My buddy just gave me his haven't used it yet can't wait

Did it come with the motor mount?

Anybody run these on a Newport vessel?

Just ordered one. Thx for showing your setup. Looks super fun!

I`m running a Minkota Endura Max 45 on a 14 foot extra wide flat bottom. Not sure how an APC 10 x 5 would work on this setup. Thoughts?

With out a doubt I liked and subscribed and bought 2 sets of 10X4 props and if I watched all of the way to the end ! I would have bought the 10 X 5 just for what you said the sheer pin being incased in the hub on both sides!🤨crap! I’ll just have to buy 2 or 6 more of the 10X5 s … thanks I look forward to to going faster with less amp draw!!! Awesome man ! Good job!

Just shared your vids with viewers of some others that had big channels and have all vanished in the past year

This may be a dumb question. Can this kayak be used as a paddle kayak? Is there a cover where the drive would go?

Reason manufacturers design and make their products the way they do, these have no durability and if the smallest piece of grass gets on them they don’t run correctly

I love that spillway! I got a boat and a yak if you wanna fish hmu

Well cant buy this anywhere in europe

Drilling the prop this way will make the prop unbalanced. By with a regular drill will make the hole no longer precisely center as manufactured therefore it will cause vibration. It will work but I'm sure the vibration is there. You might not feel it but it's there. The correct way to drill the pro and keep the hole centered is to have it lathe mill or professionally drilled by a machine shop.

Hi Cody, That was impressive. Please if I am wrong help me understand. From your experiment it seems the better deal is the c2 30Lb. For the gain in Mph the 55lb cost twice as much as the C2 for very little gain. It looks like the 10/4 was the winner for the C2 but both worked better than stock. I just ordered the C2 and 10/5 for my nucanoe unlimited. Thank you so much for doing the research it was very helpful in making my decision.

works great but does not like grass

Just purchased one of these, after much research. I simple chose it because I didnt want to invest too much in my first fishing kayak, as well as being an older female. I knew that i would encounter some issues with the rudder being on the bottom, but i figured that i would be able to find a video somewhere to combat the issue I am encountering. How does one solo load this onto their car without messing up the rudder. I am a visual person and cannot find a video anywhere. I have even tried to find a decent native video for this issue.

I'm thinking of getting 2 of these Kayak, one for me and one for out son and 2 of my buddies want one as well...... For the price, I don't think no one out there can beat it for a foot peddle drive kayak!!! I was thinking of getting the Old Town PDL106 but that's $2600 Hoodoo Voyager Kayak $1200 x 2 = $2400 is less than one Old Town kayak at $2600 If I decide to just buy 1 kayak for $1200 Hoodoo Motor $400 Garmin Fish finder, hood & bracket is $200 That's $1800 still less than one Old Town kayak Thanks for sharing

Hey Cody! Just started watching your stuff. I'm thinking of getting a Hoodoo Voyager like yours and was wondering how yours is holding up. From the looks of it, looks like it's doing fine. Thanks for the videos.

Love that it’s made in TX, USA❤

i had the old sea hawk II, then an ex destroyed it. got a marniner 3. very similar but thinner and lower max weight. just went on a 2 day trip. pure bliss. im saving up for a hangkai 4stroke 4hp. boats n hoes.🍻

You should make a clamp with a wheel or wheels instead of adding a bunch of pvc for the cart. Love the yak. I’m about to pull the trigger on one.

aha! you did it. Might be too much for a yak, but sounds perfect for a canoe! Seems like the math would hold up for any 86lb troller. I would be curious to see the running time difference between the 55lb @ 12v w/10x5 vs the 86 @ 24v w/10x8 *with the caveat that you don't go over 3mph with the same load.*. I suspect the 86lb setup will run longer with the same batteries since the amp draw will be lower for the given speed, so less lost to heat and battery dynamics.

Great video! To me, this begs the question: What happens with the 10x8 on a 24v or 36v system? Really feel like we're on the cusp of some silent and powerful electric motors in the next few years.

whats up from florida!

Hey Boss, what is the shaft length on your trolling motor?

Was your battery on water life affected? I mean more or less hours on the water

Great video. I'm looking for a pedal kayak and fish frequently from my paddle Perception Pescador Pro. I love how my 2 Perceptions track. Im 5ft2 and need something I can car top and reach the pedals lol. This kayak looks to fit the bill. How does it track and cut through the water? Is it nimble for rivers and smaller lakes? I go on Lake Erie frequently (when she cooperates). I've had a kayak that was sluggish and didn't track well and do not want to repeat. Thanks so much!

Just got mine Saturday, had it out twice did really well but the water was calm. How does does handle the wind and chop? It is easy pedaling against the current?

What happened to the intex

So how many times did you say " hope you like/enjoy this video " ?

Awesome thank you

I just looked at my APC RC airplane props to see if I could use them but it looks like yours are pusher pitch props & my plane props are tractor. I wonder if I hooked the battery up in reverse would it work as the motor would spin in reverse theoretically or would I fry something?

Hey Cody, I have an orange voyager as well. I made a t bar mount and mounted a 36lb trolling motor. (Video on my channel) Now im trying to get more top speed by changing the prop. Obviously, we need a 2 blade prop to fit in the center drive slot, but which 2 blade prop did you like best out of all the ones you tested? Thanks!

So what's the prop you ultimately think best for 55lb-86lb thrust motors? *My sisuation's a bit different. I'll be using one 55lb and one 86lb trolling motor (vevor and newport) on my 27 foot sailboat. The sailboat runs great off a 4hp gas motor, so i suspect it'll do just fine with this combo. But want to make sure to get the right props for the job. So which size prop ended up working out best for you?

kzbin.info/www/bejne/mqDWhn99qZhlgdksi=_gE-Um87bh6m7aZZ. Modified mine to make a drift boat.

How long do you think a 30lb thrust motor with a 35ah battery would last out in the water?

Do one with the 10x6...I wonder how it would work

how does it handle chop?

Thanks!

I'm looking into purchasing this kayak but have a few questions if you wouldn't mind answering. Many of the areas I fish have lots of debris in the water. Does the rudder stick out under the kayak or is it fairly flush with the bottom? Also are you able to stand on this kayak or is it too unstable? Thank you in advance I love your videos.

Hi Codyakfishing, I wanted to give you, my updates. I followed your suggestion and went to Home Depot with my prop. Found the correct bolt to simulate the prop shaft and started digging through the washers. Found a M10 that fit perfectly. It took 4 of them to stack to the threads. I just went out yesterday and wow! The prop is faster, but I what I found most impressive was the quiet and smooth ride. Totally different from both the stock prop and the 3 blade Kipewa. I trolled nonstop for 7 hours and usually the battery would be at 70 something percent when I put it on charge. It was at 88 percent, what an incredible savings. I use my motor on the rental boats at my home lake. The boat is a 15-foot, flat bottom, fiberglass Carlonia Skift that weighs over 500 pounds. Thanks again for all your very timely support! You mentioned on a video you live in Colorado. I am from Colorado, a small town in Delta County on the Western Slope. Let for the Navy in 1984 and never made it back home. I do go back for hunting trips when I can. Take care and GOD bless!

Thanks!

You will kill the motor, better check the heat from the motor

How comfortable is it for a long float? Also how stable is it?

hey when you pre-ordered this how long did it take before they shipped it?

Does this fit Newport 55lbs?

Thanks for the info. How deep do you need to operate the drive safely?

Is there a recess under the hull for mounting a transducer?

Thanks for all your videos on this kayak, as there are not many to be found. I know it’s fairly new so that’s probably why. I’ve had the element 95 since late 2020 and so ready for an upgrade to a pedal kayak. Not wanting to go much bigger so this one is really looking perfect. Thanks again!

I ordered one the other day. Looking forward to it!

Thanks for the video. I'm waiting to see more reviews like this before i pull the trigger on this kayak. I'm super appreciative you made it. Also, one thing that i keep seeing about Hoodoo is how great their customer service is, and i bet if you send them a message, they would send that side handle that cracked for free.