looks 3249.6% better. Just saying.
@kanases 2 ай бұрын
@@imagetransferswithrix Yeah I did some research and found out that is the best method, thanks!
@alexouellet5915 2 ай бұрын
Is this considerably more durable then the video where you used clear coat???
@imagetransferswithrix 2 ай бұрын
Considerably indeed! The only way I'll be doing shirts with my paper from here on out. :-)
@marypartridge5154 2 ай бұрын
You Americans are great but you guys talk a real lot.
@imagetransferswithrix 2 ай бұрын
LOL! Thanks? I would say 'great' is a bit of a stretch. We are certainly a 'unique' bunch to say the least. As for talking too much. Well, that's on me. ;-)
@RetroReminiscing 2 ай бұрын
Superb job! Thank you for shareing your work and how to do with us 👍🌳😁
@imagetransferswithrix 2 ай бұрын
Thanks so much!
@rachelarchibald-wl5vk 2 ай бұрын
Amazing this is great!! Your so down to earth love it!
@imagetransferswithrix 2 ай бұрын
Thank you so much!!
@gregoriybelskiy1 2 ай бұрын
Thanks Rix very nice job!
@imagetransferswithrix 2 ай бұрын
Thanks for commenting!
@edaflyboy4476 2 ай бұрын
Your exceptional educational videos showcasing the intricate process of transferring photos/graphics onto wood have left me utterly captivated. I am genuinely interested in purchasing your unique transfer paper . Kindly have a moment to peruse your mail at your convenience. Thank you sincerely and may success accompany you on this creative journey.
@imagetransferswithrix 2 ай бұрын
Wow, thanks!
@ednasanchez7559 3 ай бұрын
Question: if my photo has a date or words when I transfer this is going to transfer backwards?
@imagetransferswithrix 3 ай бұрын
Before you print your photo, you need to MIRROR it using your photo app.
@dmariewalker6880 3 ай бұрын
Hobby Lobby has those wooden slabs, as does Walmart, in various sizes. Thanks for the demonstration, I appreciate it and it turned out awesome.
@imagetransferswithrix 3 ай бұрын
You can also get them on eBay.
@agiagata945 3 ай бұрын
Marvellous ideas, thank you for sharing. Unfortunately I haven't got laser printer, also this paper is not available in UK. Thank you anyway, is so good to watch your artwork 😊
@imagetransferswithrix 3 ай бұрын
Thanks for watching and commenting. You may want to watch some of my other videos that demonstrate how you can use your inkjet printer. As for being in the UK, no it isn't available there, but can be shipped there.
@madelinecoreen3859 3 ай бұрын
👀 Promo`SM
@imagetransferswithrix 3 ай бұрын
Hear that sound? Me thinks those trolls are out about again. 😆
@E.n.J 3 ай бұрын
You look a lot like my late daddy! I'm an instant fan!
@imagetransferswithrix 3 ай бұрын
That's awesome. :-)
@yuliyabryant4052 3 ай бұрын
I liked your video but one more thing got my interested. It is the tree on your loan. What kind of tree is this. It is so beautiful.
@imagetransferswithrix 3 ай бұрын
Japanese Maple
@oiputthatback7361 3 ай бұрын
Lovely job, thank you.
@imagetransferswithrix 3 ай бұрын
Thank you! Cheers!
@LanceMcGrew 3 ай бұрын
The KZbin algorithms have introduced me to these transfers. Swear they are in cahoots with Amazon. Question is - why all the fuss about hacking sublimation on heat transfer vinyl since this sure looks a lot simpler and less expensive? Does one method hold up better over time or some other reason? And now I need to learn about pigment inks for my Epson. Didn't realize there was a choice over the default inkjet ink. Sure appreciate the detail and best advice you put into your videos.
@imagetransferswithrix 3 ай бұрын
Thanks Lance. When I learned that you can replace your dye ink with pigment (at least with my Epson printers), I was all over it. I just think Pigment is better, but that's just me. As a disclaimer, I have zero experience in sublimation and don't want to invest in it unless there is something I want to do that requires it. Haven't found myself there.
@tazdevilshedevil3 3 ай бұрын
Wish I could get mine to look like that I've got a inkjet printer none of mine looks like that having hard time finding out what kind of paper works the best to do the transfer
@imagetransferswithrix 3 ай бұрын
I have a video that shows you how to HACK my transfer paper to use Inkjet. kzbin.info/www/bejne/qIO6eY2JhrN9d7M
@joanderwitsch2759 3 ай бұрын
It should say products that are needed. And each step numbered would be so awesome for us beginners. Thanks again
@imagetransferswithrix 3 ай бұрын
Check out my latest video on doing these wood slices. I've changed things up a bit. I'm always experimenting, so things change. kzbin.info/www/bejne/rZnMdYKXjLVghqc 1. Wood Slices 2. Glue (Mod Podge works great) 3. Can of white primer. 4. RixCanDoIt Quick Transfer Paper 5. Krylon Crystal Clear spray (or equivalent) 6. Brayer (the rubber roller) You may also want to get a few sponge brushes.
@joanderwitsch2759 3 ай бұрын
I just watched your video of transferring pictures to wood slices. This is something I would like to pursue. I would like a list step-by-step of the products that I made. And they stepped by step way to it. Numbered would be great, thank you.
@imagetransferswithrix 2 ай бұрын
You're not asking for much, are you? LOL! Did you mean 'products that I (need)'? At this time I do not have a numbered list of products and steps. That's because it would be TOO RIGID. We're creatives. You learn from watching the videos, take notes of what you might need, and if you have a specific question, just ask. :-)
@swishair 3 ай бұрын
another awesome video, just keeps getting better. Thanks for the tips with the clear coat
@imagetransferswithrix 3 ай бұрын
Thanks! :-)
@imagetransferswithrix 3 ай бұрын
Watch the more updated video after this at: kzbin.info/www/bejne/iZmTeHyMndt2lc0
@45artpm27 3 ай бұрын
🖤🛡️⚔️
@imagetransferswithrix 3 ай бұрын
What does this mean?