Johnson Cynthia Moore Sandra Perez Thomas

Robinson Linda Thompson Barbara Lee Anthony

Thomas Eric Brown Kimberly Thompson Carol

THIS VIDEO IS THE WORST. Do NOT try to do this yourself! It is not worth your time or the parts you need to purchase. Take it to your local scooter repair shop. For anyone in the LA area I recommend Rogue Scooters they saved my life after wasting so many pointless and costly hours on the poor advice in this video.

There is not much dexterity. good luck

Walker Susan Lee Sharon Allen Jason

so 10s to 13s? as 12.4 or 12.6v is 4.2v x 3. with a series connector

Got a flat on my front tire. Tried to remove it from the rim using this method but it seems to be glued to the rim. Doesn't matter how hard I press the sides together, the tire does not get loose from the inside of the rim which makes it impossible to get the tool between the tire and the rim.

Can you show how to adjust the rear brakes? Mine squeals in the rear disc

What app a is it

hello Güncellemeden sonra seri numaramı orijinal numarayla değiştiremiyorum, ne yapmalıyım?

Hydraulics mate?? Screw it on while it's mounted to a scooter and stand on it, use a big vise or any big clamps, use a ratchet strap. How is that a problem Thanks for the video tho mate. You took the risk for me😂 I was unsure of how they were built even tho I suspected them to be crappy but I didn't wanna spill fluid all over my floor 👌now I'm gonna upgrade the hell out of them cheers

Harris Thomas Martin Laura Anderson Barbara

My display stopt worling can anybody help

I just got a Max to replace my E45 I had for 2+ years (it electrically failed, mainly due to the whole 'hang a big battery off the downtube and secure it with two screws' thing being a fundamentally flawed idea, which is why none of Segway-Ninebot's later models did that). I'm glad to see how serviceable the Max is, since I intend to keep mine for much longer then I had my E45.

Hello I am going to change the rear tire of my scooter, the question is when I take apart the entire rear part, will the scooter still be waterproof, thanks for your video

Perez Dorothy Gonzalez Shirley White Melissa

I have change so many tires on my KQI3 PRO. I finally just got solids.

Gonzalez Jose Hernandez Frank White James

I'm not sure if you'll read this but i was wondering if I could get a link to where you got this brake cable? I'd really appreciate it. Every brake cable I've looked at or bought has been too short.

Thanks , you are my hero !! Works perfectly on G2 max

Changed my tired and now my scooter won't turn on. Anyone have any idea as to why?

Love it for RV

Do a tire change video on a Max that has ridden on a flat tire and has black self sealing goop everywhere please

what do i do if the update didn’t work

Is gel lubricant okay

13:19 Thank you very much for this informative video. I had to pause the vid to immediately cancel my pending order for the upgrade tire as you quickly made me realize that I am not prepared for this battle att. At the point in the vid the struggle with the levers is inserting too far. Not catching the angle tip and only that. Been there, it's tricky.

Will this help me delete the account bonded to it? I got it second hand and the first owner is bonded and I want him gone

My IScooter 10Max has the brake same kit. I went thru the same steps as you but cannot find that balance as far as making to turning resistance of the wheel go away. Found the brake balance.

Thanks mate.

5 side bolt. Use cheaper china tube wrench 6 side and make with pliers 5 side.

I have this scooter and I would strongly recommend to avoid it and find something that's easier to maintain. I got a flat on my KQI PRO 3 and it's a nightmare to change

Fuck monorim, no company is worth buying from that uses these kind of tactics. Hey we have a better product, then send you inferior parts and refuse to accept returns. Total scumbags

Super easy, haha. Took me 3 hours and the stem is quite wobbly. It seems the new suspension has no conical fit on the wheel side. What am I missing?

Great video, one point to add tho, save yourself a lot of time, and mix some dish soap and water in a cup, use your fingers to put it on the tire and the rim to lubricate it. This is a commonly used trick to get real tires on car rims, it works the same. Thanks for the video! Just finished up!

Ahora falta que pongas como quitar la tapa de arriba , por qué empiezas el vídeo ya desarmando eso y cuando terminas no explicas cómo ponerlo

Why on my segway ninebot it’s show you vechibel is on lock mode when I allay try to move it forward and on my screen it’s only show Bluetooth nothing else no pictures of signal of key , i really don’t know what to do, nobody can help

My scooter won’t connect to my pc

This may sound Iike a stupid question but the 2 boIts cIosest to the deck that are the same size, how do i tighten them?

Clamps are a thing for compressing. Just use two boards, one with a hole in the middle for the top and the other on the bottom between the forks and you can use as many clamps as it takes on the two sides of the boards. I think even ratchet straps might be able to do the trick, those springs are laughable. Hopefully you already figured it out by now. Plus, a press wouldn't work as well for this as you'd imagine. It's awkward when you can't handle the thing you're putting together.

muchas gracias por tus videos es muy dificil encontrar videos de este tipo y la sooter correcta...SALUDOS DESDE LOS BAÑOS, CALIFORNIA,USA.

Thank you! Something punctured my rear tire and it's too bad to plug it, so I need to buy a replacement tire but wanted to change it myself to save money. This scooter has been serving me well for over 1000km now and having it be out of action sucks cause I have to waste more money driving my car instead.

Definitely does not work

You are a genuis it works for the tuya brand scooter aswell Life saver now i can lock it 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂❤

Bro your Video are bad as hell

is their a way to remap to make faster?

congratulations, you've installed a worse fork not only it looks ugly but has twice the friction of the factory suspension

Thank! You! So! Much! Because of your excellent instructions I was done after 3 hours. Best regards, René

You gained a new subscriber hope to see some new videos for this year

Will it work for f40 ?