Become a Drone Master: Fpv Drone Build (2024)

In this how to build a freestyle drone video, with the Orca 5 frame by Exen design, I will show you how to make drone and customize your fpv drone build with the best components, including the DJI O3 air unit and FlyfishRC motors. Get ready for an exhilarating flying experience in 2024! #Exen Design #dji #Orca 5
In no way am I promoting the purchase of this frame at this point in time, please wait for full review!
Patreon Link - www.patreon.co...
Affiliate Links
FlyFishrc 2207 Sword Motors - www.flyfish-rc...
FlyFishrc 2406 Flash Motors My Personal Favorites - www.flyfish-rc...
FlyFishRC Affiliate Link - www.flyfish-rc...
Team Maniacs: www.teammaniac...
Music: Song: Midnight
Artist: Owl Nest
Music by: CreatorMix.com
Video: • Video
Gear I use
Frame: FlyFishrc Volador 2 vx5, SupaFLY Syncmode, & Team Maniacs Oliy Rig
F/C: Skystars H7hd, Holybro F7
Esc: HobbyWing 65 amp, and Foxeer F4 Reaper 65amp (128)
Motors: FlyFishrc Flash 2406 1950kv, FlyFishrc Sword 2207 2050kv
Vtx: DJI Caddx Vista, 03 air unit
HD Cam: Gopro mini 11, session 5, and 03 Air unit
Packs: 6's Thunderpower Lunar Lander 1100 and 1340's Ovonic 6's 1000mah (Testing cnhl )
Radio: Radiomaster TX16S Max MkII Ag01, Tango 2 Pro
Control Link: Elrs
PROX-E Pilots
Justin Drones - / justindrones
Flanny Fpv - / @flannyfpv
Billy Hackett - / billybonghackett
Mike Drones - / mike1994r
John Solo - / @lowtone20hz
Phantom FPV - / @phantomfpv
Drone Poison - / thegdog0013
Austinspired - / @austinspired
KKTHX FPV - / kkthxfpv
Lumpy- / @lumpyfpv
Team Maniacs Pilots
BigOilyGuy - / @bigoilyguy
Razzman - / @razzmanfpv
Drone Poison - / thegdog0013
Tinker TweakFpv - / @tinkertweakfpv
MikeDrones - / @mikedronesent
Apone - / @aponefpv
BannisterPost - / @bannisterpost
FlannyFpv - / @flannyfpv1662
JayFpv - / @jayfpv24
KillarbeeFpv - / @killarbeefpv2143
MariaProps - / @mariaprops
QuadDaddy - / @quaddaddyfpv
MosfetSlayer - / @mosfetslayer
#fpv #drone #build #dji #2024 #fpvfreestyle #fptv #tricks #fpvdrone #freestyle #frame #flyfishrc #fpvdronebuild #howtomakedrone

[@scottallen6478]

Liking that tpu design that mounts rx ant under the 03 👍

[@DRONEPOISON]

Yeah, I used to destroy them all the time on the rear, and since I started putting them on rear 20x20 I have yet to kill one to date. Thanks for watching, Your awesome!!!!

[@AnnetteMcCabe]

I had early access to this vid btw

[@DRONEPOISON]

Your to funny 😁 😂 😀

[@TEKNEEKFPV]

Awesome DP cant wait to see the footy!!

[@DRONEPOISON]

Thanks for checking it out brother

[@TEKNEEKFPV]

@DRONEPOISON it was cool and very informative...I haven't seen you do many build vids so I was curious..I might do one for the new moongoat frame I got

[@hi_desert_rat]

@@TEKNEEKFPV I'd watch 👍

[@DRONEPOISON]

Yeah, they are a lot of editing, and trying to make sure everything goes right, had cameras overheating and stopping for no reason, two days of editing and three to upload as my internet was throttled. The struggles real. I have nothing but respect for cats that do build videos and would love to see how that new moongoat is for ya. I ripped the og goat for a long time, but had a problem of the front arms shoulder bolts getting bent them front props would rub back props as arms moved back, finally had to call it. Hope they fixed that. Always flew great though.

[@DINSTAAR-FPV]

I'm curious how this frame is holding up to your flying style, compared to the Volador frame. I've been having an issue with the volador camera cage also caving in and I'm looking for something more durable for my 03. Thanks in advance.

[@DRONEPOISON]

I'm getting ready to do a full review of the orca, I had initial issues with the frame but after speaking with Dallas he redesigned the plates and to date I have yet to even break an arm or plate, or kill a cam cage. The frame is my new frame I will be running 3 as I just ordered two more. It has taking some super hard hits. Volador is a solid frame the cam cage has always been an issue, Flyfish Robby said he was going to make a solid cage for us, but that was over 4 months ago and still no cage. Orca for the win. 1 note on the orca I am running a 3mm bottom plate and 2.5 mm top the stock is 2.5 bottom and 2mm top, I'm working to get them to make two versions but they want to hear what the people want. My orcas are tough as hell. If you oder maybe tell them you want the dame version as DP

[@DINSTAAR-FPV]

@@DRONEPOISON thank you for your fast response! Much appreciated. I agree the Volador is definitely a solid frame, the Volador 2 VD5 is my favorite frame to fly, but I'll be giving this Orca frame a try. I mostly fly parks and grass but will ask if they could or have plans to increase the thickness of the top and bottom plates. When I get my frames, I'll be following your build video to assemble them😉 Safe travels!

[@DRONEPOISON]

Appreciate you watching and your comments brother.

[@willcheyney]

Great video. What GoPro session mount are you using?

[@DRONEPOISON]

Thanks, just one I found on thingyverse and mixed to work. Not sure, would be happy to send it to you if you need it. I like my other mount better as it thicker and plan to mix it to work. It's a bit thicker. I appreciate you checking out the video.

[@hi_desert_rat]

Reminds me that I need a ratcheting jst pin crimper.

[@DRONEPOISON]

That would be dope, the snap in dji ones where different from the regular ones I have, so had to cut and solder, what's a guy to do 🤷‍♂️

[@hi_desert_rat]

@@DRONEPOISON precisely that.

[@DRONEPOISON]

@@hi_desert_rat now you got me looking at those crimpers on Amazon 😄 🤣 😂

[@HunnyFPV]

Waaay to many 3d printed parts. This is a heavy rig which won't fly as good as, say, stripped Quadmula with only one antenna mount installed

[@DRONEPOISON]

I've had a quadmulla, you can watch that video too on my channel, it flew great but was weak and didn't last a month, stack screws where weak and bent multiple times which fried electronics, and arms where soft and would bend upwards after a few hits, was a hard pass for me. I armor all my quads and tune them myself, and don't have any problems with the way they fly cause I don't run a hd cam. I run o3. I beg to differ as far as adding protection, been doing it on all my quads for awhile as the three most expensive things for me are motors, lipos and props. Great thing about this hobby is the amount of customization one can do to make a quad fit for there needs.

[@DRONEPOISON]

kzbin.info/www/bejne/e2KWhad7r8qigNksi=Jd353FjujRhCvVER this is the build video or the siren f5 and I will send you a link of me ripping it too. Just so you don't think I'm making things up.

[@DRONEPOISON]

kzbin.info/www/bejne/qaLLnmCuhsqfiMUsi=tWIwc1xQiOsK1FZV

[@NOT_ANOTHER_FPV]

I'd rather have a heavier quad that is protected then something that is a few grams lighter that has all parts exposed...maybe I'm just not pro enough to care about a few extra grams here and there....drone poison knows his stuff!