UGLY

Great video, love it.

Those hoses should be replaced too, may look good on the outside, but has to be breaking down on the inside..

I'd replace the Kia rear end before putting a drive shaft in. Someone took it out for a reason. Probably a banging noise and a front tire that's bald.

youre amazing!!!!!!

Very good job bro

I wished u would of showed hw it sounds after u replaced it 😮

My purge valve is new so why is it still ticking!??

great info was the suv sounding bad at first i have and 08

Where do I get the resistor

Should have run the garden hose over it to simulate rain to see if it works as advertised. I’m using 2x4’s and harbor frieght clamps to hold the tarp tight on the frame. That with this plan will be like a perfect tent.

I thought you were supposed to wrap those back ties around the seat belt bolt for a tighter fit…? I could be wrong, but that’s what I do and no problems.

Looks great!

Question about this unit: Does it have an "agree to the terms" screen each time it turns on? I currently have a similar double din Dual branded Android Auto radio, it drives me nuts that I have to tap agree each time the car starts up before it will show Android Auto. Thanks for your great vids, you earned a sub!

Thanks man! Appreciate these quick and to the point videos. I recently purchased a wrecked 2005 Ford Escape. It was hit in the rear. Attempting to remove the full tailgate for a replacement. Got the plastic panel off and it looks similar. Gonna be tough to release the latch as well as pushing/pulling the smashed tailgate. I'll give her another go tomorrow. Also, I noticed the Polk County plate. I also live in WDM! Let me know if you want to help! haha!

An u fix minds plssss

Thank you!

Thanks for your video!

I lost my manual and this was a huge help. Thanks

Thanks very much for sharing this.

good thing you tore out the old stairs, those were definitely unsafe. new ones look much better

How do I block off a window I don't use and side over it. Without removing the window

Does anyone know if there is a specific sealing for a chimney which is still used?

I've seen videos using exercise balls and ropes... I like your PVC idea because it seems like it would support the weight of snow better. My problem is that the water must not see sunlight. In the winter, we add chlorine and algaecide to prevent bio fouling. But UV will break down those chemicals and eventually allow the water to begin turning green. I used a cover with a siphon pump last year, but the water on top was gunky and a bunch of junk poured into the pool. Took forever to clean that out. I purchased a top that has reinforced grommets around the periphery. My plan is to use a cable to pull the top tight and let the water spill off the cover, but without a bunch of supports, the cover will stretch and tear. I don't know what the final solution will look like yet but I appreciate your ideas- it has sparked a few thoughts.

What is keeping the rain, ice and snow out? It will still fill up

ya dealership quoted me 96$ to change that little light. i said no maybe next time. i drove off to a parts store spent $9 for 2 lights and then at home spent 2 min to change it. i always google and youtube repair jobs before doing it at a dealership, oh ya the time before they wanted to charge me $70 for air filter and install. cost me $20, cool thing though the mechanic came out as i was leaving and showed me how to do it myself. even they think the company over charges

Do you have a video or link for the hard reset for the AC for the 2011-2014 MXK. Mine was working great and now the fan isn’t blowing at all! HELP

Hello I just got my first skid steer a 310 I think, not sure because it was sandblasted and powdercoated no numbers on it now looks the exact same as that one, I want to check the hydraulic oil level but I can't find the tank for it , any help would be appreciated

i installed tow mirrors in my ram but puddle light is no working i tried alfa obd too please help

Man, I need a video on how to replace the headlights on these cars. I can't figure it out for the life of me and nobody has a video anywhere. I can remove the dust cap but can't see how anyone can possibly get the bulb out of there. Some forum posts say you have to remove the whole front end of the car and pull the entire headlight assembly out. Others seemingly are able to do it from under the hood, but none of them have any video or even pics.

The video and comments are like a 2-piece puzzle. Awesome video + leave spacer on the back = super helpful. Thanks for making the video.

Where is the bypass intercooler valve located on a 2017 Buick Encore 1.4

Thanks for the video!

This fix was great and surprisingly easy. well done! However, my headlights are not working now. Every other light works. any ideas or suggestions. The fuse is fine too. thx

The Dog watching like he’s a devoted fan.

Thank you

Any idea of the part numbers for the belts on this thing? I have one and not even bobcat can seem to get the right v drive belt to me…

4 cylinder? Or 6 cylinder? Is the same location?

Thank you

Hey I know this is an old video but I appreciate the help I just hooked one up after watching you thanks

Very cool. That turned out great. Nice TJ!

Excellent idea!

I’m about to do this with my 06 TJ… and I’m terrified😳🙏🏻

Hey help me out if you will please . I bought a new use hatch from a junk yard for my 11 mariner and now I cant get the latch and the window latch to work . Should I just use the latch from the old one I already changed the window no luck. Hopefully you have a idea. Thanks

Was the shaft size for the clutch the same ?

I have replaced latch as instructed and plugged all in its place. Window pops open but new latch doesn't pop open as it should? Where else do I need to trace the issue? Thanks for the video! it helps a lot. detailed thoroughly!

Where did you get the fittings for the large filter?

Is this the same for a 2018 MKZ? I’m trying to replace that part but I can’t find exactly where it is.

I love this idea…..I have an 18’ round and want to create something similar. But flat🤷‍♀️🤦🏼‍♀️ I want two halves that come together lol I can picture it in my head. Think of a trampoline but not bouncy

How has it held up so far ?