16 years later ... Wow ! geil

I have two mouthpieces that he worked on for me. He did one of them. I got it back and loved it so much that I went out and bought another Otto link, sent it to him and told him make it just like the other one so I’d have a back up. They are still my favorite mouthpieces.

I knew him from my dad. He actually died at the end of 1993.

why those comes with 6 slots for pawls ? and only has 3 from factory

#PXB10! 😁.

The seal on the drive side is not mounted correctly, grease is missing and some pawls :) Bitex normally 6 pawls and powerway only 3, which is much louder

Coaster brake hubs don't have this problem.

Thank you

Don't know if you're still receiving or viewing comments on this video in 2023. I have a cine version of the Samyang 35mm (Nikon F mount). My problem is that the aperture ring slowly opens on its own once attached to the camera, so I can't specify a narrower T stop, unless I tape it to secure it. If I use the Nikon F to Canon EF adapter ring and use it on a Canon body, the aperture behaves as it should, so something is occurring within the inner mechanisms to move the aperture to the wide open position - I'm assuming some sort of spring with too much tension, but I don't know. My other Samyang cine lenses are fine, so this is the only one with that quirk. Any guidance on performing a DIY fix?

it's a shame you use your lens caps 🙂 - I just put a UV filter on the lens and you're good to go. I usually throw my lens caps away as I lost many photos in the past by having to take the lens cap off to get a quick shot. Great review - and I'm going to order this pack.

Show the battery gray next timw

Thanks for your great description! I had the same issue with the menu button and your proposed fix worked perfectly 😉 The Edge 500 got now a second life after being replaced by an Edge 520 5 years ago. Best regards from Germany!

Hi, thank you for the helpful video. I just purchased a similar samyang lens but it came already with the aperture ring de-clicked and i'd like to buy that ball. Do you know the exact size of that ball bearing?

do you like canon 1080 video quality ? does it compete with canon t2i's ? how long battery lasts ?

Absolutely no fucking clue about what you are talking about. For the love of god. No one follow this absolute morons advice.

For some years I've had this monopod. Eventually, as most things that get a lot of use, the very last locking clamp (very bottom one) has developed a crack in the casting and as a result, no longer 'locks/secures' the last or smallest extension. So I don't get quite the reach as before. Do you know if this 'extension' can be sourced and replaced? thx for you breakdown.

Efficiency losses? Noise always means energy wasting.

i hate my rear mtb hub its almost as loud as my ex bitching at me...

That women has 5 kids today......

It is possible to take the screen out of the motherboard and then reinstall another one? My garmin works but the screen don't

this was so helpful! I was stressed because I thought I had to properly screw off that darn screw but the push pull to get the lid off the battery area changed my life hahahah

Hola! Perdí mi pelota ¿Sabes de que tamaño es?

Фишай для бедных🙄

Good review actually, I guess the thumbs down are for the sniffing :(

Wow these lenses are made like shit lol. No offense to people who own them (I own an 8mm fisheye from samyang)But damn they are not built well at all. The optics are decent (keyword decent) but that mount will fail eventually and all the plastic parts will give out quickly compared to other lenses. Forget dropping it, its a goner if you do. I'd rather spend a few extra bucks for a used zeiss that will last 100 years as long as I don't drop it.

Hi. I have Samyang 35mm t1.5 but the aperture ring is stuck at 1.5. Any idea how to fix this ? Anyone ? Please.... ; )

I did this to my Rokinon 24mm f/1.4, but omitted the "electrical tape" suggested. Everything was exactly the same as shown here. The lens went back together and works smoothly just fine - no problem.

Hello, What mm nd filter do we require for Sigma 85mm, f/1.4 for Sony E mount. Thanks

Hi. Great video. BYW. can you tell me the brand of ur screwdriver ?? Thanks

This place is still having parties on the weekend?

Glen was a fine gentleman. I sought him out as a young man in need of work on an old buffet clarinet. Little did I know I was in the presence of nobility. I wish I had understood and could express my admiration for his contribution. He was a humble man and I an ignorant pup. Much love to those that went before us.

In September 2019 this is still the best cycling computer ever made. Everything you want (including full suite of power fields, workouts), and nothing you don’t.

The part you think is the pressure/altimeter sensor at 2:18 is actually an antenna connector, the barometric/altimeter is on the other side of the board, close to the usb connector

Listen... this is an old video 2012 but it just saved me $$$$$$ big money. story to long to tell just know you saved me big money

How do you take the front wheel end caps off

What modifier are you using for the ambient light on the Einstein?!

I had to look this up. The maneuver is called The Flapjack. Doubt I'll every do it, but here are instructions. kzbin.info/www/bejne/gIPdZaWFa9Kre6s

I have the same issue with my new Vision trimax 30. When I am going downhill and let it freewheel You actually feel the bike slow down. I don't have this problem with my Duraace C50's nor my Marchiso Zefiro. And I actually prefer softer freewheel clicking anyhow. I want to make a note that the Vision Trimax is a brand new wheel as opposed to the others. So I assume it will quiet down and decrease it's drag after a few thousand kilometers. I really wish there was an immediate fix for it. I appreciate you bringing this issue to the table because the efficiency of the bike is jeopardized to noticeable extents from springs that are too stiff.

Bro, you have to make a video about how to cliking it again

Nice video liked n subscribed

This guy is pretty good!!!

4 parte

Con la sinfónica de holliwod grande juanes

Actually it nothing new DT Swiss has 2 and 3 pawl system, but... If you have more pawls it prevents from wearing out inner ring driver, which happens after few thousands of miles.

Sorry but worst review ever

You snorting ....?

The spring design seems wrong to me. How is it applying equal and correct force to each pawl? My Mavic hubs have tiny springs underneath each pawl so at least the force is equal. I'd be worried about bending that spring at all since it would be unpredictable as to how much spring tension would then be on each pawl. I did notice that greasing the pawls made my hub much quieter. I thought that you were supposed to use a relatively thin oil or grease since you don't want the grease to interfere with the pawl easily engaging the gear surface.

I NEED A DRIVER FOR THIS THING...

That field curvature is not distortion... it's a fisheye. You are also comparing rectilinear lenses to fisheyes, which is kind of apples to oranges. Maybe put down the snort and read up on the subject matter...? TIA

not having the pawls in opposing slots triggered my engineering odc hard! bending the spring a tad looser, and a good helping of the thickest and stickest high-temp grease you can find under the pawls, will work wonders. (ask in a car ot motorbike repair shop or buy a pound that will last you a lifetime for like threeefiddy. actually i have one with me, in case you are interrested. ;D