Frame will be coming in the mail in few days, looking forward to build this one. I see you have GPS at the front, did you have any trouble with it at the back? Where did you get the file for the holder?
@DRONEPOISONСағат бұрын
I did have issue's getting lock on the rear, and made a custom file myself for the front. You might be fine though with og holder in the back, the gps I used was messed up. Think I got a bad one.
@SpaghettiFPV-tg3qh7 күн бұрын
Fk yea Awesome as always I liked that work U did In the shed :) Shame about the ladder you musta hit a snake.... Get it.... Snakes n ladders lol
@JustinDrones13 күн бұрын
hahah make the kids do all the work!! great idea. Congrats KC.
@StrickleeFpv27 күн бұрын
Awesome video
@AdventureswithQuillen28 күн бұрын
So basically, you run the hot wire to the 10v power pad on the vtx side? Should be the same for the 03 right?
@DRONEPOISON28 күн бұрын
Well all fc's can be different. I have no idea what fc your using, but if your fc supports a pit function to would find that voltage pad and some you will have a jumper to select between 5 and 10 volts so I jump for 10volts with will work for 03 or Vista. If you need more help maybe we can sync up on discord or fb messenger
@AdventureswithQuillen28 күн бұрын
@@DRONEPOISON I'm running the same FC. Skystars H7 Dual BMI270
@AdventureswithQuillen28 күн бұрын
@DRONEPOISON I took gps off my freestyle quads but when I finish my VD5, I'll be setting it up this way for sure. Glad I found your video because I tried creating an account on discord to figure it out but it won't let me post on there for some reason.
@DRONEPOISON28 күн бұрын
Cool yeah if you follow my setup you should be good let me know if you need more help. Just make sure to set it up in the modes tab on user 1
@AdventureswithQuillen28 күн бұрын
@@DRONEPOISON yessir, thank you
@AdventureswithQuillen28 күн бұрын
Thank you soooo much. Couldn't figure out why I couldn't get it to work for my 03. Going to try this and see if it works.
@MarcoMoreno8330Ай бұрын
Is this 6 or 5 inch?
@DRONEPOISONАй бұрын
This was a 6 inch, but they do have a 5 inch aswell
@MarcoMoreno8330Ай бұрын
@@DRONEPOISONcool, so you have the parts list of this drone?
@DRONEPOISONАй бұрын
@@MarcoMoreno8330 the first few minutes of the video I go through all the parts, is there something more specific your looking for like the links where I bought the parts? I bought direct from flyfishrc all flyfish products and the rest from pyrodrone
@ritsakara3476Ай бұрын
COVID 19 his favourite
@DRONEPOISONАй бұрын
Wierd to say, but ok
@salimabdulschakuur1936Ай бұрын
2.5, 2.5, 3mm would probably do the trick and be a solid middle ground in durability and weigt. This frame really is a beauty :) Btw, may i ask you for your lipo tpu protection stl? It looks really interesting and id love to try it. Thanks
@pointofviewgrАй бұрын
Nice sharing 👍
@truefpvblood158Ай бұрын
🔥🔥🔥💪💪🔥💪🔥💪🙌🙌🙌
@burdfamfpvАй бұрын
Let's goo ! Wasn't super clean but it was CLEAN! Nice work man 🫡 💯
@DRONEPOISONАй бұрын
It's all in the name of fun, first one was clean, but yeah second one the right rear prop tip sawed the grass, but the trick itself was pretty clean. I flew till I was out of props, and ripped some esc pads off, was stuck in the trees three times haha.
@JustinDronesАй бұрын
2:32 I just call that a lumpy haha. Awesome bro, not the crash in the tree part.
@DRONEPOISONАй бұрын
Do the Lumpy Lump
@hi_desert_ratАй бұрын
Let's go Mike! You got this!
@DRONEPOISONАй бұрын
Yeah Mike's a Killa
@bigoilyguyАй бұрын
sick wth it!! good luck big mike!!!
@flannyfpvАй бұрын
Awesome! 🔥🔥🔥Mike got this. 💪😎👍
@MikeDronesEntАй бұрын
👀
@SbangFPVАй бұрын
Wow what an amazing method. Can you please share where I can find these bearings? And are these compatible with 2207s only? Or 2306s or 2806s as well? And how do we determine the specs of bearings? Thank you so much for shading content mate 👍
@DRONEPOISONАй бұрын
I buy them by the 100 from Miya at [email protected] direct from Japan they will fit any motor these days that take a 9x4x4 bearing which is like just about all them for drones. Each motor will have a design blueprint on the site that makes them with bearing size these are the NMB L-940zz which imo are still the best 👌
@SbangFPVАй бұрын
@@DRONEPOISON Got it. And MTR stands for “Metric”?
@DRONEPOISONАй бұрын
@@SbangFPV no idea on MTR or where you got that. The bearings are 9mm x 4mm x 4mm
@SbangFPVАй бұрын
@@DRONEPOISON I saw it written on the bearing casing tube you have “L-940ZZMTR”. I did a lil research and I think MTR means metric system. The other one is inches.
@DRONEPOISONАй бұрын
@@SbangFPV the company I referred is the manufacturer that make nmb bearings. It's the lowest cost you can get. But yeah I just order 100 and they last me like a year
@WKfpvАй бұрын
You sir exceeded my expectations
@DRONEPOISONАй бұрын
Thanks for the kind words, got yourself a new sub.
@MikeDronesEnt2 ай бұрын
i thought you went through a time machine! congrats QuadTronX!
@KrishnaKumar-rawal80772 ай бұрын
Hi
@DRONEPOISON2 ай бұрын
Hello
@LumpyFPV2 ай бұрын
The line starting at 1:10 was mad
@DRONEPOISON2 ай бұрын
This was a very conservative rip, just to show off the place. But there are like over 100 ladder dives and gaps for dayzzzzzz
@LumpyFPV2 ай бұрын
Oh hell yeah dude!! Sick rips for a sick ass spot. 🤘🏼
@DRONEPOISON2 ай бұрын
It's hard to get focused on one line as everywhere you look there's gaps and as your flying to want to starting shiz. Lol. Road trip?
@jonathangenel91702 ай бұрын
Great video brother, droppin bangers lately. I'd be interested to see a tune video and your thought process throughout. Show us rookies how it's done.
@bigoilyguy2 ай бұрын
this was friggin hilarious bro great job DP minions lol!! congrats KC bro enjoy that frame!!
@DRONEPOISONАй бұрын
Kids had a blast, was fun seeing there minds work
@SkeezyFPV2 ай бұрын
Great vid! I’d like to see a tutorial on the pit mode. That’s a really good idea to save the o3 from burning up!!!
@DRONEPOISONАй бұрын
Will do brother
@burdfamfpv2 ай бұрын
Congrats to the winner and great way to give back Drone poison 🫡 much appreciated my friend
@DRONEPOISONАй бұрын
Thanks, appreciate you checking it out.
@bigoilyguy2 ай бұрын
I want the side by side tuned vs stock and also i vote build the blue one
@bigoilyguy2 ай бұрын
Sick video bro!!
@DRONEPOISONАй бұрын
blue it is and a side by side tune will do.
@kneeldownu2 ай бұрын
Superman frame for the T-Motor build. Shorty build video with any problems that arise. And of course a bloober reel. Thanks for the channel.
@DRONEPOISONАй бұрын
No problem, sounds good
@Smagsfpv2 ай бұрын
Yeah i would like to see how the stack holds up. Would like to see how it flies with the stock tune and then yours 🤘
@DRONEPOISONАй бұрын
You got it!
@ImperialArmour2 ай бұрын
I wanted to see how you'd fly these trainer motors like a pro
@DRONEPOISONАй бұрын
coming to a screen near you shortly
@lambo_drives2 ай бұрын
rip it ✌🏻
@lambo_drives2 ай бұрын
blue/red one - matches last year blue/red giveaway (pre-reprint)
@DRONEPOISONАй бұрын
will do
@scottallen64782 ай бұрын
Interested to see how your tune compares dude
@DRONEPOISONАй бұрын
coming soon
@AponeFPV2 ай бұрын
This was hilarious bro you have great kids 🔥
@DRONEPOISON2 ай бұрын
They had a blast doing there little skit was fun watching them crack up, Thanks for watching and your support brother. Funny thing is 5 of them where not in the video hahaha, 8 kids is nuts.
@hi_desert_rat2 ай бұрын
Interested to see how that esc will hold up.
@DRONEPOISON2 ай бұрын
You and me both, if it holds up then it will be a steal as the stack is only like 89 bucks, any idea what you want to see in the build, Like long form or just time lapse, which frame you think I should go with first?
@hi_desert_rat2 ай бұрын
@@DRONEPOISONTime lapse on more difficult of the two with real-time in cuts of any issues that arise (fitment, problems, etc.) Then set up esc, throw on blackbox & ptb to tune filters & pids (would really like to see the noise profile). Maiden, then RIP THE HOLY SHIT OUT OF IT! 😁
@KCQuadTronX2 ай бұрын
awesome Stack!!!!! cant wait to see ya shred on those motors also!!!! and I would love to see the blue one get built first ...I love detailed build videos and reeviews just like you do ......See ya in the sky brother!!!
@DRONEPOISON2 ай бұрын
Thanks for the feedback brother, as always thanks for watching.
@KCQuadTronX2 ай бұрын
OMG!!!!! I cant beleive it !!!! thank you all so much i cant believe I actually won!!!!! Stay amazing kids and thank you so so much drone poison your truly an amazing pilot and person and I am blessed to be able to call you my good friend .....see ya in sky brother!!!!
@DRONEPOISON2 ай бұрын
Congrats, brother thanks for watching and supporting the channel, best wishes and enjoy bashing the frame
@taytayfpv2 ай бұрын
Congrats man your going to like the frame
@JustinDrones13 күн бұрын
congrats!!
@hi_desert_rat2 ай бұрын
Kongrats KC! Kool kontent, kids! 🎉
@DRONEPOISON2 ай бұрын
Thanks for the support and watching.
@eprohoda2 ай бұрын
Drone!what a beautiful . godspeed-
@DRONEPOISON2 ай бұрын
Thank you and appreciate you
@FlyZoneFpv2 ай бұрын
Let’s go . 👊🏻👊🏻🫶Congrats KCQuad
@DRONEPOISON2 ай бұрын
Thanks for all the support and watching 👀 🙏
@StrickleeFpv2 ай бұрын
I’d love that frame 😎
@jonathangenel91702 ай бұрын
Loving the content lately, keep it up bro!!
@DRONEPOISON2 ай бұрын
Appreciate that my man, I'll keep it coming got some stuff coming soon
@DRONEPOISON2 ай бұрын
So guys it's official as of today, Exen Design let me know they will be moving over too a version 2 that will identical to the frame I am running, you spoke and they have listened. Sorry to those that wanted a light version, you might grab one now. The frame will be cross compatible with the previous version. Thanks for your feedback fellas. Frames will be ready in a month or so. P.S. you all rock and good luck in the giveaway.
@jeffreyiannacco82862 ай бұрын
Definitely 2.5/2.5/3mm Plates... Don't count grams. Durable is my choice.... Be so Awsome to win the FlyFish 55 Frame. Great Review 👍 Thank you
@DRONEPOISON2 ай бұрын
Great news as of today its official, Exen Design will release the rev 2 which will be identical to my setup in a month or so. It will be cross compatible with old version. So they listened to your voices. And I got you entered brother.
@JustinDrones2 ай бұрын
Great review and good lookin frame. I like your updates to it. Deff a bando basher. I would like to have one of each to test myself. I was thinking 2.5mm might be enough, maybe not. The new studio setup looks dope too dp!!
@DRONEPOISON2 ай бұрын
Thanks Jd, definitely a cool frame, and thanks for the compliment, think your the first to notice lol.
@scottallen64782 ай бұрын
I’m running a bunch of voladors atm, def interested in trying the DP heavy hitter version, extra thickness in carbon for the win 🔥🤘
@DRONEPOISON2 ай бұрын
Volador is a solid choice to run and pretty tough. I am keeping 1 around still. But the Orca is my main go 2. Just been trying to get to three of the same setups and then s few others on the side for fun. Been really impressed with this variant of the Orca. I appreciate you watching and your feedback. Have a great evening.
@ChubbymacrodoseFPV2 ай бұрын
I would fly any frame you recommend, a Poison edition would be sick tho 🤙
@DRONEPOISON2 ай бұрын
Your the man Chubby, hope your doing great out your way and appreciate you checking out the video. A dp version would be dope, I don't really need the name but the thick plates will do just fine.
@flannyfpv2 ай бұрын
Awesome man! 🔥🔥🔥 You’re always pushing it! Your knowledge is always appreciated👍
@DRONEPOISON2 ай бұрын
Thanks Flanny for the kind words my man, hope your doing great out that way.
@MikeDronesEnt2 ай бұрын
this was a good explanation of what we talked about the other day about this frame. I'm kind of interested in trying both variants since i do like the lighter frames but durability makes all the difference in my frame choices.
@DRONEPOISON2 ай бұрын
For sure, hope you pick one of each up. They fly great for sure brother. Tha KS for watching the video my man keep sending it like a boss. Really enjoyed that last video
@xBarnabyJonesx2 ай бұрын
The upgrades you made are exactly what this frame needed! I had the bottom and mid plates break at the cutouts too. Love the way this frame flies, though. This looks like the perfect version of it. It would be awesome if Exen would make this available.
@DRONEPOISON2 ай бұрын
Just for clarification these where my suggestions to Dallas on how to improve the frame and he made the changes, but has been up in the air on the thicker plates. I would love to see an option for both and let the people choose. Either way even the new stock plates should be much better than prior versions. I do appreciate you watching and your awesome feedback. Frame does fly amazing 👏