Pals Projects

Пікірлер

@lonnieclemens8028 Ай бұрын

I was wondering about putting the OSB around the window openings. The way you did it saves time. Drill a hole big enough for a saw blade and cut through it.

@Skyhawk945 3 ай бұрын

I just purchased the same Grapple as well. I can see they're not built very robust. Nervous about my poor judgement wish I'd seen this before purchasing. Gotta be better choices out there somewhere. Wish EA hadn't gone out of business. Thanks for showing us what we'll need to do in the future! 👏👍

@jwright650 8 ай бұрын

Funny that this came up in my feed, I just came inside to eat a bite and go back out and finish welding on my grapple. Landpride only welds one side of those teeth and the welds break and the teeth fold over...and the factory welds are not that great in terms of quality.

@emilmetzger4177 10 ай бұрын

Only thing I'd point out is, when nailing your 2nd top plate, nail over the studs. This way, if you need to drill through later for electrical or anything else, you're not hitting nails in between studs.

@Austin1994Suloff 10 ай бұрын

Guess you don’t have a torch

@user-xi6xe6yv6i 10 ай бұрын

How much it cost for that

@joshuacaylor881 11 ай бұрын

OHHHHH I cannot wait to get mine!!!! I love that you have the whole family helping

@p.o.d 11 ай бұрын

Nice job keep up the good work ...... Greetings from the Netherlands 👍💪

@fredmasse6451 Жыл бұрын

Hi from France, thanks for sharing . It's very interesting because it's can be my project in the next few months. Please, don't forget to activate the subtitle, it's not on the video #2 and #5. Your five videos make my evenning ! Thank you very much again for sharing. Fred.

@PalsProjects 11 ай бұрын

So glad you enjoyed it!

@Z-Bart Жыл бұрын

Watched your whole build series. You guy's work really well together. 👍

@PalsProjects Жыл бұрын

Thank you! We had a lot of fun with it! Still hoping to put together the rest of the footage for a final video!

@seap9570 Жыл бұрын

Can you list the electrical requirements for the table, plasma and compressor?

@joeyoliver579 Жыл бұрын

Thats great, but how much do they weigh in comparison?

@Dendro2001 Жыл бұрын

Did you leave 1/8" between the osb?

@markramirez33 Жыл бұрын

Good jobs guy!! Brooke you’re a beast💪🏼💪🏼

@tangoseal1 Жыл бұрын

What would possess a person to think they could pull a full sized tree trunk out of the ground with nothing but a small tiny sub compact tractor using a grapple that is made to pick up things that are not attached to 100 foot deep tap roots 2 foot wide?

@skeets6060 Жыл бұрын

I used a little come along and hooded to the end of the grapple and pulled them in place

@jasongrinnell1986 Жыл бұрын

Enjoyed the assembly thank you.

@avatarmong Жыл бұрын

Awesome design. Thx for sharing

@Jake.Gentry Жыл бұрын

It looks like your using 2X6 for framing

@markcole6475 Жыл бұрын

I just got the same grapple….I’ll probably do that to mine before I start working with it ! Nice vid!

@Skyhawk945 3 ай бұрын

Me too, now I wish I'd purchased something heavier duty.

@marknichols7861 Жыл бұрын

So what’s been happening in your world with the table…? Hope it’s working out for you - I just got my XR the other day.

@rksmith5273 Жыл бұрын

All wood that touches cement should be treated, is that not right?

@Born2be76 Жыл бұрын

Stupid music

@RiverRidge27 Жыл бұрын

Very cool. I just got a Kioti 60” ar400 and I need to do something similar.

@andrewh5988 2 жыл бұрын

Professional job

@810Metalworks 2 жыл бұрын

Awesome video.. I just got my Crossfire Pro and it’s awesome. Can’t wait to make some money and buy the XR down the road.

@billowens5399 2 жыл бұрын

is the everlast 50s still working good with crossfire

@PalsProjects 2 жыл бұрын

When we upgraded our table to the XR we also upgraded to a Hypertherm. We didn’t have issues with the Everlast but had always wanted to get a hypertherm for the long run.

@vatoloco1348 2 жыл бұрын

Do you need a torque wrench for this or will I be fine with a regular wrench

@PalsProjects 2 жыл бұрын

There were a few torque specs called out in the assembly instructions but you could probably get away without it.

@vatoloco1348 2 жыл бұрын

@@PalsProjects thanks for the reply I'm getting mine in april and can't wait till it arrives

@markhall6802 2 жыл бұрын

How long did it take to get this from the time you ordered it?

@PalsProjects 2 жыл бұрын

We pre-ordered it in the first batch so it took a few months to receive it.

@justinchelseypetz9559 2 жыл бұрын

How have these held up? Anything thing you’d do differently? I’m about to start my own build using your design. Thanks for the video.

@PalsProjects 2 жыл бұрын

These have held up great and worked well for us! The only thing we would add is a way to tie them down so if you roll forward they don’t swing out. But that hasn’t been an issue, just the only thing I can see adding to them. 👍🏼

@danjones6872 2 жыл бұрын

The fact you have to caulk the water table might be the only thing keeping me from buying one of these.

@PalsProjects 2 жыл бұрын

This set up has been incredible. If that’s the only thing deterring you, I would highly encourage you to reconsider. 👍🏼

@hornbaker 2 жыл бұрын

Have you seen any that aren’t multiple pieces? (At least, where the machine isn’t a fully-welded design that needs most of a truck anyway.)

@johnw4590 2 жыл бұрын

@@hornbaker lincoln electric make one. It's large.. but I think it costs 75,000 bucks

@hornbaker 2 жыл бұрын

@@johnw4590 Exactly. There are tables with one-piece water trays, but they're in a much more expensive category and ship fully assembled.

@johnw4590 2 жыл бұрын

@@hornbaker I'm very grateful Laungmire produces these tables at an affordable price.

@garny3766 2 жыл бұрын

Why did you weld the fork pins in place?! Weld collar bushing on one end of pin and thru bolt collar on other. Make folks removable. Then add in a 2” receiver tube in center of plate ssqa plate for additional function as a trailer mover.

@earlcousins6635 2 жыл бұрын

What's the purpose of the "Sterling Cool" stuff?

@PalsProjects 2 жыл бұрын

Prevents the water table slats and any materials you’re cutting from rusting.

@earlcousins6635 2 жыл бұрын

@@PalsProjects Thanks much.

@cmoneyyyy4418 Жыл бұрын

Did Langmuir provide the sterling cool or was that something you purchased separately?

@GusBrazeal 2 жыл бұрын

Nice work! When I put my gantry on the rails and pushed it all the way back, the left limit switch hit the end about 3/4” before the right limit switch, so it seems like the gantry is not square. The table frame is square, and rail measurements are all right. Anybody have an idea what could be wrong?

@seanmichael5751 2 жыл бұрын

if the table isnt square then the gantry is off or the placwment of the limit switches is incorrect. my cnc machine once got off balanced for some reason (lack of cleaning probably) so i had to readjust it

@Mark300win 2 жыл бұрын

2x6 walls, thats a real decent build not another 2x4 👏👏

@robinmurray9801 2 жыл бұрын

Just a tip if I may..notice when you push the nailer down then pull the trigger it sets the nail but when you hold the trigger and then slam the nailer down you need to set the nails with a hammer afterwards.

@OU8Aspark 2 жыл бұрын

I hope they finished this project. I don't see any more videos.

@PalsProjects 2 жыл бұрын

More to come! 👍🏼

@woodworkingwithdjleblanc6380 2 жыл бұрын

looked at land pride , looked to be built cheap so I bought an everything attachments wicked grapple , built like a tank

@michaelvoorhees5978 2 жыл бұрын

Weight comparison?

@woodworkingwithdjleblanc6380 2 жыл бұрын

@@michaelvoorhees5978 not sure what the land pride weighed , but the EA 55" Wicked Root Rake Grapple Ultra Light 239 pound weight. Upper and lower Wicked Tines are laser cut for precision. Strong 1/4" AR450 steel tines are serrated for gripping and ripping. AR450 Steel and DOM tubing is incredibly strong, rigid and durable. 9" tine spacing. 51” wide lid opens up to a full 36”. 2” bore x 5” stroke cylinders for extreme gripping power! Greasable lid hinges and cylinder pins for longevity. , there is a few videos where he looks to be trying to break it , I know a few people with land prides and they all bent something in the first couple of weeks of use , Ive torturered mine and it has held up very well. I feel I made the right decision

@michaelvoorhees5978 2 жыл бұрын

@@woodworkingwithdjleblanc6380 yeah I have to have one now so I'm gonna have to get the land pride. My cousin has one and it's tough he said.

@rodneycassidy6037 2 жыл бұрын

How do you like the Sterling cool so far? Where did you buy from?

@imkindofabigdeal4308 2 жыл бұрын

What are your plans for managing water/coolant? Are you going to keep it in the tray or move to a separate water storage tank?

@PalsProjects 2 жыл бұрын

Set it and forget it. Keeping it in the tray.

@imkindofabigdeal4308 2 жыл бұрын

@@PalsProjects What's your strategy on cleaning out the table?

@joshuacaylor881 11 ай бұрын

@@imkindofabigdeal4308 I would guess a wet/dry shop vac with filter removed

@metaspencer 2 жыл бұрын

Good. stuff man! on my build list ... cool to see how you did it!

@stevebillow395 2 жыл бұрын

Nice!!! Where did you get your attachment plate

@PalsProjects 2 жыл бұрын

Believe it or not, Amazon!

@stevebillow395 2 жыл бұрын

@@PalsProjects what was the thickness

@PalsProjects 2 жыл бұрын

@@stevebillow395 1/4” I believe.

@rufustoad1 2 жыл бұрын

Keep us posted on how it works and any issues. You might think about moving that electrical box at the end of the table!

@PalsProjects 2 жыл бұрын

We plan to out out another video soon now that we’ve been able to use it!

@GRid-yk2ru 2 жыл бұрын

That's a lot of hard work! You two did a wonderful job on the wall. It's great that you've gone back and added the recent clip of it. The grass really finishes it off! You guys should be proud.

@PalsProjects 2 жыл бұрын

Thanks for watching! We never could have known the enjoyment of building rock walls without having done it ourselves!