2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@AltoidJTP Күн бұрын
Always a pleasure to find one of your tutorials when I need one. Good to see you again, old friend!
@tjorvijons Күн бұрын
I've been trying to do the second method, the multi channel one with Interfaces as I'm playing FTB Infinity Evolved Reloaded (dont have pattern providers) and it doesn't seem to work? Maybe this block is not the same?
@msipp3790 4 күн бұрын
i hate the pattern provider, it is so much more confusing than the old way.
@timmyingelbrecht6977 9 күн бұрын
Hello, thank you for you guide, it seemed very compled at first but you made it understandable. I do have a problem though: I used the setup in in the second half of your video, everything seems to work (although it took me a few minutes i should remove the inscriber press' from the crafting recipe :p) but it only makes a few of them each time. the me interface stops at 58 out of the 64 printed silicon thats permantly ordered, and the others just seem to make only 30ish % of what i ask. i ask 10 i get 3,i ask 20 i get 4 processors, etc. ..
@timmyingelbrecht6977 9 күн бұрын
Eh, solved the issue, it was kinda dumb ... The Extended inscibers ( thats what the advanced inscibers are called now, in all the mods10) can do 4 crafting jobs at the same time. what happens is i request 10 processors, it sends 4 to the first for example and then the rest to the other crafting inventories of the same insibers, and those crafting inventories didn't have a insriber press yet, so they got stuck there or crafted diamond/certus dust.
@C4r0m3215 13 күн бұрын
If someone can clarify for me. I was trying to figure out how there was so many channels. In the storage area, there was 32 drives connected, taking up 32 channels. Does the p2p tunnel turn those 32 channels into 1 channel on the main line? Is that how it works? And does it work that way because it's taking those 32 channels and putting in on 1 face of the me controllers in the main hub?
@therealtkh 10 күн бұрын
Yes, sounds like you got it right! Note that the one channel in the "P2P network" is used for one entry OR exit point. I have controllers in the P2P network but this is not always required, but channel count is always important. With a normal (thin) cable, four channels can be sent through as there are 4 + 4 entry and exit points. With a controller in the middle, it would be able to handle double the amount. I have made several videos on how P2P works, you can find them in the AE2 playlist.
@muhammedikramullah4406 14 күн бұрын
Kind of terrifying to realise these only 3 commandos r responsible for the massacre of the whole place
@ScottGodin 16 күн бұрын
it's important to note that on the side making dusts, the storage bus needs to accept both crystals AND dusts, so that on the off chance the growth accelerators are on making crystals and the dust side gets fully grown, it can still break that crystal and import it so it can kickstart the dust making process. otherwise it gets stuck.
@Salvadorean11thst 22 күн бұрын
Running through gunfire and Montes saying "I got you buddy" with BF theme playing gives me chills. Such a great campaign.
@abba3642 22 күн бұрын
Krasny pałczon krasny paczon☆°
@TheMietz 25 күн бұрын
and whats the by bind for ordering?
@therealtkh 23 күн бұрын
Middle mouse button is the default key bind to order. I hope this is what you asked for.
@phdanime1126 27 күн бұрын
hey man, building this in 1.20.1 atm9 and i dont think it works anymore. My autocrafter doesnt seem to recognize the pattern inside the ME interface. not sure if im doing something wrong, but everything is connected and powered.
@therealtkh 27 күн бұрын
After 1.16 (or so), they changed the ME Interface behavior and split the functionality into the "Pattern Provider". So all old videos where the ME Interface is used to store patterns it should be replaced by the Pattern Provider which is used in the same way in that aspect.
@phdanime1126 27 күн бұрын
Thank you so much @@therealtkh
@ReticularTunic7 Ай бұрын
which one of the thermal mod packs have the mob ball?
@therealtkh 28 күн бұрын
It should be the "Expansion" mod. teamcofh.com/docs/1.12/thermal-expansion/
@spooky2577 Ай бұрын
I’m having an issue where I can’t go past a 3x3x3. I have enough power and enough channels, does anyone know what my problem could be??
@therealtkh 23 күн бұрын
Sorry for late answer. Is it also a problem in creative world with creative power cell? What storage cell are you using? What mod version or modpack are you running? Always good to provide that as well in case some modpack change the rules.
@Riley-v1k Ай бұрын
11 years later still, thank you!
@mauricio2647 Ай бұрын
You are a God
@skulfate Ай бұрын
my man out here almost a decade later making it possible for me to be the backbone of infrastructure my server needs, thank you kind man.
@therealtkh Ай бұрын
Thank you! I'm happy to hear that these old videos are still helpful (even though mod has been somewhat updated over the years) :)
@TrainspottingSEQ Ай бұрын
unintentional asmr
@Goremize Ай бұрын
Hello from the future, thank you for this! :) Great help!
@user-tw5ht2ns3h Ай бұрын
Hello brother is there way to extract json text to translate it then paste it again to json
@Anime-yellow Ай бұрын
What do you do with it?
@therealtkh Ай бұрын
What do you do with a bucket with a liquid? My most common usage has been to set fluid filters in other blocks, but it depends on what mods and needs you have.
@chikko_five Ай бұрын
i just can't figure out. in case when pattern provider is connected to mechanism directly, it puts ingredients into the block and then takes end product out of it. BUT when patten provider is connected to production block through interface and then storage bus, it only puts items into mechanism, but doesn't take end product. it requires taking it via export bus. why can't it just take out the product by itself?
@therealtkh Ай бұрын
Hi, there are some crafting blocks that supports automatic ejection of products which works perfectly with the Pattern Provider, I don't know exactly what mechanism you were thinking about but I think your summary is the reason for this: if connected directly - sometimes you don't need any extraction method, but as this build is using a separate network to handle all parts, the Pattern Provider cannot get the items automatically, so we have to export them back to the main network once completed all steps.
@tsvk1 Ай бұрын
this has to go down in history as one of the absolute worst level designs of all time, holy shit
@buffysummers6190 Ай бұрын
I am on 1.7.10 it Doesnt work to make the patterns
@therealtkh Ай бұрын
A bit short on info here, what modpack are you running? The most common mistake is when making patterns. Change to "processing pattern" and place items manually instead of using standard recipe (from NEI/JEI).
@eugenewong81998 Ай бұрын
the me interface doesnt have the pattern slot UI on 1.19.2
@therealtkh Ай бұрын
Yes, you have to use the Pattern Provider instead. Please check video description for info and links to updated builds.
@eugenewong81998 Ай бұрын
@@therealtkh great thank you
@elicareyva 2 ай бұрын
amazing tutorial genuinely saved my sky factory 4 game
@martincassidy2102 2 ай бұрын
good for storing ores stops something like a common ore *iorn/copper flooding your drive
@4906 2 ай бұрын
For some reason, this video won't play anymore. bitrot?
@therealtkh 2 ай бұрын
So weird, I have not experienced this before! I cannot play it on on computer either. On mobile it did play, but had no sound. Not sure what to do... I guess reach out to YT support if it stays this way...
@therealtkh 2 ай бұрын
Might have been successful in initiating the encoding process and it seems to work now for me. Please check and I hope it helps.
@4906 2 ай бұрын
@@therealtkh seems to play now, thanks
@theopoldthegamer4284 2 ай бұрын
Oh no, the video data seems to be glitched
@therealtkh 2 ай бұрын
I tried something and I think it works now... Please check!
@Th3Psych0hippy 2 ай бұрын
Great video, even 7 years later lol. thanks for the info!!!
@Abyss8564 2 ай бұрын
Instead of breaking 1 boat, there are three layers of boats, not 2, hence I have to destroy 2 boats This is because the first boat doesnt float and always just sinks for some reason
@dimitarsamokovski2916 2 ай бұрын
So I played around and it works on 1.12.2 Instead of marking Filtered Operations on insert only (because it doesnt exist), add the respective circuit in the filter of the respective bus, and add all 3 processors in the filter on the last inscriber (where the redstone is). Also huge thanks TKH, youre the AE2 goat.
@Sol-hm7ol 2 ай бұрын
ANYONE HAVING PROBLEMS WITH THIS IN 1.12.2 PACK HERES THE FIX 1. include the printed circuits as well as the raw materials in the storage buses on the 3 inscribers at the bottom and leave them on the default "bi-directional" mode. 2. include each of the final printed circuits as well as the redstone in the storage bus of the final inscriber and again leave it on the default mode.
@pvzgamer123 2 ай бұрын
God bless you man!
@Jakijaki1990 Ай бұрын
BROO U saved me!! God bless u!
@mccucgames5309 3 күн бұрын
God bless you man!
@hamon3206 3 күн бұрын
May God bless you abundantly for your generosity and grace. You have been a true blessing in my life, and I’m incredibly thankful for you. Wishing you endless joy, peace, and prosperity in return for all the goodness you’ve shared
@paulohenriquedossantoshenr1860 2 ай бұрын
Essa parte é a mais difícil tá doido
@BubblegumDog_ 2 ай бұрын
So I couldn't get this to work in either Enigmatica 2 Expert nor Meatballcraft. I think I ended up making my own design for E2E. For Meatballcraft I copied this and realized that in the storage buses where you put the diamond, gold and pure certus quartz, you need to put the corresponding circuits in the storage buses as well. (E.g one Inscribers storage bus will have gold and the logic circuit which is its corresponding circuit) There must be a difference between this AE and the version I'm playing with since the storage buses in this video clearly allows the circuits to travel through the buses. But it defintely doesn't work in the version I'm playing. As soon as you've configured the storage bus it appears it will ONLY do anything with those items, whereas it looks like in this video it will still give other stuff away through the storage bus.
@JonTopping 2 ай бұрын
Is this outdated now with newer versions? I installed every thermal mod I could, because I love your work, and I'm not seeing "retriever" shower up in my JEI. Using 1.20.1.
@andrewgreeb916 2 ай бұрын
Thanks I never got how to actually use these before it helps a lot
@The_Infernal_Machine-od2bh 2 ай бұрын
Nevermind man, it was because you actually have to pick the disk with Jake *JUST* before he dies.
@The_Infernal_Machine-od2bh 2 ай бұрын
Fuck I know this video is 9 years old but why the hell can I not pick it up? Like, I'm here with Evan with Jakes clothes in front of him and I'm pressing the pick up button and it doesn't do anything, im playing on PS5
@The_Infernal_Machine-od2bh 2 ай бұрын
thanks
@GrizzlybearKB 2 ай бұрын
i know im late so probably wont get a reply, but ive done everything, but then it just says im missing the printed silicon, while there is normal silicon in my system?
@therealtkh 2 ай бұрын
It sounds like your pattern is wrong. You shall only have the basic items in the pattern, the "printed" parts will never be in your system. Check carefully how the pattern is made (at around 5:10), and also check my updated videos on this build that might be useful depending on what version you play on.
@LucasCimera 3 ай бұрын
I know this video was done a long time ago, but do you know the background music you use?
@therealtkh 3 ай бұрын
Seems like you didn't look through the video description text ;) For licencing reasons, I put that text in all my videos where I have used other music than only in-game background music.
@brickatick 3 ай бұрын
Is there any way you can have two on the same system at a time for better efficiency? I'm trying to make a really fast ME farm. Incredible design btw, musta took you hours <3
@therealtkh 3 ай бұрын
Happy to hear you liked the build, thanks! Please note that the build might need changes depending on what modpack / game/mod version you play. Check my AE2 playlist for additional builds and info! Regarding higher efficiency: start with upgrading the Inscribers with Accelerator upgrades to make them faster, if you need additional speed you cannot simply place two because it will mess up the order. You can use other methods and mods, check my playlist to see some other builds to speed things up :)
@brickatick 3 ай бұрын
@@therealtkh Thank you so much, I’m playing Sky Factory 4, and have already used the accelerators as I am quite accustomed to this mod pack. I tried replicating another one connected to the same system but it just breaks both. They are both perfectly built and work when one is disconnected from the other, but how could I get both to work?
@brickatick 3 ай бұрын
@@therealtkh and evenly split for extra efficiency (I don’t wanna use two ME systems…)
@CardosoNeto-w9p 3 ай бұрын
Muito bom...
@sokka2774 3 ай бұрын
dont seem to work on 1.12.2 sadly the autocraft dont appear on my system
@therealtkh 3 ай бұрын
This is a different mod than what we have in 1.12.2. Check video description, I have a link there to a video for the old mod version.
@megasmit 3 ай бұрын
THANK YOU for this. working on finishing sevtech and needed a way to automate modularium and invar. it worked flawlessly.
@therealtkh 3 ай бұрын
Happy to hear it is useful, I haven't had any particular use for this build myself in a normal world. Thank you :)
@jeanvandenberg8986 3 ай бұрын
As a tutorial. Not good. A lot of rambling and you didn't do a step by step explanation of how to build the excavator.
@oldfarks 3 ай бұрын
finally a simple explanation of the system setups. thank you
@notnabi9595 3 ай бұрын
thank you so much for making this video as i've looked over on the internet trying to make a potion pattern but couldnt find anywhere on how to (unless im stupid) but bc of this vid i was able to encode a swiftness potion pattern for my upcoming farm builds in skyfactory 4. once again i Thank you a lot.
@therealtkh 3 ай бұрын
I am truly happy to hear it was helpful, thank you :)
@jonathanzimmermann5877 4 ай бұрын
i built this part for part and the icon that sayys craft in the terminal does not show up. any ideas?
@jonathanzimmermann5877 4 ай бұрын
i also do not have a section for patterns on the first me interface, i only have a config section
@therealtkh 3 ай бұрын
Always provide game/mod/modpack version as the mod has changed over time. But if you don't have slot for patterns you are probably running a newer version than this video was created for. Use Pattern Provider and check video description and pinned comment for more info about newer version.
@CallmePhoneix 4 ай бұрын
Let me tell you for so long I tried to learn p2p buy never now i finally understand you dont know how much you helped me