I just picked one of these up and am having this issue. I’ve glued the head base and reshaped the spring, but the issue persists. Is there anything else that can cause this?
@3rdisland4777 күн бұрын
@@_sethweaver no thing more, make sure you did the prosess accuratly and the spring make enough tension to move the head base You can send it to me for full refurbishment for $50
@leololol916519 күн бұрын
I have the same problem and the same symptoms with my machine, is it possible that this resistance problem is also present on mine?
@3rdisland47719 күн бұрын
@@leololol9165 hi, this is a fuse risistance, go ahead and short it ans see if it solve the sound issue
@leololol916519 күн бұрын
thank you for the advice What do you mean by short circuiting the resistance, should I replace it instead?
@robertmasonofficial26 күн бұрын
HI, GREAT VIDEO! I just picked up a 260 but the tape head wont engage and and nothing turns. Also, the STOP button is a bit broken. Can we speak about me shipping it to you for an overhaul? Thanks!! :)
@3rdisland47726 күн бұрын
@@robertmasonofficial Hi, thanks for your comment, contact me on: [email protected]
@robertmasonofficial26 күн бұрын
@@3rdisland477 message sent! :)
@_ponkachonkaАй бұрын
I tried both steps - the 1st one seems to be the problem, the FF/REW selector gear is moving freely after cleaning and lubrication but the mechanism only works while upright, when laid flat the gear doesn't move when ff/rew is selected or when pause is pressed. Any possible explanations? Thanks
@3rdisland477Ай бұрын
@@_ponkachonka check the ff/rew belt, check the ff/rew main mech gear if it's stucked,
@_ponkachonkaАй бұрын
@@3rdisland477 The belts seem to operate OK and the actual rewinding mechanism does function, it’s just not engaging in the first place if it isn’t tilted upright so I don’t know if the selector gear is chipped? In any case I could try a belt replacement…?
@deebaker4671Ай бұрын
Thank you so much, I followed your steps, on my porta two deck, but it still isn’t lifting high enough to touch the rollers to play. Can I buy that piece from somewhere or do you know where I can buy one at ?
@kidsbikerecycling842Ай бұрын
My Porta 03 has the same problem. Do you think it's ok to use a 2SB649A transistor to replace the original? I couldn't find a B891. Thank you so much for your videos! Here it is 7 years later and many people are still finding them so helpful.
@3rdisland477Ай бұрын
@@kidsbikerecycling842 hi, I did not tray B649, use 2SA715, it's available on ebay
@PORTA777Ай бұрын
I always find your information useful. Thank you. I have a PortaOne and I can hear the input sound and record to tape, but when I play it back the tape works but the vu meter doesn't move and no sound comes out. Can you give me some advice?
@3rdisland477Ай бұрын
@@PORTA777 thank you, hearing the sound does not mean it's being recorded, check the recording (LED) recording indicator when you press (record) it should converts from blinking to solid, if not, check the micro switch on the end of the cassette housing which is activated by the cassette recording/ safe toung, clean and make sure that it makes contact when inserting the cassette in, Good luck
@PORTA777Ай бұрын
Thank you for your reply. When I play a tape recorded with Porta One on another mtr, it is recorded, so it seems that the playback function of Porta One is broken. I think it is a mechanical failure, not an operating error. Thank you in advance.
@The_AbsurdisttАй бұрын
Excellent video. I'm curious why WD40 was used instead of a silicon grease or lithium grease. Cheers.
@3rdisland477Ай бұрын
@@The_Absurdistt depends on availability
@captainradio5894Ай бұрын
Thank you ! I can’t believe how quickly you made this video. I’m glad to see it’s a very simple power structure. I’ll be opening it up later this week.
@captainradio58942 ай бұрын
Hoping to find a video on “won’t power on”
@3rdisland4772 ай бұрын
@@captainradio5894 tomorrow I will make a video for you
@captainradio58942 ай бұрын
@@3rdisland477 that would be amazing. Since making my comment, I’ve at least learned my AC adapter had the wrong polarity. Ordered a correct one. But that doesn’t mean it’s going to power up. I found the porta 05 HS at a thrift store this morning.
@3rdisland4772 ай бұрын
@@captainradio5894 watch this video kzbin.info/www/bejne/hqmmiYJ7hbJqmNksi=9L8xvIObkWmcMzh3
@madhatter-18912 ай бұрын
Because of this video I just repaired my tascamPORTA02MKII, thank you!
@3rdisland4772 ай бұрын
@@madhatter-1891 good luck
@kidsbikerecycling8422 ай бұрын
Thank you so much for this great video! I I had never replaced caps on a PCB, but this video helped so much. My Porta 02 is now working great.
@3rdisland4772 ай бұрын
@@kidsbikerecycling842 so happy that my video could helped you to get your machine works again
@beatbike12 ай бұрын
Amazing!!!!! I'll need to buy some cassettes now!
@OneHellOfASandwich2 ай бұрын
I already ordered a belt, but out of curiosity: I use my 280 quite often actually. I was trying to make a short term substitute belt using a skinny rubber band while I wait for the proper replacement. Tension was a little high, but it fit. Only issue was that it kept falling off the flywheel after a few rotations. Is that to be expected for a belt that’s not the right size? Or is this issue likely to carry over to the proper belt, meaning I must fix something that might be wrong with the assembly?
@gustavoinfante2 ай бұрын
Thank you very much for sharing your knowledge! incredible! One question, after carrying out the repair as you did in the video, is it necessary to calibrate the equipment?
@3rdisland4772 ай бұрын
@@gustavoinfante both ereas and playback/record heads should be calibreted and alignment to the 4 track paths of the tape, otherwise heads will not read or write on the exact path and tracks wil be interfere in each others
@gustavoinfante2 ай бұрын
@@3rdisland477 Thank you very much again, I'll look into how to do the calibration! you helped a lot!!
@b33lz2 ай бұрын
Question about the first Tascam in the video, I found one for like 20$ but the record and play button will not press down. What causes this? Any info is appreciated.
@3rdisland4772 ай бұрын
@@b33lz normaly record button does not pressed down with no cassette or with a protected cassette othewise there should be a mechanism issue
@b33lz2 ай бұрын
@@3rdisland477 I see, thx for the reply. I'm watching this video to learn, thx you.
@oinkooink2 ай бұрын
I have the Japanese version of the 464. It has no XLR, but has BBE sonic maximiser.
@3rdisland4772 ай бұрын
@@oinkooink that's the most advanced version of the analog tape recorders at that time
@oinkooink2 ай бұрын
@@3rdisland477 Yeah about 1991 I think hey. I'm going to put some songs up on youtube eventually.
@Francois-k1x3 ай бұрын
Hello 3rd Island, thank you so much for sharing all this knowledge, it saved me so much time already! I was wondering if you knew anything about a X-28 not rewinding? All other functions works, when i press Rewind, it starts 1sec and then literally switches off, screens test all position. Like a false contact? I took it all apart, plugged it, the tape rewind fine when the module in my hands, other boards like the mixing board taken off.
@3rdisland4773 ай бұрын
@@Francois-k1x thank you for the kind comment, let me ask you question ; when you press REW.. do you get a REW sign on the display ?
@Francois-k1x3 ай бұрын
@@3rdisland477 Hello, thank you for taking so quickly your time for answering. I think it does turn on. Just quickly and then switches off. I just tried more things, as I said it seems to work some times (the REW). It did again and i found out that while plugging (P604) the red socket (it carries +5V, -5V, GND as well as Mute) to the mixer board. So Not sure how but the mixer board might have a dead component? a short circuit of a kind, thought I find it strange that it only appears with REW. Getting closer to the problem...
@beatbike13 ай бұрын
I have a MT2x that I would like to get functioning again. I imagine that you take in repairs? If so, could you send me to your website?
@3rdisland4773 ай бұрын
@@beatbike1 I don't have a website, but I can do repair for your machine, you can contact me on my email: [email protected]
@qbslc3 ай бұрын
Very useful video Thanks a lot!
@hitmn20113 ай бұрын
Thanks my friend for sharing the video and useful information. Greetings from Egypt
@3rdisland4773 ай бұрын
اهلا باهل مصر الكرام، اگدع ناس
@thermionicemission81363 ай бұрын
I just had the same issue with my Fostex 380S. I burnished the switch contacts with some notebook paper, and it took the corrosion off of the switch contacts. This was a thing we did with old rotary telephone stepper switches way back in the 80's and 90's. We used paper if we did not have a hand burnishing tool. Using very fine grain sand paper will work okay since these are low voltage low current switch contacts. Your video helped me diagnose why my unit would power on and just have all of the display elements lit up indicating an error condition. So, this can also be applied to the 380S model. Now I have to find out why the heads and Capstan are not functioning.
@iDiyYoyo-lf4so3 ай бұрын
Good idea ❤
@qbslc3 ай бұрын
Great video ! Thanks
@bobthepog3 ай бұрын
Great video really helped. So I got the Porta two working. Everything seams Ok. Only problem is the pause button. It works fine but does not stay engaged. If you let go it starts again. Any ideas how to fix this would be appreciated. Thanks .
@3rdisland4773 ай бұрын
Thanks, there is 2 parts under the pinch roller, the plastic lock toung and a spring, check these 2 parts and clean if any sand in the groov
@bobthepog3 ай бұрын
Hi super thanks, all working now. The white plastic lock was off to the side a bit. I pushed it back over the pin for the pause. Top man, many thanks.
Reckon I could make a 240v one for my 424 mkiii in Australia?
@3rdisland4774 ай бұрын
Good luck man, it's so easy
@oinkooink4 ай бұрын
@@3rdisland477 Maybe. might be hard to source the right parts...transformer. Someone said they are only available NOS these days. Not sure. Alternatively I could buy an American copy at 110v and use a stepdown transformer here in Australia.
@qbslc4 ай бұрын
Hi ! What type of grease do you use to lubricate the sliders? Thanks you
@3rdisland4774 ай бұрын
Heavy grease,
@qbslc4 ай бұрын
@@3rdisland477 thanks you!
@achillemauroporcheddu625 ай бұрын
Thanks to this Video, today I repaired my two TASCAM PORTA TWO ! Thank you so much. 💝
@3rdisland4775 ай бұрын
Good luck
@notapplicable3285 ай бұрын
Hey! My MT2X is having a problem that i don’t quite understand. There is a tape stuck in the machine and the motor is stuck running in play. I believe i saw on another video someone say that the buttons to control the tape mechanism are mechanical not solenoid driven. I have not opened the face of it up as i am not an electronic guy. Is this something i could possibly address or would i be better off taking it to a professional
@3rdisland4775 ай бұрын
Yes this is true, MT2X is half auto mechanism and not solenoud, you can release the tape by pressing the head base backword by screw driver and meanwhile pull up the cassette from the housing using your finger The defect is a slack belt, you can then open the machine and replace a new tape Goid luck
@notapplicable3285 ай бұрын
@@3rdisland477 thanks so much for responding with some help! I’ll have to try this out today!
@notapplicable3285 ай бұрын
@@3rdisland477 thanks so much for responding your help got me some progress! so i was able to get the tape out of the machine by compressing the head base. I’m confused still why the head is stuck up, and none of the buttons have any effect. I can hear the machine making a whirring noise that i don’t remember it making (but i haven’t tried to use this thing in a couple years so that may be normal) and it seems to be coming from the tape mechanism area. It doesn’t seem like the mechanism is playing however, as the tape gear arms aren’t spinning (sorry i don’t know the terminology) any ideas or suggestions would be appreciated. I really was not expecting a response and i really do appreciate your help
@notapplicable3285 ай бұрын
Just an update. There is definitely something stuck running. When i adjust the “pitch” slider i can hear the what ever is moving speeding up and turning down with the tape speed
@foundatlantis5 ай бұрын
nice to see you again 3rd island fixing 4 tracks ! i have a few mt120 that all have mixer problems, poor gain on various tracks. these mt120 all seem to have similar problems
@3rdisland4775 ай бұрын
Hi, do you want to send'm to me for fixing ?
@foundatlantis5 ай бұрын
@@3rdisland477 it would cost a fortune in shipping costs to send to USA from UK..
@mcrstr5 ай бұрын
Another good repair! Thank you for uploading
@HASSAN-xz2rg5 ай бұрын
🫡🌹
@crusingandbrusingtv38246 ай бұрын
Better than original
@projectnull6 ай бұрын
Just fixed a second hand porta one that had a similar problem - the pinch roller was not fully engaged against the capstan and I realised the spring broke the plastic part you have shown, thank you immensely
@3rdisland4776 ай бұрын
Good luck
@prisonoffleshh6 ай бұрын
Bro how the fuck did you just pop it open 😭
@prisonoffleshh6 ай бұрын
Can we put poop in it?
@3rdisland4776 ай бұрын
There are a couple of plastic tongue locks you have to release'm after you remove screws
@suejackson23047 ай бұрын
thank you!!! this worked so well, i was so worried that i wasted $250!!
@3rdisland4777 ай бұрын
Good luck Usualy I sell this model as a perfect condition for $170 on my ebay account
@nullbaby7 ай бұрын
Great video thanks for posting ❤
@saintpete8087 ай бұрын
thank you!
@VoDZiqo7 ай бұрын
Hi, thank you very much, your videos are great. For me the spring is completely broken and impossible to find the name of this type of part... Do you know where I can buy this part please? THANKS !
@3rdisland4777 ай бұрын
Thanks for your kind comment, No any replaced parts, only reshape the spring, Good luck
@MattLabush7 ай бұрын
This worked. Thank you!
@mealew7 ай бұрын
@3rdisland477 Are you available for repair still? My husband has one of the Porta05 in pristine condition, original box etc but there is a tape stuck and he believes the play button was stuck in the engaged position. I don’t want to risk damaging it further by trying to fix it. Thank you!!
@3rdisland4777 ай бұрын
Hi, yes, I can do repair for your porta 05, But I will be out of the US untile the begining of April , if you could send it couple days befor today, thanks for your comment,
@mealew7 ай бұрын
@@3rdisland477 Thanks so much. Do you have an idea of what the cost would be?
@ejsrocket7 ай бұрын
I have sound from headphone port with instruments played live, but no playback of tape. I know it records properly though after trying recorded tape in another tape deck. What do you think the problem could be? Thank you!
@3rdisland4777 ай бұрын
Follow the video and replace the four caps shown in this video. Good luck
@qbslc8 ай бұрын
Hello 3rd Island! Watching your video, I opened my fostex X28H to replace the belts. Before closing it again everything worked correctly; but after closing it with the rear screws, the device does not turn on. I have measured the adapter and it works fine; Even the input jack works fine, but I don't know anything about electronics and I wouldn't know what to check now. Any suggestion will be very welcome. Thank you so much!! Dan
@3rdisland4778 ай бұрын
Loose the rare screws a little bit and check if it turn on or not, Make sure the control box is fited correctly in it's housing Let me know if this helps Good luck
@qbslc8 ай бұрын
@@3rdisland477 Thank you so much I'll try it and tell you how it went. Fostex is very fragile. I prefer Tascam, but....
@qbslc5 ай бұрын
3rd Island, I forgot to tell you that when I took it apart and put it back together several times, the motor cables became unsoldered, and with my pulse no longer so firm, the solder on the 2nd and 3rd contacts (the ones in the middle of the 4), were touching each other., they overlapped. Could this have damaged some component that is causing it to not turn on at all now? PS.: Fostex is so fragile compared to Tascam... Although both brands are Japanese, what a different engineering!
@TomBaitson8 ай бұрын
Man, I'd love to get mine modified. It barely works, and im recording an album on it