Does he say "without further 'toodoo' " instead of "within further ado" ? 😂😂😂

I wasnt really impressed at all with mine and sold it. I have k390 though. Kinda want to try that again. My steel snob days are almost completely gone though, geometry is what gets me going these days and ease of stropping back. Aus 8 was insane back in the day for how easily it would come back to that nice crispy edge. Do you have a favorite steel?

Test the manix 2 salt magnacut. Ive been seeing low numbers on it.

I prefer the delica 😅

You need less. So it can oxidize better. No hating but helping. Like 2/3 less mustard

Sounds like an excuse to cut cost😂

Hi what do you think then why would the S90 be so much cheaper? What do you think about the K390 and or S30V? which is the better steel to sharpen ? Im looking at the Spyderco para mil 3 in s30v is 150 and in the S90v is 260. do you think it would be worth the extra price?

My Cruwear knife rusts easily, 3, K390 knives not at all.

No nails use the toothpick figure it out.

I like the length of the video it is nice to listen to while i clean

Awesome knife damn

Late reply to the video but I finally bought a k390 Delica. Black Friday for $99. Been worried about the rust but this video convinced me to try one

Check out Knife Steel Nerds, they have a big list of steels that show their Toughness, Edge Retention and Corrosion Resistance. 52100 is like 1095 but on steroids in terms of toughness, and it has slightly better edge retention, negligible CR.

Thats got to be the least graceful knife control iv ever seen im curling my toes watching in fear for her fingers

Greetings from a Tiny Island in Maine, USA I like to try to carry a 1 hand opening knife in 1 pocket and a SAK in the other. I have a variety in both Alox & cellidor scales that never let me down.

Yo hold up how’d you get it to flip open so fast? Mines tough

does it have indiglo feature when you press crown entire dial glows that one

I think all the lightweights only have one pivot washer which is going to make it off-center

I love sharpening, and from that point I'd rather buy 14C28N over Nitro-V. Despite of all my attempts of using different stones and angles, the 14C28N keeps the edge longer.

Did you acid etch over the engravings? It looks sick all bare like that!

Which product do you think works better in very cold weather?

I think the only issue anyone would have sharpening s90v is when it's burnt from the factory.

I wish Benchmade would go back to 154CM. It's easier to sharpen than S30V & less chippy. I've had my 154CM mini Grip for years.

I first saw the steel on a sitivian knife and am curious about it. Certainly looks better than budget steels. I would reccomend cleaning your ceramics, i use brasso. Its instant clean. And the makers of ceramics do say they are impervious to chemicals and theyre harder than the silica abrasive in it, ive had that debate before lol.

Why wouldn't you want it right 😅..man imagine if it came with a sheepsfoot blade 🤯

Thank you soo much I just got a giant mouse ACE with a natural canvas micarta is noticed a dark spot that wasn’t there when I opened the knife and your video helped me!

I have a Bugout. It works fine, and it's much stronger than it feels. That's a good thing, because it feels cheap as hell. I have a couple tiny Spydercos and just ordered a Para 3. If the Para 3 works as expected, I will sell the Bugout.

Why did miguron drop the DC53? No one uses it, but it’s just a better D2 DC53 is to D2, what Magnacut is to Cru-Wear Slightly less edge retention, much higher toughness and more stainlessness D2: 1.6% carbon, 1% vanadium, 12% chromium, 0.5% molybdenum DC53: 1.1% carbon, 0.4% vanadium, 8.5% chromium, 1.1% silicon, 2% molybdenum While D2 requires cryogenics to reach over 60 HRC, DC53 can reach 62 HRC at similar temps, and without cryogenics All in all, this should be in more knives IMO, Imagine a Civivi Vision or a Kershaw Iridium in DC53!

Agreed on all counts. Takes a keen but stable edge, holds it a long time, strops well, not difficult to sharpen. Also agree it’s the best deal. Got a like new k390 leafjumper with stock clip and a lynchNW clip for $99.

Cruwear is very underrated. I had a edc fixed blade in Cruwear at 65-66hrc made by Bless Knives that smoked the K390 Strech 2. Sounds crazy but it’s real.

Hey Fletch I would like a little strop likee the one you made Erica ca you give me details

Sounds like cruwear might be better for me. I have an issue chipping on my VG-10. Either are better than VG-10. Cru being easier to sharpen since I’m no expert.

But what about 10v and 20cv available now?

I'd choose this over the Tenacious all day, everyday!!! 😀

Great knife. Love the style, ergonomics, grind, back lock, price, Made in USA. Not much to dislike about this one

Cruwear is my favorite. Tried a bunch like s35vn, s90v, m4, k390, m390 and found that I wanted tougher steel to take to my construction job every day and the object became finding something that still had good edge retention. 3v was just a tad mushy on the stones but cruwear is crisp.

good review thank u

I know they are looked down upon but i really love spyderco’s lightweight frn scales. I have plenty of wood and g10 scales but for pocket knife use spyderco frn is my preference. Love the scales on your para 3. I got a like new leafjumper in k390 off ebay for $100. It came with a ~$30 lynch clip as well as stock clip. Best knife deal ive ever gotten and it wont leave my pocket. A bit early to say yet but it might pass my caly 3 in zdp-189 as favorite spyderco ever.

My javelin in magnacut with the double hollow grind is being shipped out today. So stoked to get it in hand. 7 month lead time currently wasn’t bad really.

From all of my stainless only s90V had a great fine edge and now that amazing Spy27 did just as well.However I prefer Cru Wear/PD1 and 4v but they're not stainless.

How's your watch functioning?

14C28N and Nitro-V is great steels. They aren’t “super steels”, but they are great. I much prefer a great steel that isn’t a “super steel”, over a “super steel” that isn’t great.

CruWear and 3V are my favorite fixed blade non-stainless steels. But it's so tough it's almost not worth having in a folder, so looking forward to trying a Delica 4 in K390 soon.

Did you wipe off the coating of your knife just by using a stone? I'm probably going to do that to my pd1 Man Bug

I'm trying to understand the difference between cruwear and pd#1 but they are almost the same steel

What I don't like about this knife is that coins will get in the back of the frame and dull the blade unless you carry it in a slip or an empty pocket. I'm thinking about making a spacer for it.

All my favorite ones are S45VN. It really is a work horse steel

I got a Manix 2 XL in CruWear along with a Spyderedge Temperance in CruWear for now. I definitely plan on getting more, Spyderco CruWear is absolutely astounding in performance

Thank you, you answered all the specific questions I had re DC53. I watch so many knife/steel reviewers. I watch the vid to the end and most of my questions are left unanswered. I don't have time to waste, your review was informative and CONCISE. Thanks again. ✌️💙

I freehand sharpen all my knives and my favorite one to sharpen is the S 30 V the absolute worst would be the S110 V. My favorite all around is the Maxamet. I just bought a paramilitary two in S 45vn and I’m excited to sharpen it and see how it feels and performs.