Not at all. I just plugged in the usb cable and setup the settings in cube suite. Have you used my settings in the end of the video?

@@MusikOchProduktion It was a bad cable, I´ve tried a different one and it works like a charm. thank you for your help and keep the good work.

Cubesuite. It´s the software that comes with the pedal

😂😂

The footswitch for my iPad is connected to M-wave Chocolate with a standard jack cable. The chocolate is paired with my iPad through bluetooth 👍

@@MusikOchProduktion nice

Acctually, that seems like a tough one. I haven't figured that one out yet. Only banks up and down 🤔

It does pass MIDI-signal also 👍

I have not been able set the FX-hardware buttons to a CC-command. Only specific slots like in my video (the commands are in the end of the video) Here´s a thread where I try to solve there FX1/FX2-problem: www.kemper-amps.com/forum/thread/62706-midi-cc-command-to-turn-on-off-fx1-fx2/?postID=672436#post672436

The products are in my description. Here's the MIDI-controller: www.amazon.se/-/en/Chocolate-Wireless-Controller-Rechargeable-Portable/dp/B0C4LNT18J

Yes its supposed to be a TRS cable. But since only one switch button is programmable on M-vave I used a standard guitar patch cable (and removed the second switch I wasn't gonna use anyway)

Yeah, I kind of agree. There sure are some limitations. For me mostly the lack of display 😏 But this rig is half the price of a Stage so I will try to work around the limitations 😅

The kemper stage is sucks! I had 3 and 2 of them came out defective, especially with the Tap Tempo switch! Delay and reverb freeze sometimes 🤦‍♂️😡! I’m not the only one! The best is the Head or Rack!

Oh man, that sucks @@diecaverna 🙁

@@diecaverna Nonsense.

No I did not 🤔 There seem to be a bit of false advertising regarding that function. There is some sort of ”group”-function but not in the mode we’re using. Google the manual or ”Cubesuite group E” or something to check it out 🤷‍♂️😅 forum.mod.audio/t/midi-chocolate-controller-with-the-mod-dwarf-an-introduction/7003

Ill do that. Thx - awesome idea. Glad I found your solution, its just awesome :)@@MusikOchProduktion

I am switching banks with a longer "press and hold" on A (Bank Up) and B (Bank down). If that would be more comfortable for you too instead of pressing two buttons the same time :)

Yeah, I also do it similar. But I think wants a button combination more: A, B, C, D, and the two combinations more E and F when pressing to buttons at the same time.@@marcelpacifico8533

Yes, you can set that switch button 2 for example turns on FX slot 4 etc. globally so to say.

Yes, I´m sending CC-commands. It is supposed to work with PC too I think, but I've had no luck getting it to work 🤔

Sure do! To send command to switch to a specific rig is a little weird: First you send a command CC47 with value bank number (CC47 2 for bank 2), then the Kemper idles and wait for second command which is the rig slot, CC50 1 for slot 1. CC51 1 for slot 2, CC52 1 for slot 3 etc. So if you want to load the rig in bank 3, slot 5 you send two commands: CC47 3 CC54 1

Thanks so far! The M-Wave just arrived and honestly I have no clue how to send commands, how to set them up, nor where to start. The M-Wave is connected with the player through the USB-c to USB-A cable and the Player is connected to the computer, on which I use the Rig Manager. Do you have any tips how to start? @@MusikOchProduktion

The basic commands are in the Player manual, I think some of them I found in the Kemper Profiler main manual that worked for the Player model too. Turn off the four FX slots are no problems 👍

Thanks! Good to hear. I was also wondering what cable you use to connect it to the player? I read that the chocolate isn't happy with any old TRS cable.@@MusikOchProduktion

@@recoverifyActually it’s plug and play between the Kemper and Chocolate with a standard USB-C to USB-A cable 👍 It even gets power/charge from the Kemper USB.

@@MusikOchProduktion Perfect! Thanks for the answers! 🙌🏻

Absolutely, that should be just as easy as with the Stage. Just plug in USB cable from Player to the computer and it should be the same process as with the Stage. You don't need any MIDI-cables. The Player will show up as an interface in your DAW. /Stefan

Yes, it appears, but I create the MIDI commands for the program changes and nothing happens :/

@ Actually I haven't been successful with program changes either. But it should work to send CC-commands instead like the ones in my video. To send command to switch to a specific rig is a little weird: First you send a command CC47 with value bank number (CC47 2 for bank 2), then the Kemper idles and wait for second command which is the rig slot, CC50 1 for slot 1. CC51 1 for slot 2, CC52 1 for slot 3 etc. So if you want the rig in bank 3, slot 5 you send two commands: CC47 3 CC54 1

Hummmmmmmm I don’t really know how to add these values, but I understood the logic behind it. I’ll try.

@ Try google your DAW and "send CC commands"

Tack! 🤩

🥳

Jajjemen! 🥳 (Eller I´m Good i den nya versionen)

Rätt! 🥳

Ja!

I think I have uploaded most of them on Soundmondo, search for user: Stefan_C ;-)

Is there anyone in particular you are interested in?

You can follow me/DM on Instagram @musikochproduktion

Thank you!

Sure! Have you checked in Montage settings that you use ”USB-midi”? I also have checked the box ”Midi i/o multi”, don’t know if that matters 🤷‍♂️😝

Could it be the forscore version? I'm using 13.0 ! the rest I'm using the midi in/out tab on the midi option and on the advanced tab I'm also using it in multi mode! but nothing happens!

I’m using Forscore 13.0.5 also. Acctually tried using my iPad Pro, works too. But since it has USB-C I had to use a different adaptor from USB-C to ”standard” USB female. Are you plugging it in the correct connection/hole in the back? (The square one not the one that fits a USB-stick)

@@DiegoBezerraMusicKeyboard I could send you photos of my settings if you want to. Just send an email to [email protected] and I’ll reply.

yes, all cables and connections are the same as in your video! I'm thinking that the channel 1 of the modx you insert in forscore may be different in the montage! I'm downloading the yamaha midi manual to check this!

Actually I mostly use this when I play live in venues (with in-ear monitoring). When I practice or program sounds I usually use headphones too 🙈😜

@@MusikOchProduktion what is the sound coming through in this video?

@@mikecampbell6938 Oh, I used a USB-cable directly to my iPhone when I recorded this. The keyboard has an integrated audio interface.

@@MusikOchProduktion it sounds good!

Glad I could help! 😀

I´m not sure. I think it might be "Boogie synth bass". I can check next time I use my Modx!

Haha, yeah I've got a couple of more stable ones too :-P

I made it myself. I can check the effects or maybe upload it to Soundmundo 👍

I have now uploaded it on Soundmondo. Search for Stefan_C

Oh, that's great!

I actually used a USB cable from MODX directly to my iPhone (keyboard as USB audio interface). Then I just recorded the video with the camera app as usual. Unfortunately the audio became mono. Don´t know why though...

@@MusikOchProduktion thanks I didn’t even know my modx has a usb cable in the back

@@MusikOchProduktion i just tried it and I hear no audio

Are you using the square port in the back aka ”printer port” with a camera connection kit? Check my video with Forescore sheet reader where I use the same cable. Also try to connect the cable after you have started recording with the camera app.

@@MusikOchProduktion no I was only using usb to iphone in the usb to host port

Thanx!

I’m thinking the daily use/something that always work. ”Quick & easy” get there kind of sounds. Guess like most often usable sounds. In Sweden we sometimes say ”Meat & Potatoes” 🤣

@@MusikOchProduktion ok, working sounds, for almost musilca generes, yeah, thanks

"Bread & butter" means the standard sounds you would normally play on a keyboard without any tweaking/sound designing: Piano, EP, organ, strings, brass.

Sure does 🙈😂

Luckily you can turn the nipple blinking off 😝

Yup. For every preset you can choose any led colour and if you want steady light or flashing in tempo of the preset (or off completely). I usally go with flashing only if I use arpeggios. It becomes like a silent metronome then.

@M Luiz This is a great synth, but damn it's ugly and that nipple is so tacky.

I can check, but I have layered a couple of different sounds depending on how hard I press etc. Also I would think I have pitched them a little bit different a couple of cents to make it sound more realistic.

@@MusikOchProduktion yes it's very nice sounding, if you can let me know which brass it is, would be great thanks.

Sure, I can check. If you use Soundmono I think I have uploaded this brass preset so you can download it. Search for Stefan_C, it’s my username there.

@@MusikOchProduktion Good stuff, many thanks

Haha, me too 😂