I would change the t20 tamos to normal t20

ever heard of Torque Spec ?

I don't know why he didn't show that but listen people down at the bottom below the generator at the bottom of the fan shroud there's just enough space to get the belt out you have to twist the belt around the blades and then twist it back on❤

Watermelon 🍉 I support them. Stop the genocide

That watermelon ain’t going nowhere

Great Explanation, THANKS

500 for that much atopping power, what a deal!!!! (Seems i did too many ricers too)

Chevys are the best and if you do work on them are by far the easiest! Worked on cars/ trucks 50 yrs and always found this to be true.

big feller like you under the dash ------------- but better than the import stuff

1999-2007 gm trucks are easiest trucks to work on if I could choose what vehicles to work on for rest of my life and I wanted ease that’d be my choice can do it blind folded

07 you can bleed with a snap on scanner through the abs block

For those asking, I got this part from ABC auto. It's a Dorman part number 931-318 for some reason on this truck i had to look it up under a 03 silverado. If i remember correctly i took the original part out and cross referenced the number . Hope this helps.

Hi wondering where i can get that whole assembly rods and everything thanks

You the man

Thanks for the info. Very helpful. My dumb ass punched the harness while upgrading my mirrors. Should have checked but I failed to connect the dots. In any case, it's good now thanks for the share.

Is that part number compatible with 2008 silverado thank you very much I wouldn't figured this out.

Dude. You're a lifesaver

Super awesome video thank you so much for sharing. I need to replace my alternator on my 2004 Lexus RX330 same motor same alternator I believe

Rattle traps

Thank you for the food on the table for today you make me $120 God blessed

And...you talk TOO MUCH.

NEVER clean a MAF sensor with ANYTHING except MAF sensor cleaner.

Excellent!!

Thank you my cam and gear and motor keep starting and stopping when it in regeneration or clean mode and now i have a error code ( 01) .it wood be nice if they send me a whole valve body or just replace the complete unit.

Thank you right on same problem burn fuse saved me alot of time thank you

No need to take backseat out. You can pry out the old ones from the outside bottom with a screwdriver. Then pop in new.

I have a ford jubilee and can't get the belt off from the bottom pulley as there isn't enough clearance. That's the trick I was hoping to see on your video but didn't. Any ideas?

Filmed on a potato in 2007.

Thanks for sharing this. Huge help and cruise is working again.

Same problem I have I changed to fuse and it just popped ima have to open up the door are check

Tnx bro, nice job😮😮 I learn something new

BEWARE!!!!! READ THIS BEFORE YOU REPLACE THE SWITCH!!! Before you replace the switch you need to realize the Brake Lights won't work unless the truck is running. I spent an hour checking fuses, replacing the old switch, putting the new one back in and out three times. Nothing worked when I pressed the brake pedal. Then I decided to crank it up and the brake lights worked. I thought the brake lights would come on anytime you pressed the pedal. It did in every other car I owned but not this truck. So if you think you didn't do it right crank it up and try it then.

I replaced the switch now my brake lights still on anybody have any info

Perché non riesco a trovare i paraolio dove li posso acquistare o il trattore smontato e non lo posso rimontare

Did you say " chic engine" light. Or didbyou say, "chicken gin" light.

Thank you 👍

Late to the channel, but were you experiencing any surging/pulsing of rpm's when you were able to get any cruise control engaged prior to replacing it?

Awesome vid thanks

Thanks for the Video, putting marker lights on our boat trailer.

Useless,Sée nothing no explanation

Great job D. !!!🙌

We're does the 3rd rod go

God bless you, thank you.

Blessings, John 3:16. Jesus loves you.

this didnt fix it for me.. lmao been at this all day

what an idiot.

Thanks much. I'm still nursing an 06 Silverado. Going strong except for rust.

Thank You!

this video is titled wrong.. it should say "why to use, and HOW TO INSTALL AN OVERRUN CLUTCH".... because the content of the video has nothing to do with repairing the overrun clutch, but only shows how it attaches to the pto shaft of the tractor.... and because you are showing how to do this, I can tell you that if the roll pin that holds it on the pto shaft needs replacing, it indicates spline wear, OR, lack of grease on the implement drive shaft.... and its likely to break again sometime soon..

The Owner makes a case why he should not own the property.