I agree. These are better than comparable budget brands. They look and feel way better than I expected
@jeffl78522 ай бұрын
Strip color - I'd go with Metallic Pea.
@jeffl78522 ай бұрын
What's 'the work top thing or whatever' -- ?
@garysgarage36694 ай бұрын
I have the 46" with 16" side cabinet, its before they made them 24 " deep. I likes it so much, I just bought the 56". This one is 24" deep.
@15DurangoRT5 ай бұрын
Definitely not worth $1k+ in my opinion. There are better options out there.
@karlschauff79894 ай бұрын
This is $900 without the side box, regularly $800 with the 11% rebate. What is better for $800-900 for a 36"x24"? It's not the US General Series 3, which is good but has some shortcomings itself.
@ronswanson944629 күн бұрын
it is made by Montezuma tools. same box just rebranded.
@kurtfirestone27615 ай бұрын
I just seen them at Menards this past weekend and absolutely love the lock system on the drawers so much better than anybody else's
@brandonm60522 ай бұрын
Agree, I'm looking to get back into a wrenching field and will be limited on early funds. I have an older montezuma and it's the same latches since they make them. I just messed with one of these at Menards minutes ago and still may chose one because of the drawer latch style
@vov36896 ай бұрын
I have a odd question does it smell, i want to one of these in my bedroom and wonder if it has a smell
@Xiomaro016 ай бұрын
Can't say I notice any smell. Maybe from the mats that go in the bottom of the drawer, but that'd be about all
@_thejager10 ай бұрын
still going strong? any suggestions on caster replacements, i really want 4 casters that can go any direction also how would it compare to the Montezuma brand? or GEarwrench?
@Codypod11 ай бұрын
I blew out a drawer rail and have absolutely no idea how to replace it and locks if you forget your keys and need to drill out your lock it’s a shit show
@david-rios5 ай бұрын
You do realize is there box or lifetime warranty correct if it long as it wasn't your fault and a rail sounds like it wouldn't be your fault
@breandanwheeler526711 ай бұрын
Glad I ran across this. I’ll definitely check one of these units out for sure
@TheGoodTheBadTheRowdy Жыл бұрын
GAH wish could order. I ordered their mech set and it shipped to my new home in another state
@jimmywells33 Жыл бұрын
Overpriced. Period. They're the same as the Husky "Heavy Duty". Both are 19 gauge too. Too bad people are willing to overpay. Must be nice to have disposable cash like that to just throw away instead of waiting for the market to correct.
@Xiomaro01 Жыл бұрын
You must be delusional. These are made by Montezuma, they're completely different design, slides are much better quality, better paint job, better wheels, and these are drastically more robust than husky HD. Disposable cash no. I just like to put the right amount of money where it should go. Didn't make sense to spend in upwards of $3,000+ on harbor freight icon or used snap on to get less just for heavier steel that I'm not going to need and that most people don't need in general.
@miguelbmx137 Жыл бұрын
So try the slides are amazing not like snap on or matco or husky and other crappy brands the wiggle side to side like crazy!!!!!!!
@tru816indo Жыл бұрын
@@miguelbmx137snap and Matco are light years above husky and masterforce
@HaNg_ALL_ThE_tRaItOrS_hiGh6 ай бұрын
@@miguelbmx137 go ahead and waste 15k on the rape trucks shit then. No one cares!
@georgeturcu57615 ай бұрын
@@Xiomaro01these tool boxes are awesome for the price. When on sale, 800$ out the door( side box not included). I might get the side locker. Great quality for the money. I am getting one as soon as possible. My old crappy one is way too small.
@Rootpuma2.0 Жыл бұрын
Catch can is leaking....best rebuild before you tune it.. 😂
@bennynv8446 Жыл бұрын
How does the side box mount and did it come with everything to mount ?
@Xiomaro01 Жыл бұрын
Yes it comes with everything to mount it! It's a T-Type hanger bracket that bolts onto the top of the side cabinet and then hangs on the roller cabinet. They give you two isolators for the bottom of the box where it contacts to the roller cabinet and then there is a bracket on the back that attaches at the top so they don't separate.
@bennynv8446 Жыл бұрын
Sweet ! I ordered the side box for my blue 56” cabinet. I ordered the hanger and the other bracket extra in case it wasn’t supplied. These boxes are top notch for the price. That just made blue available again after what seemed like a couple years
@Xiomaro01 Жыл бұрын
@@bennynv8446I'm jealous of the blue! They definitely are impressive for the price. Sounds like you can take that extra part back 👍
@miguelbmx137 Жыл бұрын
@xiomaro01 how tall is it from the floor to the top of the tool box?!?!?
@tmanch12 жыл бұрын
I just purchased this one today. I do want to add a second coupler to the manifold. I know its 6mm hex and you are right, it is in there tight. Now exactly how did you get that out? Wish you could have shown that on the 2nd one. Thx
@rubenvargas35472 жыл бұрын
What a horrible review, such a slow video
@hmdwn3 жыл бұрын
You're suppose to break it in for 30 minutes run-time with the drain valve OPEN! I recently purchased this compressor, been sitting in the box for three weeks, rethinking my purchase.
@lurochannel3 жыл бұрын
Is a good compressor just do the break in
@markgreenley2193 жыл бұрын
Did you run it 30 min with valve opened to break it in
@hmdwn3 жыл бұрын
I'm thinking her did not.
@msalazar893 жыл бұрын
You definitely did this the hard way
@CopperStateCorals3 жыл бұрын
Where's the front camera? I want to do this but there isn't a spot for the cam to slot in without modifications
@knifeman8214 жыл бұрын
The snoring sound effect is annoying. Thanks for showing the full 6 minutes of charging, you could just read the manual for fill rate time. Most compressed come from China.
@georgedepuy86164 жыл бұрын
What part of Florida are you in I'm in Pinellas County and looked up that place and didn't find them
@Xiomaro014 жыл бұрын
certifiedmuffler.com/
@drchangtorres4 жыл бұрын
On 11:50. Sensor opening should be pointing to the 3 o'clock 9 position, so it could measure the air flow correctly!
@taylorlindsey74394 жыл бұрын
Jesus Christ no one cares AT ALL about your personal situations .... just tell me about the compressor like the title says
@waltkerbel32964 жыл бұрын
I bought this compressor. In the manual it says to do a 30 min break in. You were the second review I seen that did not do that.
@dougekren64954 жыл бұрын
We are fixing Ford's non baffled valve covers !
@VooDooV64 жыл бұрын
That snoring is fcking annoying
@william380224 жыл бұрын
If anyone buys one of these from Harbor freight I would suggest you get the extended maintenance agreement/extra warranty
@badtolz21224 жыл бұрын
This... Or CP 21gal for $150
@Godfather440554 жыл бұрын
Is this better than the 20gal Husky compressor from home depot?
@chronictwister4 жыл бұрын
I wonder how much it'll cost to have someone do this to my vehicle
@SuperCoyotecaller4 жыл бұрын
If I understand there fix is 2 injectors, one is now above intake valve to rinse back side of intake valve with fuel and detergent. Fixing some of the carbon build up problem by being rinsed with fuel like older injection engines that weren’t direct injection.
@matthewlidel43244 жыл бұрын
Did you take the check valve out of your factory pvc valve cover or leave it in?
@benitoramirez62375 жыл бұрын
What did you do with the camara ?
@logantic5 жыл бұрын
I got a check engine light, did you get one too?
@Xiomaro015 жыл бұрын
Yes, but it went away after a little bit of driving. The ECU is trying to get used to the extra air passing through the system
@logantic5 жыл бұрын
@@Xiomaro01 ok thank you
@logantic5 жыл бұрын
@@Xiomaro01 also how long before the check engine light went away?
@Barrskie1015 жыл бұрын
That looks siiiiiick! I just got a white 2016 f150 xlt and my bumpers and grille are killing because they're chrome! I'm gonna sand and paint them asap. Good job bro!
@21rhocke4 жыл бұрын
Did you end up doing that? I don’t like my chrome bumper either, but I don’t know if I want to alter it that much.
@chris1924fly5 жыл бұрын
Have you used a impact gun for cars or how has it been with your purchase happy?
@luckylarry51124 жыл бұрын
cristian ruiz ,I have am the neighborhood mechanic. I have changed out maybe 20 cars snow tires this week. Having 175#s the break lug nuts is great but sucks on using a die grinder. Hope this helps. Hugo
@itsmeatiq5 жыл бұрын
I picked up one open box for $75. I am an occasional user. I hope it will last for long time.
@Xiomaro015 жыл бұрын
Sweet deal!
@stanleykania71845 жыл бұрын
kzbin.info/www/bejne/rGfLkHmFr6uAmdU
@NutshellAnimations5 жыл бұрын
thats some interesting stuff, Im not the type to be much mechanical but I enjoy getting some info whenever I can you know. Did you edit thie video and clips of this yourself homie?
@Xiomaro015 жыл бұрын
Yeah with what little editing software I had access to. Far from final cut pro
@NutshellAnimations5 жыл бұрын
Xiomaro01 not bad, yeah make use of whatever you have my man, all good! Let me know how you like my animations :)
@glrogers675 жыл бұрын
Dang, it took a long time to fill. I'm in the market to buy a air compressor today and I'm leaning more towards the McGraw oiled 20 gallon compressor. How are you liking it so far after using it? I will be using most of the time for blowing off sawdust and basic shop tools. Probably the hardest test I'll be using it for is a gravity blaster. Thanks for the video.
@Xiomaro015 жыл бұрын
It's going to have better capacity than the 20. The additional pressure is also going to be nice if you're going to be doing media blasting nobody kind. I've been happy with it so far and once it gets up to working pressure It's recovery time is about 2 minutes or so. I'd recommend it
@glrogers675 жыл бұрын
@@Xiomaro01 yeah, I bought one and I'm impressed so far. I have 2 lines hooked up to it, one 1/4" and one 3/8" ( think that's the bigger size). Smaller one is for my blow gun kit and airing up tires and the bigger one is for my impacts.
@openyourcoconut47745 жыл бұрын
Can I buy your old grille lol?
@denoftools5 жыл бұрын
Nice video. When you had the top off did you notice the size of those brushes? Their monsters.
@Xiomaro015 жыл бұрын
They are! I was a little surprised that the commutator wasn't a little more shielded though. I guess they're just relying on all the fan pressure from the case to keep it from getting dirty over time.
@badtolz21224 жыл бұрын
This or 21gal CP clearanced for $150?
@jeffreylindley8455 жыл бұрын
Catch cans that alter internal engine pressure can void the warranty. Just an FYI.
@akmassifier46355 жыл бұрын
Nice truck. Just installed one on my 2014. It was an epic pain in the ass, but worth it if it keeps things from gunking up.
@Daniel-xc3ws5 жыл бұрын
He raises some excellent points
@johnwilkens53115 жыл бұрын
Catch cans are a great idea if you only have a Direct Injection system. Starting in 2017, the 2nd Gen 3.5l Ecoboost (used on the 2017 Raptor) has dual injection (multi-port (MPI) & direct injection (DI)). Allegedly, combining of the MPI with DI will mitigates/avoids the problem of intake valve contamination. If you have only DI, the contamination will vary on vehicle usage, demand, etc.
@jesu39965 жыл бұрын
where did you bought the letters
@petertitle5 жыл бұрын
Hey buddy, is this shop still around, I want to do the same type exhaust to my 3.5 Eco. More or less how much did it cost? Thanks brother