Will this work on F10 550i xDrive?

I do all the work on my own 2016 650i Gran Coupe (currently valve stem seals) one requirement to working on a N63TU is knowing pretty much every curse word known to man!!!!! FYI, I did not pull the engine to do this job. NOTHING is easy on these cars!

Do you have a gas smell now? Curious if the midpipe filters the smell

So many comments, sorry if I’m asking a redundant question. You mentioned since you have the JB4 with catless downpipes, the JB4 automatically clears the check engine light. Mine is not doing that. Is there a special setup I need to do on the JB4 app? Any help would be greatly appreciated.

I have bought these downpipe after your video, then use it for two month and removed it 😅, i was facing an issue with exhaust leak, couldn't find from where, and the long fuel term wasn't reading correctly due to that!, unfortunately the v band size wasn't merging properly with the turbo, the the down pipe doesn't have any upper bracket to hold it, then I bought the Chinese HMD with 100 cell cat, which the fitment was perfect the car run way better than before and the smell and exhaust leak all gone. one small comment that the 100 cell is showing me in my diagnostic that the car sense poor efficiency cat, without check engine light. how any why i went with HMD because no one did it and i felt i will be the first one, but i will take the risk then i say how the quality is and how heavy is the material is. soon you will see a video about it.

Has anyone done the sports + operations yet? Whats the difference between sport and sport +?

He passed away.

It looks a lil intimidating but worth the deal

What do I need to run e85 on these or even e30 ?

Is it only me that doesn’t see where were the MAF’s reinstalled?

Great job

Does the high beam assist work? Noticed you don’t have the auto button on the stalk so not sure if it would work or not?

I’ve done this which the car running, not had an issue

How's the smell? I've got the exact same car... I want to install the exact same downpipes...

long live the n63! :) any videos on the infamous oil consumption issue or did the TU sort it out for ya?

Yea you just created resistance you wont get much hp with that either

I think you have the rotors on the wrong side. The Cut in slash is supposed to face forward I believe \ not / I could be wrong

so question where do we connect the mass air flow sensor or do we not connect it anyone know?

I know that you know way more than me about these cars, but I asked liqui moly and they said this oil isn't compatible with out cars and might increase wear because it doesn't meet the BMW longlife-01 fe that our 550s need. So idk what to do now, because I wanted to use the oil but they said otherwise.

Thank you, sir. Great video; informative and easy-to-follow instructions. I appreciate it.

You can see the guy has the conversation already factored in the numbers 15 percent drive train loss

Great video

wow am I now excited to hear my car open up :P

You didn’t connect Maf sensors?

Just did mine thank you so much for this but man mine was hard to push in lol

Got installed one of does 2 times (first broke due the speed), both times side wings dont fully go to the frame of lights, why is that, how can I make it go in fully?

Hi mate I know this was 7 years ago but am lucky enough to finally own my dream m5 so thought a week into ownership I will give the big girl some nice new blood/oil lol so done everything as you did but used a different oil filter tool and it slipped and I think I have broken a sensor or something because when I filled the car back up and put the front end back down it has trouble starting and I have engine management light on plus a break fault plus a traction fault and drivetrain fault what could I have done thanks hope you see this

how on earth did you get 489 hp to the wheels for a stock engine when it got 445hp to the crank. how do I do this

WHERE DID U GOOO

I am having a hard time understanding how other than looks this does anything for the cold air. The current system pulls from the same area the new ones do? You removed the inlet vents to push the new ones through into the radiator area. How’s the new hoses and filters really changing anything as far as air temp?

for the bracket on the bottom of the old downpipes after removing the 11mm nuts did the screws stay in place or come off as well bcuz i’m having trouble getting it too seperate

Is it the same coolant for the charge air cooler (2nd reservoir for intercoller ) for me to top it off Thank you for the help 🙏🏽

Do you smell much more petrol now ?

?? Maf sensor?

Will this tune help my downpipes to run better and stop it from running a little funky?

Very nice video and solution. I think it's the best way of making that I've seen so far. I want to replicate this but I'm really worried about the rain and moisture entering the engine through these. Have you had any issues with that? And thank you for making that video for us.

Unless you have a custom tune that takes advantage of the lower watergate duty cycle from the added airflow, youll see no gains and only maybe better throttle response. All ots maps target a predetermined temp

Check engine light for sure

I wonder what ever happened to this guy?

Have you had any problems with ur spacers? I’m thinking to have 20mm rear 15 front. I’m just not sure if it affect any ride quality etc

Looks great that bruv.. Gonna put one on my f11 soon. It's the dark grey mine so I'm gonna have to get it sprayed first.. But I love it.. Greetings from Manchester UK..

I have an 2011 550i it didn’t really fit I had to take the whole exhaust off and now I have to go get it sent to get welded

I could swear those wheels are style 351 19 inch but what tire size? They seem to have much meat on them ??

Hey man did you have any issues with the original strut bolts being to short? I just bought the same bar from Pro Tuning in Latvia and before I install it I wanted to make sure the original bolts are long enough. I know you did the H&R springs did you notice if the bolts are good, installing the bar ends obviously shorten the bolt threads, just wanna be sure it's long enough

🙏🏽🙏🏽🐐

God how I wish you lived near south Alabama. I'm only really interested in performing a few mods on our 2018 650i GC (N63TU) in order to mitigate the heat of these engines, but your help/guidance would be invaluable. There is just so much to remove with any of these mods it's seems very daunting, even though I'm quite apt.

This is a top tier channel, brother! The size of your following doesn’t do proper justice! 💪🏾

You and I have very similar taste; your F10 looks a heck of a lot like what mine will look like once I’ve made some more changes (I just got mine, which is also black, two weeks ago). Great video, great channel, and great car!

Nice numbers !!

I wonder if you are to leave the maf sensors unpluged when the jb4 n63tu is installed?